GE SIMON XT Manual de usuario

Simon XT User Guide

Code Changes

System Programming

To enter system programming mode, do the following:

1. Enter the system menu by pressing the scroll up/down buttons or the Enter button in

the upper right of the panel.

2. Scroll up/down to System programming, and then press Enter.

3. The panel displays Enter code.

4. Enter your master code, and then press Enter.

Access codes

There are three types of access codes: master, user, and duress.

Master code. The master code is your most powerful code and can be used for all user

operations including programming. To change the master code, do the following:

1. Enter the System programming menu.

2. Scroll up/down to Access codes, and then press Enter.

3. Scroll up/down to Master code, and then press Enter.

4. The current value of the code now flashes.

5. Enter a new code (use correct length), then press Enter.

6. Press Status repeatedly to exit.

The initial value of the master code is 123, 1234,12345, or 123456, depending on the

installer- programmed access code length.

User codes 1 to 8.There are eight user codes, which can be used for many user

operations, but not sub disarming, programming, or bypassing sensors.

To change a user code, do the following:

1. Enter the System programming menu.

2. Scroll up/down to Access codes, and then press Enter.

3. Scroll up/down to the user code you want to change, and then press Enter.

4. The current value of the code now flashes.

5. Enter a new code (use correct length), then press Enter.

6. Press Status repeatedly to exit.

Initially, all user codes are blank. A user code can be deleted by pressing Disarm while

the code is being changed.

Duress code. The duress code, when used in place of another user code, generates a

silent duress alarm which is reported to the central monitoring station.

To change the duress code:

1. Enter the System programming menu.

2. Scroll up/down to Access codes, and then press Enter.

3. Scroll up/down to Duress code, and then press Enter.

4. The current value of the code now flashes.

5. Enter a new code (use correct length), then press Enter.

6. Press Status repeatedly to exit.

Initially, the duress code is blank. The duress code can be deleted by pressing Disarm

while the code is being changed.

Otros manuales para SIMON XT

11

Tabla de contenidos

Otros manuales de Panel de control de GE

GE

GE ATS4000 Instrucciones de funcionamiento

GE

GE NX-4-EUR Manual de usuario

GE

GE Interlogix Manual de usuario

GE

GE Aritech ATS1110 Manual de usuario

GE

GE EST iO64 Manual del producto

GE

GE Allegro 60-874-95R Manual de usuario

GE

GE SIMON XT Manual de usuario

GE

GE QuickPanel+ IC755CxS06RDx Manual de usuario

GE

GE NetworX NX-8E Manual de usuario

GE

GE NX-1308E - Caddx 8 Zone LED Keypad Manual de instalación

GE

GE Multilin 889 Manual de usuario

GE

GE 45633 Manual de usuario

GE

GE Concord express Manual de usuario

GE

GE Entelli-Switch 250 Manual de usuario

GE

GE NetworX NX-6 Manual de instalación

GE

GE SIMON XT Instrucciones de funcionamiento

GE

GE Zenith Controls MX150 Manual de usuario

GE

GE NetworX NX-6V2 Manual de instalación

GE

GE IC754CSF15CTD Manual de instalación

GE

GE NetworX NX-6V2 Manual de usuario

GE

GE SIMON XT Manual de usuario

GE

GE Kilsen KFP-CF2 Manual de usuario

GE

GE Alliance AL-2017 Manual de usuario

GE

GE ZITON ZP3 Manual de usuario

Manuales populares de Panel de control de otras marcas

RDZ

RDZ PC-HRX Manual de usuario

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manual técnico

Efka

Efka Variocontrol V810 Manual de usuario

Cebora

Cebora 208-10 Manual de usuario

AMX

AMX AutoPatch CP-15 Manual de usuario

Satel

Satel CA-6 KLED-S Manual de usuario

Evolution

Evolution IQ plus 800 Manual de usuario

Fagor

Fagor 8040 TCO CNC Manual de usuario

Trane

Trane ComfortLink II XL950 Control Manual de usuario

AKO

AKO PROCool AKO-17635-2 Manual de usuario

ABB

ABB 6136/30M-101 Manual de usuario

Telikou

Telikou BK-603 Belt Pack Manual de usuario

Mapei

Mapei Mapeheat Thermo Touch Manual de usuario

Bosch

Bosch D9412GV4 Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manual de usuario

Sminn

Sminn BOX L VF1L EI Manual de usuario

Balboa

Balboa TP600 Manual de usuario

Nice

Nice HSCU1 Especificaciones técnicas