GE AEV07KP Manual de usuario
GE Window Type Air Conditioner
AEV07KP, AEV09KP, AEV12KP, AEV18KP,
AEV24KP, AEE07KP, AEE09KP, AEE12KP,
AEE18KP, AEE24KP
Use & Care Manual
GE
Appliances
Contents
CARE AND MAINTENANCE ............................... 14
Caution ................................................................. 14
Care and Maintenance .................................. 15
Trouble Shooting Guide ................................. 16
After Service ....................................................... 17
STRUCTURE MECHANISM AND
INSTALLATION ......................................................... 2
Function ................................................................. 2
Operating Condition ......................................... 3
Power Requirement .......................................... 3
Installation ............................................................ 4
Notes for Installation ........................................ 7
OPERATION PROCEDURE.................................... 8
Part Identification .............................................. 8
Air Direction Adjustment ................................. 8
Operation for Mechanical Model ................. 9
Operation of Control Panel for
Electronic Model ................................................. 9
Operation of Remote Control for
Electronic Model ............................................... 10
Operation Tips ................................................... 13
To get the full benefit from your new Window Type Air Conditioner, please read this Use & Care Manual carefully
before operating the unit.
Thank you for choosing a GE Window Type Air Conditioner. Please keep this manual for future consultation.
GE Window Type Air Conditioner
AEV07KP, AEV09KP, AEV12KP, AEV18KP, AEV24KP,
AEE07KP, AEE09KP, AEE12KP, AEE18KP, AEE24KP
Pub. No. M11035L
Structure Mechanism and Installation
2
FUNCTION
Introduction
Window type room air conditioners of GE can regulate the room
temperature and dry the room. It is convenient for your work, study
and life. It can be widely used in residence, shop, hotel, office, library
and laboratory, and so on.
Cooling in summer
In hot summer, Air conditioner can cool down the
room air by transferring heat out.
Dehumidifying in rainy or humid season
Air conditioner can dehumidify and make the
room air dry and comfortable.
Exchange fresh air
Open storm door to keep the fresh air in the room.
Room
temp.
.
Spring
Summer
Autumn
Wind
direction
Winter
Dry
Fresh Air
Structure Mechanism and Installation
tS r noitallatsnI dna msinahceM erutcu
3
OPERATING CONDITION
Please operate air conditioner in the correct conditions as following.
COOL mode operation
Outdoor temperature should be in range of 16 ~ 43°C (61~86°F), otherwise it is possible for air conditioner
to breakdown.
Room humidity should be lower than 90%.
Otherwise, it is possible for air conditioner to dew at air conditioner surface and even drop water after
running for so much time. But this is normal.
POWER REQUIREMENT
Rated voltage and voltage range: 230V~±10%
• The electric components will be damaged when the
voltage is too high. If the voltage is too low, the
compressor will vibrate violently to damage the
refrigerant system and easily cause the compressor
and electric components not work.
Earth wire To ensure the reliable earthing, please do not connect earth wire to the following places:
Water pipe
The ground must be connected.
• Special socket must be used. Furthermore, the socket
and wiring must conform to the wiring regulations.
And the earthing method must be reliable.
• In fixed circuit, there must be electricity leakage
protection switch of enough power capacity and air
switch with enough space.
This appliance is not intended for use by persons (including children) with reduced phisical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of appliance by a person reponsible for their safety.
Children should be supervised to ensure that they don not play with the appliance.
Structure Mechanism and Installation
4
INSTALLATION
Installation precaution:
Window type conditioner is so valuable and the improper
installation of it will cause a lot of damage! Please associate the
professional technician to install the unit and don't install it by
yourself. Otherwise, we are not responsible for the damage like
this.
Location:
•The condensation water must be drained away conveniently.
•Install air conditioner unit far away from TV set or radio etc. to avoid disturbing video or voice.
•In salt and coastal area or place where is near thermal springs and polluted by sulphurous gas, or other
special areas, please contact the seller before use.
•Avoid a place where is possible for in flammable gas to leak out.
•Avoid other heat sources or direct sun light.
•Avoid a place where is easy for children to touch.
• Don't use the unit in the immediate surrondings of a laundry, a bath, a shower or a swimming pool.
•For window type air conditioner with remote control, install in a location where is strong electromagnetic
disturbance, you should contact the seller in advance to avoid the malfunction in use.
How to install:
• Choose a location where there are no any obstacle surrounding the unit , and the plug is accessible.
•Prepare the installation hole slightly bigger than unit size.
•Choose the installation space according to the following diagram.
The distance of obstructions from window unit inside
should be upper 150mm. left 150mm, right 150mm
and back 500mm.
Structure Mechanism and Installation
Structure Mechanism and Installation
5
Installation procedure:
1) Remove the sticker from the front panel.
2) Put the unit into the installation hole.
•When installing the unit, it should be slanted down to the back to
avoid the enlargement of noise or vibration. (Slant between 6-10mm.)
(Shown at right figure.)
•The installation place should be strong enough to avoid the
enlargement of noise or vibration.
3) Fill up sews in the cabinet with sponge or foam.
Installation assistance:
•Use iron support
The installation hole should be strong
enough to support the air conditioner.
If it cannot, iron support has to be used
outdoors.
Iron support should be fixed on the
building (Shown at right figure.)
•Use sunshade board
Air conditioner should avoid anything to
be dropped into it and avoid direct
sunshine. If there is no cover on it, you
should contact the seller for installing
the sunshade board. When installing the
sunshade board, don't let it block the air
inlet at the side grille.
Horizontal line
6~10mm
Sunshade board
Wall
Wooden frame
Rubber plate
Support
Horizontal line
6~10mm
Structure Mechanism and Installation
6
Drain water:
To get the maximum cooling efficiency, the air conditioner is designed to splash the condensation water
on the condenser coil.
To the cooling only unit,If the splashing sound annoys you, you can provide an outside drain by using the
following procedure, whichmay however cause a small loss of performance.
1. Slide out the chassis from the cabinet.
2. Remove the rubber plug from the body base plate.
3. Install the drain pan to the corner of the cabinet with 2 screws.
4. Connect the drain hose to the outlet on the drain pan bottom.
5. Slide the chassis into its original place in the cabinet.
Note:
• Drain pan and drain hose must be installed before using reverse cycle models.
•Drain hose or tubing can be purchased locally to satisfy your particular needs.
Structure Mechanism and Installation
Structure Mechanism and Installation
7
NOTES FOR INSTALLATION
Remove
Before removing air conditioner to the other place, you should contactthe
seller firstly.
Then it must be done under the direction of the professional technician. In
addition, the charge of this must be paid.
Noise
•Install in a location where is firm enough to avoid the enlargement of
noise and vibration.
•Don't put anything in front of the outlet of outdoor unit to avoid
increasing noise.
•Be sure that hot air or noise will not inconvenience neighbors.
•Please contact the seller as soon as there is strange noise during
operation.
•Please use the safety support.
Electric wiring
•Must connect with ground reliably.
•The exclusive circuit must be used. But removable socket can't be used
because poor contact of it can cause over heat or fire.
• Don't pull the power cord strongly.
•In fixed circuit, there must be electricity leakage protection switch and
leakage current is less than 30mA.
•Connecting method between air conditioners and power cord and
interconnecting method of each individual element with one another
should accord with wiring diagram on the unit.
•The air conditioner should be installed in accordance with national
wiring regulation.
•An all-pole disconnection switch having a contact separation of at least
3mm in all poles should be connected in fixed wiring
•Air switch (thermal-magnetic breaker) should be installed in the circuit
•If the supply cord is damaged, it must be replaced by the manufacturer
or your dealer or a qualified person to avoid a hazard.
•All the electrical work must be done according to the local wiring
regulations.
Operation Procedure
8
PART IDENTIFICATION
AIR DIRECTION ADJUSTMENT
Vertical airflow direction vane
(Airflow direction adjustment up and down).
The vertical airflow direction vane is controlled by positioning the vane to
discharge the air upwards, downwards or straight out.
Ventilation Lever
When the slider at the:
-"OPEN" position, the ventilation
door opens to allow air, smoke or
odors to be expelled from the
room.
When the slider at the:
-"CLOSE" position, the ventilation
door is closed and the air will be
circulated inside the room and
conditioned.
Front grille
Air inlet louver
Cabinet
Air filter
(behind the front intake grille)
Front intake grille)
Control Panel Power cord
Panel outlook picture, just for reference, please take the real until as standard.
Ventilation Lever
Este manual sirve para los siguientes modelos
9
Tabla de contenidos
Otros manuales de Acondicionador de aire de GE
GE
GE AEZ25 Series and Instrucciones de funcionamiento
GE
GE AHW05 Manual de usuario
GE
GE AEZ18 Manual de usuario
GE
GE AEH08AL Instrucciones de funcionamiento
GE
GE AGW18 Instrucciones de funcionamiento
GE
GE AVP12 Manual de usuario
GE
GE AHWG10BA Instrucciones originales
GE
GE AVH05 Instrucciones de funcionamiento
GE
GE AGQ05LH Manual de usuario
GE
GE AGL12 Instrucciones de funcionamiento
GE
GE Zoneline AZ28E09DAB Instrucciones de funcionamiento
GE
GE AKLK18 Manual de usuario
GE
GE ASV12AL Manual
GE
GE ZoneLine 7500 Series Manual de usuario
GE
GE APFD06 Instrucciones de funcionamiento
GE
GE Appliances AKH18DNT1 Instrucciones de funcionamiento
GE
GE GAIRZ09IG Series Instrucciones de funcionamiento
GE
GE AEQ25 and Instrucciones de funcionamiento
GE
GE Zoneline AZ85E18DAC Manual de usuario
GE
GE AJT08DA Instrucciones de instalación
