GE Security Simon XT Manual de usuario
Simon XT User Guide
Bypassing Zones
Bypassing a sensor allows you to open the sensor while the system is
armed. For example, if you Doors & Windows are armed and you want to
open your kitchen window but do not want to disarm the entire system, then
you can bypass the kitchen window sensor and then open the kitchen
window without causing an alarm. Bypassed sensors are automatically
unbypassed when the arming level is changed to a level where the sensor
is not active.
Bypassing
1. Press BYPASS and enter the master code.
2. Scroll up/down until you reach the sensor to be bypassed.
3. The display shows, for example, Sn 1 Front Door on the first line.
4. Press Enter to bypass (deactivate) the sensor.
5. When a sensor is bypassed, the panel displays Bypassed on the second line.
Unbypassing
1. Press BYPASS and enter the master code.
2. Scroll up/down to the sensor to be unbypassed. The sensor must be currently
bypassed.
3. Press Enter to unbypass (reactivate) the sensor.
4. The panel removes the word Bypassed from the second line of the display
Otros manuales para Simon XT
3
Tabla de contenidos
Otros manuales de Panel de control de GE Security
GE Security
GE Security ZP3 Manual de instrucciones
GE Security
GE Security NetworX Series NX-8V2 Manual de usuario
GE Security
GE Security 1200C Manual de usuario
GE Security
GE Security Vigilant VS1 Manual del producto
GE Security
GE Security NetworX Series Manual de instalación
GE Security
GE Security 1200C Manual de usuario
GE Security
GE Security NX-1750 ProxPad Manual de usuario
GE Security
GE Security 1501 Manual de usuario
