GD Saber PanelMount NVIS 10 Manual de usuario
User’s Manual
Saber PanelMount™ NVIS 10
Standard Panel Mount NVG-Compatible 10.4" LCD Monitor
Part Number 90-3104-005
Manual P/N: 3104-005-96
Revsion 0
September 2016
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 2
Rev. No. ECN No. Date Description
— — — —
1 Revision History
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 3
Please take a moment...
...to record the following information in the space provided below. Should the need arise
to contact General Digital regarding your LCD monitor, this information will help us to
better serve you. You will find the model number/serial number label affixed to the rear
of your monitor.
Model Number: _______________________________________________________________
Serial Number: _______________________________________________________________
Date Received: _______________________________________________________________
Trademarks
All trademarks in this publication are the property of their respective companies.
Copyright
Information in this document is subject to change without notice.
© 2016 General Digital Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of General
Digital Corporation is strictly forbidden.
Disclaimer
General Digital Corporation shall not be liable for errors contained herein or for inci-
dental or consequential damages in connection with the furnishing, performance, or use
of this material.
Appropriate Usage Policy
General Digital Corporation components should not be used in medical devices with life
support functions, safety equipment (or similar applications where component failure
would result in loss of life or physical harm), aerospace equipment, telecommunication
equipment (trunk lines) or nuclear power control equipment. Contact a General Digital
representative before using General Digital devices for any applications other than those
recommended by General Digital. General Digital assumes no responsibility for any
damage resulting from the use of a General Digital device which does not comply with
the instructions and precautions specified in this manual.
2 For Your Records
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 4
1 Revision History 2
2 For Your Records 3
3 Table of Contents 4
4 Precautions 5
4.1 Installation ...................................................................................................... 5
4.2 Characteristics of the LCD Screen ................................................................. 5
4.3 Transportation................................................................................................. 6
4.4 Usage Recommndations ................................................................................. 6
4.5 Disposal of the Monitor.................................................................................. 6
5 Package Contents 7
6 NVIS Filter 8
7 Connections 9
8 Setup 10
8.1 Monitor Connections.................................................................................... 10
8.3 Selecting the Proper Video Mode ................................................................. 10
8.8 Color Temperature and Gamma Adjustment .............................................. 10
9 Operation 11
9.1 OSD Functions .............................................................................................. 11
9.1.1 Image................................................................................................ 11
9.1.2 Display ............................................................................................. 11
9.1.3 System.............................................................................................. 12
10 Serial Port 13
10.1 Serial Specification........................................................................................ 13
10.2 Serial Echo ..................................................................................................... 13
10.3 Keypad Data .................................................................................................. 13
10.4 Serial Command Set...................................................................................... 14
11 Maintenance 15
11.1 Display Overlay Cleaning............................................................................. 15
12 Troubleshooting 16
13 Specifications 17
14 Control Drawing 18
15 Warranty 19
16 Contact Information 21
Appendix I – Video Mode Support 22
Appendix II – Cleaning AR Filters 24
3 Table of Contents
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 54 Precautions
4.1 Installation
General Digital recommends that you install or leave the monitor:
• In a place free of extreme temperatures, i.e., away from radiators, heating vents,
direct sunlight.
• In a place free of mechanical vibration and shock.
• In a place far from any equipment that generates a strong magnetic field.
• In a place free of inordinate amounts of dust, dirt or sand, i.e., an open window or
outdoor exit. If setting up temporarily in an outdoor environment, be sure to take
adequate precautions against airborne dust and dirt.
• On a stable surface where the monitor will be safe from tipping over.
• Ensure that vents are kept free of obstruction and airflow remains unrestricted at
all times.
• If the unit is equipped with a grounded AC line input connector, ensure that a reliable
grounding path is maintained. Units so equipped are intended to be connected to
ground.
• Ensure that the unit is located where the temperature remains within the recom-
mended ambient temperature range listed in the Specifications.
4.2 Characteristics of the LCD Screen
• Keep the LCD from facing direct sunlight for extended periods as this can damage
the screen.
• The LCD screen may lose uniformity or otherwise malfunction if pushed, scratched
or has a heavy object set upon it.
• If the monitor is used in a cold place, a residual image may appear on the screen.
This is not a malfunction. The screen returns to normal as the temperature rises to
a normal operating level.
• If a still picture is displayed for a long time, a residual image may appear for a while.
The residual image will eventually disappear.
• The LCD panel becomes warm during operation. This is not a malfunction.
Important Notes on the LCD Screen Characteristics
Please be aware that, although the LCD screen is made with high precision technology, the
manufacturer’s specifications allow for slight optical anomalies. If your LCD screen exhibits any
minor anomalies, it is not an indication of a malfunction. General Digital inspects each screen
to even more rigid specifications than the manufacturer’s and will not ship any product found
to be substandard.
Also, optimal performance is achieved after the monitor has reached a stable internal oper-
ating temperature. At ambient room temperature (72° F/22° C), this may require as long as
30–60 minutes.
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 64 Precautions
4.3 Transportation
• Disconnect all cables from the monitor and grasp the support and base sections
of the display stand firmly with both hands when transporting. If you drop the
monitor, you may be injured or the monitor may be damaged.
• When you transport this monitor for repair or shipment, use the original carton and
packing materials. Failure to do so may void the warranty.
4.4 Usage Recommendations
• When unused for extended periods of time, set your PC to DPMS. If using a screen
saver, set it to the active screen mode.
• For each hour of looking at the monitor, let your eyes rest for 5 minutes. This will
reduce eye fatigue.
4.5 Disposal of the Monitor
Do not dispose of this monitor with general household waste. General Digital
encourages recycling whenever feasible. Disposal of this monitor must be
carried out in accordance with the regulations of your local sanitation authority.
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 75 Package Contents
Please take a moment to ensure that you have received the following items. Report any
discrepancies immediately.
One (1) Saber PanelMount NVIS 10:
Model Number NPA-10X-9028-123-00-32-04-ID59-189
One (1) Documentation CD with Saber PanelMount NVIS 90-3104-005 User’s Manual
in PDF format; and Adobe®Acrobat®Reader software, which is used for viewing the
documentation
One (1) Shipping Container
Also included will be any options and/or accessories you ordered with your monitor.
Please refer to the packing slip for a complete listing of items shipped.
IMPORTANT!
Please save your custom-designed shipping container for warranty returns as
needed. Shipping in an unauthorized container may void the warranty.
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 86 NVIS Filter
The 90-3104-005 has been designed with an NVIS-compatible backlight. An NVIS filter
is installed between the system backlight and LCD to filter the display for NVIS color
requirements. The user is responsible for dimming the LCD backlight in NVIS mode to
meet NVIS radiance requirements.
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 97 Connections
DESIGNATOR FUNCTION TYPE
CN1 DC Power Input 2W2 Plug
+9 to +36 VDC (+28 VDC Nominal)
CN3 System Serial Port DE-9 Plug
CN4 DVI Input 1 DVI-D Socket
CN5 DVI Input 2 DVI-D Socket
DC Power Input Connector: CN1
PIN SIGNAL
A1 +VDC
A2 Ground
System Serial Port Connector: CN3
PIN SIGNAL
1 NC
2 Rx
3 Tx
4 NC
5 Ground
6 NC
7 NC
8 NC
9 NC
Saber PanelMount NVIS 90-3104-005 User’s Manual
Page 108 Set-up
8.1 Monitor Connections
Connect the input power to the 2W2 connector (CN1).
8.2 Selecting the Proper Video Mode
Configure your video controller, operating system and or application program to run in
the desired video mode (e.g., 640 x 480, 1280 x 1024, 1600 x 1200, 1920 x 1080, etc.).
8.8 Color Temperature and Gamma Adjustment (Available on select configurations)
Inherently, LCD displays do not support a color gamut as large as a traditional CRT.
Unless operators use sophisticated instrumentation to measure the color output of the
LCD display, calibration of the color gamut is subjectively performed. General Digital
offers a simple calibration technique that has proven to yield desirable results.
Note: Because this document is intended for PDF creation, an accurate gamma chart could
not be included within the document. A gamma chart can be downloaded from our Web site:
http://www.generaldigital.com/files/support/graphics/gamma-chart-1280x1024.png.
Below (see Figure 3) is a representation of a standard gamma chart used for color
correction. The gamma chart consists of four rectangular bars–one for each of the primary
colors (red, green and blue) and one for gray. Running down the center of each bar
are five squares displayed at 50% luminance of the surrounding area. The surrounding
area contains a checker-board pattern of alternating 100% luminescent pixels and black
pixels.
Note: The monitor should be running for at least 30 minutes prior to adjusting.
In a darkened room, adjust the individual color settings for the red, green and blue
outputs until the center squares appear to blend into the surrounding area. Finally,
adjust the bright-ness and contrast until the center squares nearly disappear.
Note: Repeat steps 1–5 for each video mode you wish to use.
Figure 3
Tabla de contenidos
Otros manuales de Monitor de GD
