GCC Technologies Elite 12 Series Guía de inicio rápido

Using IP/P2P with GCC Elite XL8/Elite XL16/Elite XL20

and Elite 12 Series printers.

Download and install IP/P2P on your

Windows 98 or Windows Me System

Open up IP/P2P from the Programs List.

Now click on the ‘Printers’ button.

You will note that the

Max Hops and IP Port

Windows are already

filled in. These values

can remain unchanged

during this installation.

You will now see a window as

shown on the right. You may or

may not see any printers listed. If

this is your first installation there will

be no printers listed in this window.

Note:

When installing an Elite 8/12/16 or 20

the Find Printers WILL NOT function,

you will need to enter your printer

information manually.

Enter the following:

IP Address of your printer;

aname for your printer

the port number ‘3300’

a Printer Description

such as GCC Elite 12, Elite XL20,

Elite XL8 or Elite XL616.

Once this information is entered in the

appropriate fields you will click on

‘Add’

You will notice when you click ‘ADD’

your printer now shows in the Available

printers window with the Designators

SMP which means this is Selected,

Manually Entered and Permanent.

Click OK to close this window and then

click OK on the remaining IP/P2P

window, to close out of if IP/P2P.

Now open your ‘Printers’ Folder

Assuming you have already

installed your GCC Elite 12 as

a local printer it will be available

in this window.

Place your cursor over the ICON

and, using a Right Click select

properties from the drop down

menu.

Select the ‘Details’ Tab on the

‘Properties’ window.

From the Details Tab you will click on

the down arrow in the ‘Print to the following

Port window.

At this point you will see your Printer

Listed as you entered it in the IP/P2P

Window earlier.

Select the printer port listed and click ‘Apply’

You will see the below message, click OK.

Verify the port is displayed in the Print to the

Following Port’ window and also verify that

you have GCC Elite 12xxxx selected as the

driver to use. The specific driver name will

depend on which specific printer model you

have installed.

This example shows a GCC Elite 1212

Click on ‘Spool Settings’ and select

‘Disable Bi-Directional Printing’

Now go to the Postscript Tab

Click on Advanced

On the next Window

Select Pure Binary Data

Click OK

…….then click Apply

Now go back to the General Tab.

Click on Print Test Page.

Your Windows 98 or Windows Me

Test Page should print.

You may now close the properties window, you have successfully set up LPR Printing

for your GCC Printer using IP/P2P.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de GCC Technologies

GCC Technologies

GCC Technologies Elite 21DN+ Manual de usuario

GCC Technologies

GCC Technologies Elite Color 16 series Actualización de firmware

GCC Technologies

GCC Technologies Elite Color 16DN Manual de usuario

GCC Technologies

GCC Technologies Elite XL-1208 Instrucciones de instalación y mantenimiento

GCC Technologies

GCC Technologies RX Series Manual de usuario

GCC Technologies

GCC Technologies Elite Color 16 series Actualización de firmware

GCC Technologies

GCC Technologies T500 Manual de usuario

GCC Technologies

GCC Technologies Elite 12/1200N Instrucciones de montaje

GCC Technologies

GCC Technologies JV-240UV Manual de usuario

GCC Technologies

GCC Technologies 21 Series Manual de usuario

GCC Technologies

GCC Technologies Elite 21DN Manual de usuario

GCC Technologies

GCC Technologies LaserPro C180II Manual de usuario

GCC Technologies

GCC Technologies Elite XL-20/600 Manual de usuario

GCC Technologies

GCC Technologies Expert Pro Series Manual de usuario

GCC Technologies

GCC Technologies 16 Manual de usuario

GCC Technologies

GCC Technologies JF-240UV Manual de usuario

GCC Technologies

GCC Technologies Elite XL 20ppm Manual de usuario

GCC Technologies

GCC Technologies LaserPro Spirit Series Manual de usuario

GCC Technologies

GCC Technologies Elite XL 40 Manual de instalación y operación

GCC Technologies

GCC Technologies LaserPro StellarMark IFII Series Manual de usuario

GCC Technologies

GCC Technologies JF-2418UV Manual de usuario

GCC Technologies

GCC Technologies Elite Color 16 series Actualización de firmware

GCC Technologies

GCC Technologies Elite XL Manual de usuario

GCC Technologies

GCC Technologies Elite XL-20/1200 Instrucciones de instalación y mantenimiento

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario