GBF PL960 Series Manual de usuario
G B F
WiFi IPDoorbell
USER MANUAL
41100101
WELCOME
Congratulations on purchasing the GBF PL960 Series of IP
Doorbells. Our factory engineers were the first to enable multiple
security camera monitoring through smart handheld devices and
now have used that expertise to bring you a full-featured IP Video
Doorbell system that allows you to monitor and interact with
visitors at your door, from anywhere your mobile device has a
WiFi or data connection. Please read these instructions carefully
and follow all of the required steps during setup to ensure your
enjoyment of a fully functional IP Doorbell system in minutes. You
may connect the PL960 Series of IP Doorbells to your LAN (Local
Area Network) either through a Wireless (WiFi) connection or a
Wired (Ethernet Cable) connection. As with any video and audio
streaming device, wired connections are preferred over WiFi, but
the convenience of not requiring wires from your IP Doorbell
location to your router may be the determining factor in your
installation.
Note: The GBF IP Doorbell System only works with 2.4GHz WiFi
and is incompatible with 5GHz WiFi.
CONTENTS
Package Contents ………………………………........………………………….4
Device Illustrations .…………………………………...………………………….5
1.0 Installation ………………………………………………………………………6
Installation Wiring Diagrams ……………………..….…………………….. 7
2.0 Configuration Preparations ………............………………………… 10
3.0 Network Configuration .......................... ………………………….12
3.1.1 Configuration Using the Android App ............... 12
3.1.2 Configuration Using the iOS App .......................13
3.2 Adding a configured or wired IP Doorbell ................... 14
3.2.1 LAN Search ........................................................ 14
3.2.2 QR Code Scan .................................................... 14
3.2.3 Manually ........................................................... 15
4.0 Using the ControlCam2 App ............................................... 15
4.1 IP Doorbell Device Settings ......................................... 15
4.1.1 Changing Device Name, Username, and
Password .................................................................... 15
4.1.2 Unlock Time ...................................................... 16
4.1.3 One-Key Unlock .................................................16
4.2 Advanced IP Doorbell Device Settings ........................ 16
4.2.1 Modify Device Password .................................. 16
4.2.2 Modify Unlock Password ...................................17
- 1 -
4.2.3 Motion Detection ………………………………………….. 17
4.2.4 Set Time ............................................................ 17
4.2.5 Reboot/Restore .................................................18
4.3 Deleting a device from the App ...................................18
4.4 ControlCam2 Doorbell Connection Operation ............ 18
4.4.1 Answering a Call ................................................ 18
4.4.2 Unlocking the Door ........................................... 19
4.4.3 Monitoring the Outdoor Station ……………………. 19
4.4.4 Image Capture ………………………………………………. 19
4.4.5 Video Record ………………………………………………….20
4.4.6 Silencing Audible Doorbell Notifications …………20
4.4.7 Silencing Motion Detection Alerts …………………. 20
4.4.8 Selecting Custom Ringtones and Motion Alerts .20
4.4.9 Accessing recorded videos/images ………………….21
4.4.10 App Mode …………………………………………………….21
4.5 User Account Configuration ……………………………………..22
4.5.1 Change User Account Password……………………….22
4.5.2 Change Verification Question and Answer ……..22
4.5.3 Logging Out of the App …………………………………..22
5.0 Keypad Programming ………………………………………………………23
5.1 Modify the Programming Password ………………………… 23
5.2 Enter Programming Mode ………………………………………..23
- 2 -
5.3 Set Unlock Duration Time …………………………………………23
5.4 Add User Access Codes …………………………………………….24
5.5 Delete User Access Codes ……………………………………….. 24
5.6 Delete User Access Codes Directly …………………………… 24
5.7 Setting the Length of the Access Codes and Programming
- 3 -
Password ……………………………………………………………….. 24
5.8 Delete All Settings (Maintains Programming Password)26
5.9 Factory Default (Keypad Settings only) ……………………. 25
Troubleshooting ........................................................................26
Appendix A: Installation Tips ………………………………………………… 29
WiFi ………………………………………………………………………………. 29
Weatherproofing ………………………………………………………….. 30
Wiring …………………………………………………………………………… 31
Keypad …………………………………………………………………………..31
Appendix B: Disabling the IP Doorbell SSID Broadcast ..............32
(1) GBF PL960M/QPM/TPM IP Doorbell
(1) Metal Back Box
(1) External Wi-Fi Antenna with 3’ Cable
(1) 12VDC Power Supply
(1) Relay/Push-to-Exit Wiring Harness
(1) Bell Connector Wire Set
(1) Varistor (blue case, see wiring diagrams)
(4) Screws with Anchors
(2) Hex-Head Screws
(1) Allen Key
(1) Installation and Instruction Manual
PACKAGE CONTENTS
- 4 -
- 5 -
1. Installation
*NOTE: It may be more convenient to perform the initial
configuration of the IP Doorbell with it temporarily connected to
power nearby your home internet router and a computer. This
way testing and operation can be verified before the unit is
mounted permanently.
-Location: Choose a location for your new IP Doorbell, taking into
consideration sightlines, shadows, and excessive back - ground
lighting for the camera. You must also consider proximity to AC
power and the ability to run wiring for additional optional
accessories. Optimal mounting height would be approximately
60”(150cm) up from the surface that the caller is standing on.
Consider drilling a 1¼” diameter or larger hole into the wall
behind the IP Doorbell to allow for the concealment of the Wi-Fi
antenna (if used) within the wall.
-Back Box Mounting: Feed the power supply wiring, wiring
harness(s), and the Wi-Fi Antenna cable or the RJ-45 cable
through the hole from the back side of the back box. Use the
four screws (and anchors, if required) supplied to mount the
back box to the wall in the desired location.
-Set the desired unlock duration time using the switch on the
back of the IP Doorbell, and then connect the wiring harness and
other connections to the back of the IP Doorbell. Gently feed
excess wiring through the hole in the back box into the wall
cavity, and place the IP Doorbell into the back box (top first).
*NOTE: The RJ45 jack is not wired for POE. See appendix A.
-Secure the IP Doorbell into the back box at the bottom
leading edge using the two supplied Hex-Head screws and
Allen key.
- 6 -
Screws
Rain Cover
Back case
- 7 -
____________________________________________
- 8 -
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Accesorios de GBF
