GATEXPERT PY1200AC Manual de usuario

Sliding Gate Opener

User Manual

PY1200AC/PY1800AC/PY2500AC

Website: www.gatexpertstore.com

E-mail: sales@gatexpertstore.com

Instructions for PY1200AC/PY1800AC/PY2500AC

WARNING

Instructions must be read before installation. Please follow these instructions carefully,

incorrect installation could affect gate operation.

When mounting and positioning this product please ensure the power cable is

unplugged.

The motor cover will need to be removed to mount the motor to the mounting plate or

directly to the concrete footing.

Any changes to the settings on this product can only be made by a licensed electrician.

This product is only powered by AC110V/AC220V power supply; DC backup battery or

solar power is not compatible.

Instructions for PY1200AC/PY1800AC/PY2500AC

WARRANTY

1. To repair against this warranty card and invoice during the warranty period.

2. Warranty period: 1 year after the date of invoice.

3. Without unauthorized dismantling, any product broken or damage due to quality problem,

we’ll offer the repair service for free or replace for free.

4. The malfunction and damages caused by incorrect use or man fault is not covered by this

warranty.

E-mail: sales@gatexpertstore.com

Please fill in the order information in the form below.

All personal information you provided will be only used for warranty service and kept

strictly confidential.

Refer to this list when contacting GATEXPERT for technical service or assistance with

your automatic gate opener.

Instructions for PY1200AC/PY1800AC/PY2500AC

CONTENTS

Default Setting Instruction..............................................................................................................1

Safety Instruction.............................................................................................................................2

Parts List...........................................................................................................................................3

Technical Parameters......................................................................................................................5

Installation........................................................................................................................................5

Before You Start..........................................................................................................................5

Tools Required / Example Sliding Gate………............................................................................5

Step 1 - Gate Preparation............................................................................................................6

Step 2 - Checking Manual Release.............................................................................................6

Step 3 - Removing / Installing Motor Cover.................................................................................7

Step 4 – Motor Pad Footing.........................................................................................................8

Step 5 - Fitting Mounting Plate and Motor....................................................................................8

Step 6 - Gear Rack & Motor Alignment......................................................................................10

Step 7 - Limit Switch Stops........................................................................................................11

Step 8 - Powering on........................……..................................................................................15

Step 9 - Testing Travel and Limit Stops.....................................................................................16

A Intelligent Control Board............................................................................................................17

Programming and Wiring...........................................................................................................17

DIP Switch Adjustment..............................................................................................................18

Potentiometer Adjustment.........................................................................................................19

Terminal Instructions.................................................................................................................20

Wiring to the Terminal...............................................................................................................21

Connecting Infrared Photocells.................................................................................................22

Remote Control Operation........................................................................................................23

B Standard Control Board.............................................................................................................24

Programming and Wiring...........................................................................................................24

DIP Switch Adjustment..............................................................................................................25

Terminal Instructions.................................................................................................................26

Wiring to the Terminal...............................................................................................................27

Connecting Infrared Photocells.................................................................................................28

Remote Control Operation........................................................................................................29

Maintenance...................................................................................................................................20

Troubleshooting.............................................................................................................................31

Drawing and Measurements..........................................................................................................32

Instructions for PY1200AC/PY1800AC/PY2500AC

Then the gate will move in

the set direction.

Default Setting Instruction

The gate opener will open the gate to the right-hand side as its default setting. By default, the

opener mounts on the right-hand side. (Figure 1)

Gate in closed position Gate in open position

Figure 1

Before installation: Test the gate opener by plugging it into a power source and pressing the

remote. Press the opening button, the output gear rotates, then press the stop button, the output

gear stops rotating. Finally, press the closing button, the output gear rotates to the opposite

direction. This will give you an understanding of the way in which the opener will move the gate.

Figure 2

Note: Ensure that the gate opener is unplugged before proceeding with installation. Please keep

fingers away from the motor output gear whilst it is turning.

If your gate needs to open from the other direction (to the left, refer to figure 3), your opener needs

to be mounted on the left-hand side as shown, the relative wires need to be swapped over, please

check under “Terminal Instructions” for swapping. (Factory default setting is for right-hand opening:

opener mounted on the right-hand side).

Figure 3

Any works done to the gate opener must be completed whilst the power is off, and the opener is

unplugged.

Press the first/top button

on the remote.

Rotating output gear will

drive the gate frame.

Instructions for PY1200AC/PY1800AC/PY2500AC

Safety Instruction

Warning: Incorrect or improper use of this product can cause damage to persons, animals or

properties.

·Please ensure that the input voltage used matches with the supply voltage of gate opener.

·All modifications to wiring or electrics, and any adjustment or maintenance to input voltage

must be done by a qualified electrician.

·All potential hazards and exposed pinch points of the gate must be eliminated or guarded prior

to installation of this gate opener.

·Never mount any device that operates the gate opener where the user can reach over (under,

around or through) the gate to operate the controls. These must be placed away from any

moving range of the moving gate.

·Ensure power plug is disconnected from the power socket during installation or maintenance.

·Keep remote control and other control devices out of children’s reach, in order to avoid

unintentional activation.

·To ensure safety, before installing the motor, mount a Gate End Catch and a Gate Stop at each

end of the rail to prevent the gate travelling off the track.

·If required, install infrared photocell to detect obstructions and prevent injury to person or

damage to property.

·Instruct all users about the control systems provided and the manual opening operation in case

of emergency.

·Ensure that the power cable is connected to a RCD protected weatherproof power outlet

installed by a qualified electrician.

·Do not install this product in an explosive atmosphere or where there is any danger of flooding.

·This product was exclusively designed and manufactured for the use specified in the present

documentation. Any other use not specified in this documentation could damage the product

and be dangerous.

·Only use original parts for any maintenance or repair operation. Our company declines all

responsibility with respect to the automation safety and correct operation when other supplier’s

components are used.

·Do not modify the automation components, unless explicitly authorized by our company.

·The user must avoid any attempt to carry out any works or repairs on this product, and should

always request the assistance of qualified personnel.

·This product is suitable for use on one sliding gate only.

·Anything which is not expressly provided for in these instructions is not allowed and will void

warranty.

·Dispose of all packing materials (plastic, cardboard, polystyrene etc.) according to current

guidelines. Keep plastic bags and polystyrene out of children’s reach.

·Save these instructions for future use.

Instructions for PY1200AC/PY1800AC/PY2500AC

Parts List

Parts List (standard configuration)

No.

Picture

Name

Quantity

Motor

Manual Release Keys

Remote Controls

Spring Limit Switch Accessories Box/

Magnetic Limit Switch Accessories Box

4-1-1

Spring Limit Switch Stop

1 set

Spring Limit Switch Stop

Mounting Screw M6X10

4-1-2

Magnetic Limit Switch Stop

1 set

Magnets

Magnetic Limit Switch Stop

Mounting Screws M6X16

Nuts M10

Flat Washers φ10

Spring Washers φ10

Instructions for PY1200AC/PY1800AC/PY2500AC

No.

Picture

Name

Quantity

Anchor Bolt M10

5-1

Nuts M10

5-2

Flat Washers φ10

5-3

Spring Washers φ10

Note: Extra flat washers and spring washers are spare parts.

Parts List (optional)

No.

Picture

Name

Quantity

Galvanized Gear Rack

1m/pc

Nylon Gear Rack

1m/pc

Infrared Photocell

Wireless Keypad

Alarm Lamp

Mounting Plate

Hexagon Head Bolt

M10X50

Additional remote controls: Spare/Additional remotes for the automatic gate kit, these will need to

be paired to the motor.

Infrared photocell: Detects pedestrians, vehicles and objects that cross an infrared beam and

prevents the gate from closing.

Wireless keypad: Allows secure access through the gate used with a user set code.

Wired control: Allow users to control the opening and closing of the door through an external

push-button.

Alarm lamp: Alerts people near the gate and users that the gate is in operation.

Instructions for PY1200AC/PY1800AC/PY2500AC

Technical Parameters

Model

PY1200AC

PY1800AC

PY2500AC

Power Supply

110VAC/60Hz; 220VAC/50Hz

Motor Power

450W

600W

800W

Gate Moving Speed

11-13m/min

Maximum Loading Weight

1200KG

1800KG

2500KG

Remote Control Distance

≥30m

Remote Control Mode

Single button mode / Three button mode

Limit Switch

Spring limit switch / Magnetic limit switch

Working Noise

≤60dB

Working Duty

S2, 20min

Recording of up Remote Controls

Standard control board: 25; Intelligent control board: 40

Remote Frequency

433.92 MHz

Working Temperature

-20°C - +70°C

Package Weight

16KG

17KG

17.5KG

Installation

Before You Start

·PY1200AC/PY1800AC/PY2500AC Sliding Gate Automation Kit is suitable for powering

the opening and closing motion of gates up to 1200, 1800, 2500kg in weight, up to a length of

12m.

·Gate motion is achieved by the rotating output gear of the gate opener driving the gear rack

(sold separately) fitted to the moving gate.

·The gate opener requires you to press the remote control once to open, and once again to

close. This is a safety feature to ensure safe operation.

·The opener must be fitted within private property, never externally to a property’s boundary.

Any works done to the gate opener must be completed whilst the power is off and the opener is

unplugged. Any modifications/alterations/works to AC power components must only be completed by

a licensed electrician.

Tools Required

·Tape measure

·Level

·12mm concrete drill and hammer (when uses expansion screws)

·Phillips head screwdriver

·Straight screwdriver

Instructions for PY1200AC/PY1800AC/PY2500AC

Example Sliding Gate

Gate Track and Track Wheels Gate End Catch Gate Guide Rollers Gate Stop

Figure 4

Please ensure that the gate opener power cable is not plugged in at any stage before Step 8.

Step 1 - Gate Preparation

·Ensure that the sliding gate is correctly installed.

·The gate is horizontal and level and the gate can glide back and forth smoothly when moved by

hand before installing the gate opener.

·Wheels and guide rollers should rotate easily and be free from dirt or grime.

·Track should be flat, level and firmly affixed.

·Any misalignment in the gate will affect performance of the automatic gate opener.

The gate should slide smoothly by hand before attempting to install the gate opener.

Figure 5

Step 2 - Checking Manual Release

·Insert the key and open the manual release bar to enable the motor get into manual mode and

check that the motor output gear rotates freely by hand (Figure 6).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Abridor de puerta de GATEXPERT

GATEXPERT

GATEXPERT GT1000DCL Manual de usuario

GATEXPERT

GATEXPERT PY300DCL Manual de usuario

GATEXPERT

GATEXPERT SL500DC Manual de usuario

GATEXPERT

GATEXPERT GT800ACL Manual de usuario

GATEXPERT

GATEXPERT GT1000DC Manual de usuario

GATEXPERT

GATEXPERT GA500DC Manual de usuario

GATEXPERT

GATEXPERT PY300DC Manual de usuario

GATEXPERT

GATEXPERT SL500DCL Manual de usuario

GATEXPERT

GATEXPERT SW400DC Manual de usuario

GATEXPERT

GATEXPERT INDUS-E Series Manual de usuario

GATEXPERT

GATEXPERT GA1000AC Manual de usuario

GATEXPERT

GATEXPERT GK Series Manual de usuario

GATEXPERT

GATEXPERT DKC500DCL Manual de usuario

GATEXPERT

GATEXPERT GA600AC Manual de usuario

GATEXPERT

GATEXPERT DKC500ACL Manual de usuario

GATEXPERT

GATEXPERT SW200DC Manual de usuario

Manuales populares de Abridor de puerta de otras marcas

Elite

Elite CSW200UL Manual de usuario

CAME

CAME FROG-PM4 Manual de usuario

SOMFY

SOMFY FX230 Manual de usuario

Aprimatic

Aprimatic ONDA 500 Manual de usuario

Turnstiles

Turnstiles FSW 900 Manual de usuario

Erreka

Erreka BUL BL33 Instrucciones de funcionamiento

Erreka

Erreka VULCAN S Manual de usuario

Beninca

Beninca R1-2 WBV Manual de usuario

Erreka

Erreka VULCAN D Manual de usuario

Motorline professional

Motorline professional FORT Manual de instrucciones

Beninca

Beninca BOB5024 Manual de usuario

AGA

AGA GATEMASTER 900 HD Manual de usuario

Chamberlain

Chamberlain MotorLift HC280ML Manual de usuario

SOMFY

SOMFY Dexxo RTS Pro Manual de usuario

Cardin

Cardin BL Series Manual de usuario

Westfalia

Westfalia 85 27 06 Manual de usuario

CAME

CAME F500 Manual de usuario

Extel

Extel VERA Manual de usuario