GasDog GD-600 Manual de usuario

www.gasdog.com +86 773-280-9002

[email protected]

GD-600 User Manual

Industrial Fixed Detector

Please read carefully before using

Foreword

You are welcome to use the instrument of this product, and hope that this manual will bring

you convenience when you use the instrument. If you ﬁnd any unclear, wrong or excessively

lengthy place in this manual, please contact the agent or after-sales service department in time.

Before you perform any operation on this instrument, please read this operation manual

carefully, and keep the manual properly so that you can refer to it in time for help in the future.

It is forbidden to disseminate all the contents of this manual without permission;

this manual only provides relevant information.

The company is committed to continuous improvement of product performance, and the

company reserves the right to improve any content in the manual without prior notice.

Please refer to the actual product for the color and style of the product and product.

www.gasdog.com +86 773-280-9002

[email protected]

Foreword

1. Instructions before use

2. Attentions

3. Product Description

4. Product features

5. Attachment conﬁguration list

6. Technical Parameters

7. Instrument installation

8. Remote control instruction

9. Function Description

1. Power On/Oﬀ

1.1 Power On

1.2 Power Oﬀ

2. User Interface

2.1 Detection interface description

2.2 Main menu interface operation

2.3 Calibration

2.3.1 Fresh air/zero calibration

2.3.2 Span Calibration

2.4 Alarm set

2.4.1 High alarm value, low alarm value

2.5 Monitor

2.5.1 Pump On/Oﬀ

2.5.2 Address

2.5.3 Current Setting

2.5.4 Relay

2.5.5 Reset

2.5.6 Language Setting

2.6 Info

2.6.1 Monitor Info

2.6.2 Sensor Info

2.6.3 Firmware Upgrade

10. Common faults and solutions

11. Terms of Service

12. National standards for product development, design

and production

---------------------------------------------------

------------------------------------

---------------------------------------------

--------------------------------------

------------------------------------------

----------------------------

------------------------------------

-----------------------------------

------------------------------

----------------------------------

------------------------------------------

----------------------------------------------

------------------------------------------

------------------------

-------------------------------------------

--------------------------

-----------------------------------

---------------------------------------------

------------------

------------------------------------------------

-----------------------------------------

----------------------------------------------

---------------------------------------

-------------------------------------------------

-----------------------------------

---------------------------------------------------

-------------------------------------------

------------------------------------

---------------------------

------------------------------------------

-----------

Contents

www.gasdog.com +86 773-280-9002

[email protected]

1` Please read carefully before using

Anyone who may use, maintain or repair the instrument should read this operating

manual carefully and only follow the operating manual to achieve the design level. Otherwise

the instrument will not work properly and will cause malfunction and damage to the

instrument.

Warning：

●Before using the instrument, please read the product manual carefully.

●It is strictly forbidden to open the cover when the power is on at the scene.

●It is strictly forbidden to replace the sensor with power on.

●The installation, debugging, setting and other operations must be carried out by

professionals.

● Gas calibration inspection should be carried out regularly, and the sensors that have

exceeded the valid period of use and have faults should be replaced in time.

●It is strictly forbidden to input gas with a gas concentration higher than the measuring

range to impact the sensor.

●Prevent the instrument from falling from a high place or subject to severe shocks.

●It is strictly forbidden to expose the instrument to a high-concentration corrosive gas

environment to work for a long time to prevent damage to the sensor.

●It is strictly forbidden to use it under high temperature and high humidity. If the humidity is

high, it must be equipped with a ﬁlter dehumidiﬁcation device.

●Users are not allowed to repair or replace parts without authorization.

●Man-made damage is not covered by the warranty.

●It is not allowed to change the components or structures that aﬀect the explosion-proof

performance at will, so as not to aﬀect the explosion-proof performance.

www.gasdog.com +86 773-280-9002

[email protected]

2` Attentions

●Electricity safety: Ensure that the instrument shell is properly grounded.

●For safety reasons, this product can only be operated and maintained by professionals,

and this manual must be fully read and understood before operation and maintenance.

●Because the instrument is a bit heavy, at least two people are required when installing

it, pay attention to it, and carry it carefully. Otherwise, it may cause physical injury.

●When carrying the instrument, please wear gloves, otherwise it may cause

injury.

●During the installation process, be careful not to allow wire heads or other debris to enter

the left channel port of the instrument, otherwise it may cause ﬁre, malfunction, or

malfunction.

Calibration warning:

●The gas detection instrument is a safety and life-saving measuring instrument. In order to

ensure the accuracy of measurement, toxic and catalytic combustible gas sensors should

be calibrated at least once every six months, and infrared sensors should be calibrated

once a year.

●The gas detector needs to be carefully tested or calibrated after an alarm

occurs.

www.gasdog.com +86 773-280-9002

[email protected]

3` Product Description

GD700 Industrial Fixed Detector is a ﬁxed pump suction detection instrument used in

complex working environments such as emission gas, oil and gas industry,

pipelines,laboratories, etc. Its built-in brushless pump and suction sampling method make the

detection fast and accurate. It committed to providing users with a reliable, accurate and safe

gas detection program.

4` Product features

2.4-inch high-deﬁnition color screen, wide viewing angle, low power

consumption Built-in micro sampling pump

4-20mA current signal, RS485 digital signal, 1 set of relay signal output

Infrared remote control, convenient and quick

Supports multiple gas units switch

5` Attachment conﬁguration list

Standard accessories:

(1) One gas detector

(2) One infrared remote controller

(3) One water and dust ﬁlter

(4) One manual

(5) Certiﬁcate of conformity, warranty

card (6) Packing box

Optional accessories:

(1) Switching power

supply (2) Alarm light

(3) High temperature

probe (4) Mounting

brackets

(5) Power adapter(24V

DC)(6) Other

www.gasdog.com +86 773-280-9002

[email protected]

6` Technical Parameters

Product size: 286*202*96mm (H x W x D)

Product weight: 3.4kg (3.8kg with alarm light)

Sensor: Electrochemical principle, PID principle, infrared principle, catalytic combustion

principle Gas measurement range: To be speciﬁed

Resolution: To be speciﬁed

Precision: ≤±5%F.S or ≤±10%F.S (depend on sensor type)

Pump ﬂow: 0.6(±0.1)L/Min

Display: 2.4-inch high-deﬁnition color display

Display content: gas molecular formula, concentration, unit, pump status, etc.

Alarm: buzzer, alarm status prompt on the display

Power supply: 12~24V DC

Installation method: wall-mounted

Working hours: 24 hours uninterrupted monitoring

Language: Chinese and English

Expansion: PC software

Humidity: 0~95%RH (non-condensing) (optional external ﬁlter will be needed if the humidity

is too high)

Temperature: -10℃~ +55℃ (optional sampling probe will be needed if the temperature is

too high) Explosion-proof grade: Ex d IIC T6 Gb

www.gasdog.com +86 773-280-9002

[email protected]

7` Instrument installation

Product structure

Wire connection

port

Shell ground

terminal

Screw ﬁxing

hole

Alarm light

(optional)

Gas inlet

Gas chamber

Display

Status indicator

Infrared signal

receiving port

Wire

connection

port

Gas outlet

Screw ﬁxing hole

Water and dust ﬁlter

www.gasdog.com +86 773-280-9002

[email protected]

* As shown in the ﬁgure, the housing grounding

mark " ", the instrument must be

properly grounded to avoid personal safety

accidents or instrument damage caused by

leakage or static electricity.

Installation types

GD700 is a pump suction detector, which can be connected to tube/hose for

detection, and the installation position can be selected ﬂexibly.

Wall-mounted: This installation method is often selected for normal indoor inspection.

According to the nuts and spring washers, and then use 6x30mm nuts and spring washers to

ﬁx the expansion bolts on the wall, as shown.

size of the hole of the detector (above), ﬁx three 6mm expansion bolts on the wall, ﬁx them

with screws,

Note: The installation location must be well

grounded or insulated. Leakage of electricity may

cause the detector to work abnormally.

*Other installation methods such as horizontal pipe,

vertical pipe can be adjusted according to site conditions

286.85

125.00

237.00

180.00

3-φ8.00

96.50

The detector installation avoids the following environmental inﬂuences:

●Environment temperature over device working temperature range.

●Environment humidity over device working humidity range.

●Environment pressure over device working pressure range

●High wind speed.

●Mechanical vibration.

●Strong electromagnetic radiation environment.

●high voltage environment.

●Electricity leakage.

Installation size

The upper and lower spacing of the three ﬁxed holes of the instrument and the size of the

device are as shown in the ﬁgure below.

The left side is the wiring area, and the right side is the alarm.

www.gasdog.com +86 773-280-9002

[email protected]

-10-

Gas outlet

Sampling tube

Sampling side

Sampling tube selection

The sampling tube should be made of materials that have no chemical reaction with the

gas to be detected and no adsorption, and the tube should not exceed 50 meters.

Sampling point selection

The sampling point should be close to the leak source within a distance of 1 m or the

area where workers stay.

To detect toxic gases lighter than the air index, the sampling point should be installed

above the use environment, and the smaller the detection point, the higher.

To detect harmful gases heavier than the air index, the sampling point should be installed

below the operating environment.

Commonly, gas weight is similar to air, their sampling point installation height should be

1.5 meters above the ground .

Filter

www.gasdog.com +86 773-280-9002

[email protected]

Tabla de contenidos

Otros manuales de Detector de gas de GasDog

GasDog

GasDog 41547 Manual de usuario

GasDog

GasDog GD200 Manual de usuario

GasDog

GasDog GD400 Series Manual de usuario

GasDog

GasDog GD300 Series Manual de usuario

Manuales populares de Detector de gas de otras marcas

Macurco

Macurco GD-6 Manual de usuario

Evikon

Evikon E2632 Manual de usuario

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Manual de usuario

MSA

MSA altair 5 Manual de usuario

DOD Technologies

DOD Technologies ChemLogic CL96 Manual de usuario

DEGA

DEGA NS III LCD Series Manual de usuario

RKI Instruments

RKI Instruments 35-3001A-08-01 Manual de usuario

PEMTECH

PEMTECH PT2008 Series Manual de usuario

Coster

Coster RGS 328 Manual de usuario

Sygonix

Sygonix 2483186 Manual de usuario

Perry

Perry 1GA 50917MET/P Manual de usuario

isweek

isweek AS8900 Manual de usuario

Oldham

Oldham OLC 10 Manual de usuario

Wizmart

Wizmart NB983 Manual de usuario

Beacon

Beacon MEGA Manual

RKI

RKI GX-6000 Manual de usuario

Dräger

Dräger PIR 7000 Manual de usuario

GDS

GDS GASMAX EC Manual de usuario