Gammill Vision 2.0 Manual de usuario
Vision™ 2.0
User Manual
Gammill, Inc. |March 2014
Gammill, Inc. October 2017
Vision™ 2.0
Manual
PN 140-0003 Rev02Vision™ 2.0 2
IMPORTANT MACHINE INFORMATION
It is our goal to ensure that Customers have information on the tools and accessories (standard
and optional), that are available for use with Gammill® quilting machines. Some of the tools
and accessories detailed in this Manual may be optional equipment. We recommend that you
consult with your Authorized Gammill Dealer or Sales Representative for the most current list
of standard and optional equipment. Standard equipment, optional equipment, and pricing
are subject to change without notice.
Copyright © 2017Gammill, Inc. AllRights Reserved
PN140-0003 Rev02
October 2017
All rights reserved. No parts of this work may be reproduced in any form or by any
means –graphic, electronic, or mechanical, including photocopying, recording, taping,
or information storage and retrieval systems –without the written permission of the
publisher.
Products that are referred to in this document may be either trademarks and/or
registered trademarks of the respective owners. The publisher and the author make no
claim to these trademarks.
While every precaution has been taken in the preparation of this document, the publisher
and the author assume no responsibility for errors or omissions, or for damages resulting
from the use of information contained in this document or from the use of programs
and source code that may accompany it. In no event shall the publisher and the author
be liable for any loss of profit or any other commercial damage caused or alleged to have
been caused directly or indirectly by this document.
PN 140-0003 Rev02 Vision™ 2.0 3
TABLE OF CONTENTS
Safety Warnings .................................................................................................................................................... 4
Overview ............................................................................................................................................................... 6
Oiling Routine........................................................................................................................................................ 7
Threading Guide .................................................................................................................................................... 9
Bobbin Winding ....................................................................................................................................................11
The Bobbin Case .................................................................................................................................... 12
Powering Up the System.......................................................................................................................................13
The Tablet ........................................................................................................................................................... 14
Blue Tooth Setup ....................................................................................................................................15
The Gammill Vision® 2.0 Application ...................................................................................................................17
Stitching .............................................................................................................................................................. 20
Stitching Modes................................................................................................................................................... 21
Constant Mode....................................................................................................................................... 22
Regulate Mode....................................................................................................................................... 23
Coast Regulate Mode ............................................................................................................................. 24
Baste Mode ............................................................................................................................................ 25
My Stitch™ Preset ............................................................................................................................................... 26
My Stitch™ Buttons ..............................................................................................................................................27
PN 140-0003 Rev02 Vision™ 2.0 4
SAFETY WARNINGS
!CAUTION
:
Moving needle can cause injury.
Keep body parts and loose clothing
away.
~
Rotating parts can cause injury.
Keep hair, body parts, and loose clothing
away.
.
Motor may become hot.
Do not touch motor if machine has been
in operation.
F
Risk for electric shock or burn.
Unplug machine and wait 1 hour before
removing any machine covers.
C
Laser radiation.
Avoid direct exposure to beam.
PN 140-0003 Rev02 Vision™ 2.0 5
Welcome to the Vision® 2.0 by Gammill, the latest in hand-guided quilting technology at your fingertips.
Experience the ease offered by My Stitch™ customizability. Make your quilting system exactly the system you
need.
PN 140-0003 Rev02 Vision™ 2.0 6
OVERVIEW
Needle-End
Hand Wheel
Motor-End
Hand Wheel
Needle
On/Off
Switches
Motor
Light
Intermittent
Tension
Thread Break
Sensor
Rotary
Tension
Tablet
PN 140-0003 Rev02 Vision™ 2.0 7
OILING ROUTINE
12 - 15 drops
every 6-8 hours
*2-4 for the
18-8
1-2 drops every
6-8 hours
On Back: 1-2
drops every 6-8
hours
Extra oiling
location for
18-8; 1-2 drops
every 6-8
hours
1-2 drops every
6-8 hours
PN 140-0003 Rev02 Vision™ 2.0 8
OIL THE HOOK ASSEMBLY EACH TIME YOU CHANGE THE BOBBIN. PLACE THE OIL IN THE
TOP OF THE THREE HOL ES ALONG THE INSIDE OF THE HOOK ASSEMBLY. LET IT RUN DOWN
INTO THE OTHER TWO HOLES. ROTATE THE HAND WHEEL THREE TURNS TO DISTRIBUTE
THE OIL EVENLY.
PN 140-0003 Rev02 Vision™ 2.0 9
THREADING GUIDE
Order
Threading Order
Threading Instructions
1
Thread Lead Off
Take the thread from the cone, up through the hole in the
end of the Thread Lead Off guide and then through the
middle hole from right to left.
2
Small Guide
Take the thread through the back of the small thread
guide, continuing toward the needle end of the machine.
3
Intermittent Tension Thread
Guide
Push a loop of thread through the Intermittent Tension
thread guide.
4
Intermittent Tension
Open the loop and put it around the Intermittent Tension
between the discs.
5
Thread Break Sensor Wheel
Wrap the thread counter clockwise around the Thread
Break Sensor Wheel.
6
3-hole Thread Guide
Pass the thread up through the first hole and back down
through the third hole.
1
1
1
1
1
1
1
1
1
1
1
1
1
2
5
3
4
6
12
7-10
11
13
14
15
Tabla de contenidos
Otros manuales de Máquina de coser de Gammill
