G-Tek Sc5 Series Manual de usuario
1-0
1-1 G-Tek Corporation
Contents
CONTENTS
Contents........................................................................................................................................................ 1-0
1 List of Figures........................................................................................................................................ 1-3
2 List of Tables ......................................................................................................................................... 2-4
3 Introduction.......................................................................................................................................... 3-5
3.1 Manual Layout .............................................................................................................................. 3-5
3.2 Scanner Description...................................................................................................................... 3-6
3.3 Optional Features ......................................................................................................................... 3-6
3.4 Unpacking and Inspection of Scanner .......................................................................................... 3-7
4 Installation ............................................................................................................................................ 4-8
4.1 Electrical Installation................................................................................................................... 4-10
4.1.1 General information ........................................................................................................... 4-10
4.1.2 Wiring diagram for scanner series sc5x9x .......................................................................... 4-12
4.1.3 Wiring diagram for PC interface ......................................................................................... 4-24
5 Operation............................................................................................................................................ 5-26
6 Scanner Configuration ........................................................................................................................ 6-27
6.1 Programming Sequence.............................................................................................................. 6-29
6.2 Turning the Batch ON/OFF:......................................................................................................... 6-30
6.3
Setting Channels to Scan / Skip:
................................................................................... 6-31
6.4 Setting the Batch Name .............................................................................................................. 6-32
6.5 Global configure channels .......................................................................................................... 6-33
6.5.1 Selecting group for alarm high:........................................................................................... 6-34
6.5.2 Selecting various channel parameters:-.............................................................................. 6-35
6.6 Store Interval .............................................................................................................................. 6-36
6.7 Set Date & Time .......................................................................................................................... 6-37
6.8 Dump To Printer.......................................................................................................................... 6-38
6.9 Set Comm. Parameters ............................................................................................................... 6-39
6.10 Password Protected Configuration............................................................................................. 6-40
6.10.1 Header................................................................................................................................. 6-41
6.10.2 Set Page Length................................................................................................................... 6-42
6.10.3 Set Password:...................................................................................................................... 6-43
6.10.4 Relay off Time (Sec) After Alarm is acknowledged ............................................................. 6-44
6.10.5 Print Channel Configuration ............................................................................................... 6-45
6.10.6 Clear memory...................................................................................................................... 6-46
6.10.7 Create Password to Enter Menu:........................................................................................ 6-47
1-2 G-Tek Corporation
Contents
7 Troubleshooting Guide ....................................................................................................................... 7-48
8 Accessories ......................................................................................................................................... 8-49
9 Specifications...................................................................................................................................... 9-50
10 Ordering code................................................................................................................................... 10-53
1-3 G-Tek Corporation
List of Figures
1LIST OF FIGURES
Figure 1- Unpacking and Inspection of Scanner ........................................................................................... 3-7
Figure 2- Environmental Condition and Overall Dimensions........................................................................ 4-8
Figure 3- Panel Mounting ............................................................................................................................. 4-9
Figure 4- Wiring Diagram for Scanner Series SC5x9x ................................................................................. 4-12
Figure 5- Mains Supply Connection ............................................................................................................ 4-13
Figure 6- Sensor Wiring............................................................................................................................... 4-15
Figure 7- Sensor Wiring - RTD (Pt-100) 3-Wire Input.................................................................................. 4-16
Figure 8- Sensor Wiring - RTD (Pt-100) 2-Wire Input.................................................................................. 4-17
Figure 9- Sensor Wiring - Thermocouple Input .......................................................................................... 4-18
Figure 10- Sensor Wiring - mVolt Input ...................................................................................................... 4-19
Figure 11- Sensor Wiring - 4-20 mAmp / 0-20 mAmp Input....................................................................... 4-20
Figure 12- Connecting Scanner with Transmitter and External Power Supply........................................... 4-21
Figure 13- Connecting Scanner with Transmitter and Internal Power Supply ........................................... 4-22
Figure 14- Wiring Details for Relay Connections ........................................................................................ 4-23
Figure 15- Wiring Diagram for PC Interface with Rs-232 Protocol ............................................................. 4-24
Figure 16- Wiring Diagram for PC Interface with Rs-485 Protocol ............................................................. 4-25
Figure 17- Front Panel................................................................................................................................. 5-26
Figure 18- Scanner Configuration ............................................................................................................... 6-29
Figure 19- Turning the Batch On/Off .......................................................................................................... 6-30
Figure 20- Turning Batch On/Off (Rollover Memory Model)...................................................................... 6-30
Figure 21- Setting Channels to Scan / Skip ................................................................................................. 6-31
Figure 22- Setting the Batch Name............................................................................................................. 6-32
Figure 23- Global Configure Channels ........................................................................................................ 6-33
Figure 24- Selecting Group for Alarm High................................................................................................. 6-34
Figure 25- Selecting Various Channel Parameters...................................................................................... 6-35
Figure 26- Setting Interval of Data Storage in Scanner (HR: MN: SC)......................................................... 6-36
Figure 27- Setting Date & Time (DD/MM/YY HR: MN: SC) ......................................................................... 6-37
Figure 28- Dumping the Stored Data to Printer Directly From Scanner..................................................... 6-38
Figure 29- Set the Communication Parameters for PC Connectivity.......................................................... 6-39
Figure 30- Special Configuration Protected Under Password .................................................................... 6-40
Figure 31- Setting Header for Printing........................................................................................................ 6-41
Figure 32- Setting Page Length In Terms Of No of Records........................................................................ 6-42
Figure 33- Set User Password ..................................................................................................................... 6-43
Figure 34- Setting Relay off Time after Alarm Is Acknowledged ................................................................ 6-44
Figure 35- Print Configuration Yes/No........................................................................................................ 6-45
Figure 36- Clear Memory ............................................................................................................................ 6-46
Figure 37- Create Password to Enter Menu................................................................................................ 6-47
Figure 38- Accessories ................................................................................................................................ 8-49
2-4 G-Tek Corporation
List of Tables
2LIST OF TABLES
Table 1 - Manual Layout ............................................................................................................................... 3-5
Table 2 - Troubleshooting Guide ................................................................................................................ 7-48
Table 3 - Specifications ............................................................................................................................... 9-50
Table 4 - Data Storage................................................................................................................................. 9-51
Table 5 - Sensor Type, Range, Accuracy, Temp Specification..................................................................... 9-52
Table 7 - Ordering Code............................................................................................................................ 10-53
3-5 G-Tek Corporation
Introduction
3INTRODUCTION
This manual is written to help the user to familiarize with the installation and operation of the multichannel
scanner of series SC5x9x.The Sc5x9x series of multichannel scanners are designed for reliable and
convenient recording of process parameters in production, Research and Quality control applications. This
Scanners are capable of monitoring up to 24 channels at the scan rate of 5chnl/5sec or 12chnl/5sec
depending on the type of the scanner ordered.
3.1 MANUAL LAYOUT
This manual is divided into a number of sections for quick and easy reference.
Table 1 - Manual Layout
Section 1 Introduction
This gives outline of the manual, brief description about the
scanner, Optional features available and how to unpack it.
Section 2 Installation
This section gives the details about mechanical and electrical
installation.
Section 3 Operation
This section gives the details of the front panel display and key-
board.
Section 4 Recorder Configuration
This section gives the details about various parameters that
user can set using key-board for proper monitoring
requirement.
Section 5 Calibration
This section describes the mechanical calibration procedure
for the scanner.
Section 6 Troubleshooting guide
This section describes about the most frequently asked
questions and their solutions.
Section 7 Parameter Setting
This section describes the method of setting various
parameters/programming sequence.
Section 8 Accessories
This section describes the standard accessories for the scanner
along with their part nos.
Section 9 Specifications
It describe the detailed specification of the scanners.
Section 10 Ordering Code
It describe the details of order code and comparing it with the
code on the scanner, user can find out the installed options.
*Features and capabilities may vary depending upon the product purchased.
3-6 G-Tek Corporation
Introduction
3.2 SCANNER DESCRIPTION
The multichannel scanner SC5x9x are available in multiple of eight channels with a wide range of inputs.
The ZOX4 line LCD display allows user to continuously monitor the current readings with good readability
and settings of configurations. This multichannel scanner also has 4 multipurpose keys which enables user
to easy programming/configure the unit. For the convenience of the user and to make it cost effective,
universal inputs are made as an optional feature.
3.3 OPTIONAL FEATURES
Following optional features are available for this series of scanners.
Universal Input
Relay Output
Battery Backup
Transmitter Power Supply
RS232-C/ RS485/USB/MODBUS connectivity
PC Software: Aq Wire 1.0 or Aq Wire 4.0
Printer Interface
NumberofChannels:8, 16 or 24
Scanning Speed : 5chnls/5sec or 12chnls/5sec
It is possible that the scanner you received may or may not be fitted with the optional features.
Please refer to the product code to know about installed options in your Scanner.
3-7 G-Tek Corporation
Introduction
3.4 UNPACKING AND INSPECTION OF SCANNER
G-Tek Scanner are dispatched in a recyclable, environment friendly package specially designed to give
adequate protection during transit. If the outer box show sign of damage, it should be opened immediately
and the scanner be examined. If there is evidence of damage, the instrument should not be operated and
the local representative contacted for instructions. Ensure that all accessories and documentation is
removed from the box. If the scanner is for immediate use, you can start installing it now as per following
instructions. Please preserve the original packing along with all internal packing for future transport
requirements.
Front View:
Back View:
Figure 1- Unpacking and Inspection of Scanner
PC Memory
4-8 G-Tek Corporation
Installation
4INSTALLATION
Figure 2- Environmental Condition and Overall Dimensions
4-9 G-Tek Corporation
Installation
Figure 3- Panel Mounting
Tabla de contenidos
