G-Force S5 Manual de usuario
S5 Electric Scooter
User’s Manual
WARNING
Please read the user manual carefully before using your new scooter.
This version is for private use only and should not be distributed.
Contents
1 Package Contents---------------------------------------------------------------------- 02
2 Diagram -------------------------------------------------------------------------------- 03
3 Assembly ------------------------------------------------------------------------------- 06
4 Charge ---------------------------------------------------------------------------------- 07
5 How To Ride ---------------------------------------------------------------------------- 07
6 Safety Instructions ---------------------------------------------------------------------- 09
7 Folding and Carrying ------------------------------------------------------------------- 14
8 Daily Care and Maintenance------------------------------------------------------------ 14
9 Specifications -------------------------------------------------------------------------- 16
10 Limited Guarantee Period -------------------------------------------------------------- 17
Welcome to use
Thank you for purchasing S5 Electric Scooter (Abbreviated as scooter) !
This scooter is an easy-to-carry short-distance transportation product. It is a sports and
recreational vehicle with style.
47—78in
16—60 years
All pictures in this user manual are for reference only, please refer to the actual product.
When riding a scooter, please
wear helmets, knee pads, wrist
pads and other protect ive gear
to reduce the risk of injury
01
1. Package Contents
Assembled Electric Scooter
User Manual
Accessories
Accessories Box : Screw × 5 Tool Kits × 1 Inner Tube × 1 Valve Core Wrench × 1
Carefully check package contents, if anything is missing or damaged,please contact the customer service in time.
Battery Charger
Accessories Box
02
S5 Electric Scooter
User Manual
2. Diagram
Electronic Throttle
Control Panel
Hook
Stem
Charge Prot
Taillight
Rear Fender
Buckle
Hub Motor
Kickstand
Brake Lever
Headlight
Folding Latch
Front Wheel
Bell
03
Speed & Error
Odograph
Battery Level
Power Button
Speed Level
Light
Mode Button
Push Assistance
km/h
MPH
ln
njmf
Trip
ODO
04
Battery Level Display
The power level is indicated by five segments on the control panel.Each segment represents about 20 % of
the power.
Power Button
Hold “ ”button for 3s to turn on or off the scooter. When the scooter is on, press “ ”button to turn on or
off the headlight and taillight.(If your scooter is not used for more than 10 minutes, the power will be
automatically turned off.)
Mode Button
Keep holding“ M ”button to enter push assistance mode.
Press“ M ”button to switch riding mode.
Mode Display
Mode “1”: ECO mode. (Lower power)
Mode “2”: Normal mode. (Normal power)
Mode “3”: Sport mode. (Higher power)
Mode “Cruise”: When the driving speed remains unchanged for 7s, the cruise control will be automatically
activated, and then the “warning light” is flashing on the control panel. The scooter will maintain that speed
even if the throttle is not pressed. Cruise control can be deactivated by pulling the brakes or pressing the
throttle again.
Warning Light
[1]
[1]： / Different control panels may display
different indicator ICONS, please refer to the
actual display
05
Error Code
01
02
03
04
05
06
Definition
Controller failure
Communication failure
Hall element failure
Throttle failure
Brake failure
Motor failure
Odograph Display
The Odograph position is displayed as ODO （Total mileage）3 seconds after the instrument is started, and
then it is switched to trip 3 seconds later.
Error Code Display
If the speed area of the display shows or flashes «OX», it indicates a malfunction of the scooter. Error code
meanings can be found below.
SystemSettings
In the power-on state, when the display shows the speed of 0
1.Hold “ ”button and“ M ”button at the same for 3s to enter the setting interface.
2.Press“ M ”button to select P1-Speed Limit Setting or P2-Unit Setting.
3.Press“ ”button to enter the parameter modification state.
4.Press“ M ”button for parameter selection.
5.Hold “ ”button for 3s to save the parameter and return to the first setting interface.
6.Hold “ ”button for 3s to exit the setting interface.
P1: Speed Limit Setting
By modifying this value, you can set the maximum riding speed of your scooter. The selectable range of the
maximum speed setting value is 25km/h-32km/h(15MPH-20MPH).
P2: Speed Unit Setting
By modifying this value, you can set the unit of your scooter. 00 represents the metric system, and 01
represents the imperial system.
3. Assembly
1. Put the kickstand down to support the
scooter, then unfold the handlebar stem
and fix it by folding mechanism.
2. Firmly connect the wires inside the
handle and the stem. Slide the handle
onto the stem. Be aware of the correct
orientation.
3. Install four screws (two on each side)
with the included hex wrench.
4. Ensure that your scooter can be powered
on and off.
06
4. Charge
Charging condition description:
The scooter is fully charged when the LED on the charger changes from red (charging) to green(trickle charge).
Charging Port
Open the charge
port cover.
Insert the
charge plug.
Close the charge
port cover when
charging finished.
5. How To Ride
Warning: Wear a helmet,
elbow pads and knee pads.
Please read the instruction
carefully before using. Do not
touch the power system. Refer
to the instruction for more
information
1. Long press to power on the
scooter.
07
2. Step on the deck with one foot, and slowly
kicks off the other on the ground.
3. When the scooter starts to coast, put both feet on
the deck and press the accelerator (the accelerator
initiates once the coasting speed exceeds 2.4 MPH).
When the scooter is at a full stop, the accelerator automatically turns off.
To restart the scooter, it is necessary to repeat step 2.
4. Release the accelerator and the kinetic energy
recovery system (KERS) initiates automatically
to brake slowly; And squeeze the brake lever
for a sudden brake
5. Tilt your body to the steering direction as you turn, and
slowl y turn the handlebar
08
Tabla de contenidos
