Furuno NavNet TZtouch3 TZT9F Manual

Icon (home/displays), power switch operations

Operational Overview

How to select a display

MULTI FUNCTION DISPLAY

TZT9F/TZT12F/TZT16F/TZT19F

Operator’s Guide

Model

This guide provides the basic operating procedures for this equipment. For detailed information, see the Operator’s

Manual on the WEB site. You can get the latest version of the manual by accessing the quick response code at the

bottom of this page. Connection of sensors required.

iPhone, iPod and iPad are trademarks of Apple Inc. Android is a trademark of Google Inc. All brand and product

names are trademarks, registered trademarks or service marks of their respective holders.

The screenshots used in this guide were mainly taken from the TZT19F.

Displays the

home screen.

FURUNO iconFURUNO icon

Home screenHome screenHome screenHome screenHome screen

Long tap a display icon to edit, delete, resize, or

change its location.

Display icon long tapped

Edit Delete

Size

(large or

small)

location

Tap

How to edit a display iconHow to edit a display icon

www.furuno.com

Tap

TZT9F/

TZT12F

䠄Right side of the Panel䠅

TZT9F/

TZT12F

䠄Right side of the Panel䠅

TZT16F/TZT19FTZT16F/TZT19F

Swipe downward from

top of display.

Quick pageQuick pageQuick pageQuick pageQuick page

- Tap a display icon on the home screen (see illustration above).

- Tap a display icon on the Quick page.

- Tap a display icon on the home screen (see illustration above).

- Tap a display icon on the Quick page.

Operator’s Manual

Download Link

Power switchPower switch

- Turns on power.

- Shows [Quick Access] window.

Power offPower offPower offPower offPower off

Device: Powers off

this unit.

Network: Powers off

all NavNet TZtouch

series units in network.

Day

Brilliance, HueBrilliance, HueBrilliance, Hue

Hue:

Brilliance:

DRS6A_X-CLASS BBDS1

Tap

Display icons

(max. 16 on home screen)

“eGuide” provides

an abbreviated

operator’s guide.

Touchscreen operations

Menu operation

Pop-up menu

Tap screen (applicable

point, object, etc.).

Tap the required function.

(”>” indicates additional options.)

Layers menu

Tap the required function.

(To switch between menus, swipe,

or tap applicable tab.)

Slide-out menu

Tap the required function.

Swipe leftward from the right edge. Icon color and function state

Yellow: ON, White: OFF

Tap the FURUNO icon.

Tap [Settings].

Drag to find required

menu, then tap item. Tap the required menu item.

Settings menu

Swipe upward from

the bottom edge.

Layers menuLayers menuLayers menu

Layers menuLayers menu

Tap

- Select an item on a menu.

- Tap the display or an object to

show the corresponding pop-up

menu.

- Move the chart.

- Scroll the menu.

- Show Slide-out menu, Layers menu.

Drag, swipe

Zoom in Zoom out

Pinch

- Zoom in, zoom out the chart

plotter and weather displays.

- Change the range on the radar

and fish finder displays.

Zoom

out

Zoom

out

Zoom

out

Zoom

out

Zoom

out

Do the function assigned to [Two

Finger (Long) Tap Function] in the

[Settings] - [General] menu.

Two finger (long) tap

Two finger drag

Change the viewpoint

position on the 3D display.

Tap

Pop-up menuPop-up menuPop-up menu

Pop-up menuPop-up menu

Tap

Slide-out menuSlide-out menuSlide-out menu

Slide-out menuSlide-out menu

Tap

Scale slider,

Range slider

Tab

Chart Plotter

Event icon

Scale slider

([+], [-] icons)

Scale bar

COG vector

(dashed line)

COG vector

(dashed line)

Data

area

Data

area

*: Arrival or departure position,

selectable on Layers menu.

Own ship iconOwn ship icon

TrackTrack

Heading

line

Heading

line

PointPoint

Undo,

Redo

icons

Center

Vessel

Navigation bar

Depth Alarm

Inactive route

(sleeping)*

192.0

48.4° 1d08h 1d08h

Status barStatus bar

Orientation Mode

Switch between

NU and HU.

Switch between 2D

and 3D. (Drag upward

with two fingers also.)

2D: 3D

3D: 3D

11Tap the data box to

remove or change.

Tap the data box to

remove or change.

22Remove a data box: Tap [Remove].

Change data: Tap data to display.

Remove a data box: Tap [Remove].

Change data: Tap data to display.

Swipe from the left edge of the screen rightward to show navigation data in the data area at the left edge of the screen.

To hide the data area, swipe the data area leftward or tap the [NavData] indication (yellow) in the Slide-out menu.

Data Area (Data Box)Data Area (Data Box)

To add a data box;To add a data box;

Data box settings

Long tap the data box to show

[Edit NavData] display.

Long tap the data box to show

[Edit NavData] display.

11Tap empty space on

the data area or

[+Add NavData].

Tap empty space on

the data area or

[+Add NavData].

2Tap a data

to add.

a dataTa

a data

o add.

to add.

Tap

Long

tap

Tap

Tap [Close] to finish.Tap [Close] to finish.

To remove a data box, or

change the displayed data:

To remove a data box, or

change the displayed data:

Tap

to change the data

display method,

among Graphic

(analog), Numeric

(digital) and Graph.

Tap [Change Type]

to change the data

display method,

among Graphic

(analog), Numeric

(digital) and Graph.

Tap

Grip icon

Drag the grip

icon to move

the data box.

Grip icon

Drag the grip

icon to move

the data box.

Tap

Inactive route

(expanded)

Inactive route

(expanded)

Points/boundaries

Points can be entered on the chart plotter display (radar, fish finder and weather displays also) to mark important

locations such as a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the Points

list. Also, boundaries can be set at the position desired (net position, area to avoid, etc.).

Tap where to enter a point.

The point is entered

on the screen.

Tap a point or the location

to set as destination.

On-screen point Selected location

On-screen pointOn-screen point

Points listPoints list

How to enter a point

Yellow line:

Shortest course from own

ship to the destination.

Purple line (with arrow):

Indicates course to go to

the destination.

How to set a point as destination

Tap [Lists] on the

home screen.

Destination point

Lists

If a point was tapped.

NoticeNoticeNoticeNoticeNotice

Note: [Find on Chart] puts the

selected point at the screen center.

Sort the list by date, name, icon, color, range.

How to set a boundary

Tap the position where to

set a boundary. Tap the shape to use for

the boundary.

[Area]/[Line]: Tap neces-

sary points to complete

the boundary, referring to

"Route" on the next page.

[Circle]: Drag icons to

adjust the size and

position, and then tap

[End Boundary].

Tap Tap

Tap

Tap Tap

Tap

Tap the point to set as the destination.Tap the point to set as the destination.

㻙

Tap

Find on Chart

Tap

Routes

A route is comprised of a series of waypoints leading to a destination. Routes are saved to the routes list.

On-screen routeOn-screen route

Routes listRoutes list

How to follow a route

Tap a leg of the route.

Home screen

Sort list by date, name, color, length, or range.

Tap the route to use.

Lists

Tap Tap

Tap

Tap the first point for

the route.

At the last point

Tap the next point for the route.

Repeat to enter all points for the route.

How to create a new route

Enter a name for the route, then tap [ ].

(Top right corner)

1st point

(route start point)

1st point

(route start point)

Last

point

Last

point

Tap

Radar

How to switch between standby and TX

Tap to switch between

automatic and manual.

Drag the

slider/tap the

slider bar to

adjust.

How to adjust the gain / sea clutter / rain clutter

: Standby

: TX

“A” means automatic adjustment

“M” means manual adjustment

(At bottom of data area)

(Top right corner)

Radar Control

RADAR

ATA

ATA 1

Radar Control

Gain

Auto adjustment mode

Switch

Manual adjustment mode

(lower left side of

the screen)

Tap

Data

area

Own ship position

Heading line

Guard zone

Fixed range rings

Range

North mark

[+]: Increase range

[-]: Decrease range

Move

own ship

position to center

TargetTarget

Tap a target to show its range

and bearing from own ship.

How to measure the range, bearing from own ship to a target

How to set a guard zoneHow to set a guard zone

A guard zone alerts you (with aural and visual alarms) when a radar target enters the area you

specify.

The guard zone appears in dashed

lines.

An icon appears at each corner

of the guard zone.

The dashed lines change to

solid lines, indicating the

guard zone is active.

Drag the icons to set guard zone.

Open the Layers

menu, tap the

[Overlays] tab.

Tap dashed line on guard zone.

Guard zoneGuard zone

Tap the guard zone again.

(Top right corner)

Goto

Tap

Auto Acquire

ARPA Operation

ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision. ARPA not only tracks other ships

but also provides their navigation data. Targets can be acquired manually, automatically, or both automatically and manually.

How to show, hide ARPA symbols

How to manually acquire a target

Tap the target to acquire.

TargetTarget

ARPA symbols

How to automatically acquire a target

At acquisition Lost target

How to display target data

30 seconds

after acquisition

ARPA symbols ON

ARPA symbols OFF

Acquire

Set a guard zone, then tap the

guard zone.

Open the Layers menu,

tap the [Overlays] tab.

ARP

OFF

Tap an ARPA target to show its data.

ARPA symbolARPA symbol

The dashed lines change to solid lines,

indicating the guard zone is active.

Tap Tap

Tap

CPA/TCPA alarm

CPA Line

The CPA/TCPA alarm releases an aural alarm and a visual alarm (message in Status bar) when both the CPA

and TCPA of a tracked target are equal to or lower than the CPA/TCPA alarm setting.

How to set the CPA/TCPA alarm

CPA: Closest point of approach

TCPA: Time to closest point of approach

How to acknowledge the CPA/TCPA alarm

How to enable the CPA Line feature

How to show the CPA Line

Tap the alarm message (top of screen) to acknowledge the alarm and stop the aural alarm.

The CPA Line feature gives you a visual line that depicts the closest point of approach to a selected ARPA target. To

use this feature, own ship position and heading data are required.

CPA/TCPA Alarm

Set the alarm value, then tap [ ].

㻻㻺

CPA Graphic Display

Tap

CPA Line

Own ship

ARPA target 5

Tap

Home screen

Tap

Home screen

Tap

Tap an ARPA target (condition: target's CPA/TCPA must be a positive value) on the radar or chart plotter.

1010

AIS symbols ON

AIS symbols OFF

How to show or hide AIS target symbolsHow to show or hide AIS target symbols

AIS target symbols

Proximity AIS target alarmProximity AIS target alarm

The proximity AIS target alarm releases aural and visual alarms when the distance between own ship and an AIS target is near

the alarm value.

How to show AIS target dataHow to show AIS target data

AIS (Automatic Identification System)

Set the alarm value, then tap [ ].

OFF

Color: Blue

SOG and

COG vector

Color: Red

Color

- AIS target: Blue

- Cross: Red

Color

- AIS target: Green

- Cross: Red

Class A AIS

Activated

target

Dangerous

target

Lost

target

BFT* AIS

Class B AIS

Color: Green

SOG and

COG vector

SOG and

COG vector

Color: Blue (filled)

Color

- AIS target: Blue (filled)

- Cross: Red

*: Blue Force Tracking

Tap

Home screen

Tap

AIS symbolAIS symbol

650 NM

648 NM

Open the Layers menu,

tap the [Overlays] tab.

648 NM

650 NM

Tap AIS symbol.

㻮㼛㼘㼕㼢㼕㼍㻮㼛㼘㼕㼢㼕㼍

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Furuno

Furuno

Furuno MU-150HD Manual de usuario

Furuno

Furuno FMD-3200 Manual de usuario

Furuno

Furuno MU-231 Manual de usuario

Furuno

Furuno MFD8 Manual de instrucciones

Furuno

Furuno TZTL12F Manual

Furuno

Furuno Mu 120c Manual de usuario

Furuno

Furuno NAVNET 3D MFDBB Manual de usuario

Furuno

Furuno FI-70 Manual de instrucciones

Furuno

Furuno MU-170C Manual

Furuno

Furuno SFD-1010 Manual de usuario

Furuno

Furuno RD-33 Manual de usuario

Furuno

Furuno TZTL12F Manual de usuario

Furuno

Furuno NAVNET 3D MFDBB Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Furuno

Furuno MFD8 Manual de instrucciones

Furuno

Furuno PM30 Manual de usuario

Furuno

Furuno FMD3100 Manual de usuario

Furuno

Furuno TZT9F Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Furuno

Furuno FMD-3300 Manual

Furuno

Furuno ECDIS FEA-2100 Manual de usuario

Furuno

Furuno TZTL12F Manual

Furuno

Furuno FMD-3200-BB Manual

Furuno

Furuno NAVNET TZTOUCH2 TZTL15F Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación

LG M1950D-PZ Manual de usuario