Furuno GP-7000F Manual de usuario
Installation Manual
COLOR GPS/PLOTTER/SOUNDER
GP-7000F
SAFETY INSTRUCTIONS.......................................................................................................i
SYSTEM CONFIGURATION..................................................................................................ii
EQUIPMENT LISTS ..............................................................................................................iii
1. INSTALLATION.................................................................................................................1
1.1 Display Unit........................................................................................................................1
1.2 Antenna Unit ......................................................................................................................4
1.3 Transducer.........................................................................................................................5
1.4 Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB ...............................18
2. WIRING ...........................................................................................................................19
3. ADJUSTMENTS..............................................................................................................26
3.1 Choosing Position Data Source .......................................................................................26
3.2 Choosing Port I/O Format................................................................................................28
3.3 Echo Sounder Settings....................................................................................................30
3.4 Choosing Data Source(s) ................................................................................................32
3.5 Calibrating NMEA Depth, Speed and Water Temperature Data ......................................33
3.6 C-FORECAST Setup .......................................................................................................34
PACKING LIST...................................................................................................................A-1
OUTLINE DRAWINGS .......................................................................................................D-1
INTERCONNECTION DIAGRAM....................................................................................... S-1
Your Local Agent/DealerYour Local Agent/Dealer
9-52 Ashihara-cho,9-52 Ashihara-cho,
Nishinomi
y
a 662-8580, JAPANNishinomi
y
a 662-8580, JAPAN
Tele
p
hone :Tele
p
hone : 0798-65-21110798-65-2111
FaxFax 0798-65-42000798-65-4200
::
F
IRST EDITION :
F
IRST EDITION :AUGAUG.. 20042004
Printed in JapanPrinted in Japan
A
ll ri
g
hts reserved.
A
ll ri
g
hts reserved.
Pub. No.Pub. No. IME-44291-AIME-44291-A
*
00014914000
*
*
00014914000
*
*
00014914000
*
*
00014914000
*
(( DAMIDAMI )) GP-7000FGP-7000F * 0 0 0 1 4 9 1 4 0 0 0 ** 0 0 0 1 4 9 1 4 0 0 0 *
*
IME
44291
A
00
*
*
IME
44291
A
00
*
*
IME
44291
A
00
*
*
IME
44291
A
00
*
* I M E 4 4 2 9 1 A 0 0 ** I M E 4 4 2 9 1 A 0 0 *
i
SAFETY INSTRUCTIONS
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Use the power cable supplied with the
installation materials.
Use of other power cables may cause fire
or damage the equipment.
Use the proper fuse.
Use of the wrong fuse may damage the
equipment.
Observe the following precautions when
handling the transducer cable:
- Keep away from oils.
- Choose a working area where the
cable will not be damaged during
installation.
- Do not paint the cable.
The sheath of the cable is made of
chloroprene (or polyvinyl chloride).
Those materials easily deteriorate in
the presence of organic solvents
(toulene, etc.) found in paints. For
that reason keep the cable away from
ship's paint house.
Display
unit
Standard Steering
compass compass
0.70 m 0.45 m
ii
SYSTEM CONFIGURATION
TRANSDUCER
Speed/Water
Temp Sensor
(option)
Distributor
MB-1000*
* Required when using
1 kW transducer.
Power Source
12-24 VDC
: Option
: Standard
: User Supply
ANTENNA UNIT GPA-017
DISPLAY UNIT
GP-7000F
How to remove the hard cover
Place your thumbs at the center
of the cover, and then lift the cover
while pressing it with your thumbs.
NMEA1 and NMEA2 ports:
Radar, autopilot, video sounder,
temperature indicator, etc.
PC/NMEA IN port:
PC, NMEA device, buzzer
iii
EQUIPMENT LISTS
Standard supply
Name Type Code No. Qty Remarks
Display Unit GP-7000F — 1
Antenna Unit
GPA-017
— 1
System also available
without antenna (for boats
which already have an
appropriate antenna)
Installation
Materials*
CP14-06400 000-041-183 1 Signal cable and power
cable
Spare Parts* SP14-03201 004-371-980 1
520-5PSD 000-015-204
525-5PWD 000-146-966
Transducer
520-5MSD 000-015-212
525ST-MSD 000-015-263Triducer
525ST-PWD 000-015-261
Choose
one
Also available without
transducer (for boats with
transducer already installed)
*: See list at back of this manual.
Optional equipment
Name Type Code No. Qty
GPS Antenna GPA-017S 000-040-541
CP20-01700 004-372-110 30 m, antenna cable extensionAntenna Cable Set
CP20-01710 004-372-120 50 m, antenna cable extension
Right Angle
Antenna Base No.13-QA330 000-803-239
L-angle Antenna
Base No.13-QA310 000-803-240
Antenna Base for
Rail Mounting No.13-RC5160 000-806-114
For mounting antenna unit
Mast Mounting Kit CP20-01111 004-365-780 For mounting antenna unit on a mast
MJ-A6SPF0012-050 000-134-424 6P – 6P, 5 m
MJ-A6SPF0012-100 000-133-817 6P – 6P, 10 m
MJ-A6SPF0003-050 000-117-603 6P, 5 m
Cable Assy.
MJ-A7SPF0007-050 000-144-418 7P, 5 m
50B-6 000-015-042
50B-6G 000-015-016
200B-5S 000-015-029
200B-5 000-015-027
Transducer
50/200-1T 000-015-170
Inner Hull Kit S 22S0191-2 000-802-598
Distributor MB-1000 000-040-809 For 1 kW transducer
02S4089 000-133-622 For Distributor MB-1000Cable Assy.
02S4147-0 000-141-082 For sensor
Sensor ST-02PSB 000-137-987
Sensor ST-02MSB 000-137-986
Speed/water temperature sensor
This page is intentionally left blank.
1
1. INSTALLATION
1.1 Display Unit
The display unit may be mounted on a desktop, overhead or flush mounted in a console.
Mounting considerations
Choose a mounting location for the display unit considering the following points:
• Choose a location where the controls can be easily operated.
• Leave sufficient space around the unit to facilitate checking and maintenance. See the
outline drawing at the back of this manual for recommended maintenance space.
• Locate the unit out of direct sunlight because of heat that can build up inside the cabinet.
• The operating temperature range is -15°C to 55°C (5°F to 131°F).
• Locate the unit well away from exhaust gases and other active gases.
• The location should be well ventilated.
• Choose a location where shock and vibration are minimal.
• Be sure the mounting location is strong enough to support the weight of the unit,
particularly in overhead mounting. If necessary reinforce the mounting location.
• A magnetic compass will be affected if the display unit is placed too close to the compass.
Observe the following compass safe distances to prevent deviation to the compass.
Standard compass, 0.70 m, Steering compass, 0.45 m.
2
Mounting
Desktop, overhead mounting
1. Fix the hanger to the mounting location with four self-tapping screws (5x20). See the
outline drawing on page D-1 for complete mounting dimensions.
2. Loosely screw the knob bolts into the display unit.
3. Set the display unit to the hanger and tighten the knob bolts.
4. Attach the hard cover to the display unit to protect the LCD.
FIXING HOLE
Unit: mm
Display unit, mounting dimensions for desktop or overhead mounting
3
Flush mounting
If the thickness of the console is 11-14 mm, use the washer
head screws (M4x20) supplied with the installation
materials. If it is thicker than those dimensions, the length of
the screws should be the thickness of the console plus
7.3 mm ±1.5 mm. The length of the threaded portion to be
inserted to the display unit should not exceed 7 mm (B≤7).
1. Prepare a cutout in the mounting location using the template provided.
2. Fix the display unit with six washer head screws (M4x20) provided.
52 80 150
Service
Clearance
Unit: mm
Mounting dimensions for flush mounting
BA
A: Thickness of console
4
1.2 Antenna Unit
Refer to the antenna unit outline drawing at the back of this manual for mounting
instructions.
When selecting a mounting location consider the following points:
• Select a location out of the radar and Inmarsat beams. Those beams will obstruct or
prevent reception of the GPS satellite signal.
• There should be no interfering object within the line-of-sight to the satellites. Objects
within line-of-sight to a satellite, for example, a mast, may block reception or prolong
acquisition time.
• Locate the antenna well away from the antenna of a VHF radiotelephone to prevent
interference.
• Mount the antenna unit as high as possible. Mounting it this way keeps it free of
interfering objects and water spray, which can interrupt reception of GPS satellite signal if
the water freezes.
Note: If the antenna cable is to be passed through a hole in a bulkhead which is too small
to pass the connector, disassemble the connector with radio pincers and a monkey
wrench. After passing the cable through the hole assemble the connector as below.
Pin (Solder.)
Clamping Nut
Housing
Gasket
Washer
Shield
How to assemble the antenna connector
Otros manuales para GP-7000F
4
Tabla de contenidos
Otros manuales de Sistema GPS marino de Furuno
Furuno
Furuno GP-1850 Series Manual de usuario
Furuno
Furuno GP-1650WDF Manual de usuario
Furuno
Furuno GP-1610CF Manual de usuario
Furuno
Furuno GD-1700C Manual de usuario
Furuno
Furuno GP-1850DF Manual
Furuno
Furuno FM-3000 Manual de instrucciones
Furuno
Furuno 1834C Manual
Furuno
Furuno GP-50 Manual de usuario
Furuno
Furuno GP-7000F Manual de usuario
Furuno
Furuno GP-32 Manual de usuario
Furuno
Furuno GP-1850W Manual de usuario
Furuno
Furuno GP-1650W Manual de usuario
Furuno
Furuno GP-1850W Manual de usuario
Furuno
Furuno GP-1250 Manual de usuario
Furuno
Furuno Navpilot 500 Manual
Furuno
Furuno GP1650 Series Instrucciones de instalación y funcionamiento
Furuno
Furuno GP-1670F Manual de usuario
Furuno
Furuno GP-1850F Manual de usuario
Furuno
Furuno GP-3500F-D Manual de usuario
Furuno
Furuno Precision PG-500 Manual de usuario
