Fujitsu PRIMERGY TX300 S3 Manual del propietario

PRIMERGY

PRIMERGY TX300 S3

Server

Service Supplement

Susanne Däschlein

Fujitsu Siemens Computers GmbH

München

81730 München

e-mail: email: [email protected]

Tel.: (089) 61001155

Fax: (++49) 700 / 372 00000

TX300 S3

Sprachen: En

Edition August 2006

Comments Suggestions Corrections

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

TX300 S3 Service Supplement

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Overview of the documentation . . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . . 8

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 17

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1 Floorstand model . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.1.2 Removing the front cover . . . . . . . . . . . . . . . . . . . . 17

4.1.2 Rack model . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.1.2.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 18

4.1.2.2 Removing the rack front cover . . . . . . . . . . . . . . . . . . 18

4.2 Replacing the operating panel . . . . . . . . . . . . . . . . . 19

4.3 Replacing the processor fan holder . . . . . . . . . . . . . . . 20

4.4 Replacing the Power backplane . . . . . . . . . . . . . . . . . 20

4.5 Replacing the SAS/SATA backplane . . . . . . . . . . . . . . 23

4.6 Replacing the intrusion switches . . . . . . . . . . . . . . . . 28

4.7 Replacing the IDTEMP combo . . . . . . . . . . . . . . . . . 32

4.8 Replacing the system board . . . . . . . . . . . . . . . . . . . 34

5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.1.1 Operating panel board . . . . . . . . . . . . . . . . . . . . . 37

5.1.2 SAS/SATA backplane . . . . . . . . . . . . . . . . . . . . . . 38

5.1.3 Power backplane . . . . . . . . . . . . . . . . . . . . . . . . 39

5.1.4 Processor fan backplane . . . . . . . . . . . . . . . . . . . . 40

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

TX300 S3 Service Supplement 5

1Introduction

The PRIMERGY TX300 S3 Server is an Intel-based server for medium-sized

and large networks. The server is suitable for use as a file server as well as an

application, information, or Internet server. It is available as a floorstand or rack

model. The floorstand model can be converted to a rack model using an optional

conversion kit.

1.1 Overview of the documentation

Concept and target groups

This Service Supplement completes the information given in the Operating

Manual, the Options Guide and the Technical Manual of the system board.

The activities described in this manual may only be performed by service

personnel.

Service DVD

Service partners of Fujitsu Siemens can order a Service DVD PRIMERGY. On

the DVD the following manuals are available in pdf format:

– The “Safety notes and other important information” manual

– The Operating Manual for PRIMERGY TX300 S3

– The Technical Manual for the system board D2129

– The Options Guide for PRIMERGY TX300 S3

– The Service Supplement PRIMERGY TX300 S3

– The “BIOS Setup” manual

6 Service Supplement TX300 S3

Overview of the documentation Introduction

Information/procedure Manual

Detailed safety notes Safety

Features and technical data of the server Operating Manual

Installation and operation, among other things:

– External ports

– Operation

– Configuration of the server

– Installation of the rack mounting kit

Troubleshooting

Installation/removal of all hot-plug components:

– hot-plug power supply units

– hot-plug hard disk drives

– hot-plug system fans / processor fans

– hot-plug PCI boards

Information about the system board:

– Features of the system board

– Board layout

– Jumper settings

–LEDdisplays

– Replacing the battery

Technical Manual

Table 1: Overview of the documentation TX300 S3

TX300 S3 Service Supplement 7

Introduction Overview of the documentation

Extensions and upgrades:

IFor some components only the installation

routine is described in the Options Guide.

Removing this components proceed in

reverse order.

– Extending/replacing the main memory

– Installing a second processor / replacing the

processor / replacing the heat sink

– Installing the ROMB upgrade kit

– Installing accessible drives

– Installing a Local View module

– Installing the SAS/SATA hard disk extension box

– Installing controller in the non-hot-plug PCI slots

– Installing a parallel interface for printers

– Converting from the floorstand model to the

rack model

Options Guide

Cabling

Replacement routines:

– Replacing the operating panel

– Replacing the processor fan holder

– Replacing the Power backplane

– Replacing the SAS/SATA backplane

– Replacing the intrusion switches

– Replacing the IDTEMP Combo

– Replacing the system board

Service Supplement

Board layout

BIOS setup BIOS Setup

Information/procedure Manual

Table 1: Overview of the documentation TX300 S3

8 Service Supplement TX300 S3

Notational conventions Introduction

1.2 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands, menu items or software programs.

„Quotation marks“ indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Table 2: Notational conventions

TX300 S3 Service Supplement 9

2Procedure

VCAUTION!

The actions described in these instructions should only be performed by

service personnel.

ÊFirst of all please familiarize yourself with the safety instructions in the

section chapter “Safety notes” on page 11 et seq. .

ÊEnsure that all required manuals (see Service DVD) are available, printing

out the PDF files if necessary. You will definitely need the Operating Manual

for the server, the Options Guide for the server and the Technical Manual for

the system board.

ÊShut down the server correctly, switch it off, pull out the power plug, and

open the server as described in the chapter “Replacement routines” on

page 17 et seq. .

ÊReplace the defective component as described in the relevant chapter.

IProcedures which are identical for the floorstand and rack models are

only described for the floorstand model.

ÊClose the server.1

ÊConnect the cables. 1

ÊConnect the server to the power outlet.1

ÊStart the operating system.1

ÊIf necessary, configure the server as required.1

1This procedures are described in the Operating Manual.

Otros manuales para PRIMERGY TX300 S3

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu PRIMERGY BX900 Guía rápida de usuario

Fujitsu

Fujitsu SPARC ENTERPRISE T5220 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX600 S6 Manual del propietario

Fujitsu

Fujitsu Primergy TX300 S4 Guía

Fujitsu

Fujitsu PRIMERGY TX100 S2 Manual del propietario

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX150 S2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX200 S7 Manual de usuario

Fujitsu

Fujitsu S140 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX200 S5 Manual de usuario

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Manual técnico

Fujitsu

Fujitsu PRIMERGY TX200 S7 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2540 M1 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T2000 Manual de usuario

Fujitsu

Fujitsu PRIMEPOWER 650 Guía de referencia rápida

Fujitsu

Fujitsu PRIMEPOWER850 Manual de usuario

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Manual del propietario

Fujitsu

Fujitsu PRIMERGY TX1320 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2540 M2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX150 S7 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX620 S4 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M3000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY GX2460 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX924 S3 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario