Fujitsu PRIMERGY RX600 S5 Manual de usuario

Options Guide - English

PRIMERGY RX600 S5 Server

Options Guide

August 2012

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

E-Mail: [email protected]su.com.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third-party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

RX600 S5 Options Guide

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety notes and other important information" and

ensure these safety notes are understood before using the product. Keep this

manual and the manual "Safety notes and other important information" in a safe

place for easy reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

OptionsGuide RX600 S5

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, "high safety use"). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market: About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

RX600 S5 Options Guide

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– USB Flash Module (UFM)

– Replacing the lithium battery

OptionsGuide RX600 S5

RX600 S5 Options Guide

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 9

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10

1.3 Extensions and conversions . . . . . . . . . . . . . . . . . 11

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 12

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 15

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 22

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.1 Population rules . . . . . . . . . . . . . . . . . . . . . . . . 26

5.2 Expanding the main memory . . . . . . . . . . . . . . . . . 28

5.2.1 Filling empty slots of a populated board . . . . . . . . . . . . . 28

5.2.2 Installing an additional memory board . . . . . . . . . . . . . . 31

6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6.1 Installing additional processors . . . . . . . . . . . . . . . . 33

6.2 Replacing a processor . . . . . . . . . . . . . . . . . . . . . 41

6.3 Replacing the heat sink . . . . . . . . . . . . . . . . . . . . 45

7 Tape drives . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

OptionsGuide RX600 S5

Contents

7.1 Removing the module frame . . . . . . . . . . . . . . . . . . 48

7.2 Installing the tape drive . . . . . . . . . . . . . . . . . . . . . 50

7.3 Cabling the tape drive . . . . . . . . . . . . . . . . . . . . . 52

7.3.1 Cabling the USB tape drive . . . . . . . . . . . . . . . . . . . 53

7.3.2 Cabling the SAS tape drive . . . . . . . . . . . . . . . . . . . 55

8 Expansion cards and BBU . . . . . . . . . . . . . . . . . . . 57

8.1 Installing expansion cards . . . . . . . . . . . . . . . . . . . 58

8.2 Installing a BBU . . . . . . . . . . . . . . . . . . . . . . . . . 63

9 Further options . . . . . . . . . . . . . . . . . . . . . . . . . 69

9.1 TPM (Trusted Platform Module) . . . . . . . . . . . . . . . . . 69

9.2 UFM (USB Flash Module) . . . . . . . . . . . . . . . . . . . . 72

10 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

11 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

11.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

RX600 S5 Options Guide 9

1 Preface

The scalable PRIMERGY RX600 S5 Server is an Intel-based rack server for

critical company scenarios, e.g. a database management system for medium or

large-sized databases or as a consolidation basis to run a vast number of

different applications using virtualization technologies.

Thanks to its highly developed hardware and software components, the server

offers a high level of data security and availability. These include hot-plug HDD

modules, hot-plug system fans, hot-plug power supply units, the Server

Management ServerView Suite, Prefailure Detection and Analysis (PDA) and

Automatic Server Reconfiguration and Restart (ASR&R).

Security functions in the BIOS setup and on the system board protect the data

on the server against manipulation. Additional security is provided by the

lockable rack door.

The server is used exclusively as a rack model. It offers a whole host of

configuration options but only uses four height units in the 19-inch rack.

1.1 Concept and target groups

This Options Guide shows you how to extend and upgrade your server.

VCAUTION!

The activities described in this manual may only be performed by

technical specialists.

IThe installation and removal of the hot-plug components is described in

the Operating Manual supplied with the server.

10 OptionsGuide RX600 S5

Documentation overview Preface

1.2 Documentation overview

More information on your PRIMERGY RX600 S5 can be found in the following

documents:

– "Quick Start Hardware - PRIMERGY RX600 S5" leaflet

"はじめにお読みください -PRIMERGY RX600 S5" for the Japanese market

(only included as a printed copy)

– "Quick Start Software - Quick Installation Guide" DVD booklet

(only included with the ServerView Suite as a printed copy) except for the

Japanese market

– "Safety notes and other important information" manual

"安全上の注意およびその他の重要情報 " for the Japanese market

– "Warranty" manual

"保証書 " for the Japanese market

– "ServerView Suite Local Service Concept - LSC" manual

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for the Japanese market

– "PRIMERGY RX600 S5 Server Operating Manual"

– "PRIMERGY RX600 S5 Server Options Guide"

– "System Board D2870 for PRIMERGY RX600 S5 Technical Manual"

– "D2870 BIOS Setup Utility for PRIMERGY RX600 S5" manual

IPRIMERGY manuals are available in PDF format on the

ServerView Suite DVD 2. The ServerView Suite DVD 2 is part of the

ServerView Suite supplied with every server.

If you no longer have the ServerView Suite DVDs, you can obtain the

relevant current versions using the order number U15000-C289 (the

order number for the Japanese market: please refer to the configurator

of the server http://primeserver.fujitsu.com/primergy/system.html).

The PDF files of the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found using the URL (for EMEA market):

http://manuals.ts.fujitsu.com. The PRIMERGY server documentation can

be accessed using the Industry standard servers navigation option.

For the Japanese market please use the URL:

http://primeserver.fujitsu.com/primergy/manual.html.

Otros manuales para PRIMERGY RX600 S5

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu Primergy BX920 S3 Manual de usuario

Fujitsu

Fujitsu Primergy CX270 S2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX100 S3 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX600 Manual de usuario

Fujitsu

Fujitsu Primergy RX4770 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX100 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX1330 M4 Manual de usuario

Fujitsu

Fujitsu Primergy BX900 S2 Manual de usuario

Fujitsu

Fujitsu l ETERNUS AF Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX924 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX1330 M2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY CX400 M4 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M3000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX200FT S2 Guía

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX140 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX150 S6 Guía

Fujitsu

Fujitsu PRIMERGY Econel 100 Manual de usuario

Fujitsu

Fujitsu Primergy RX300 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY CX2550 M4 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M3000 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M4000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY H200 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario