Fujitsu DESKPOWER 2000 Series Manual de usuario
i
DESKPOWER 2000 Series User’s Manual
Fujitsu endeavours to ensure that the information in this document is correct,
but accepts no liability for any error or omission in the same. Any procedures
described in this document for operating Fujitsu products should be read and
understood by the operator before such products are used. To ensure that Fujitsu
products function without risk to safety and health, such procedures should
be strictly observed by the operator. The development of Fujitsu products and
services is continuous and published information may not be up to date.
Any particular issue of a product may contain facilities not described herein.
It is important to check the current position with Fujitsu. Specifications and
statements as to performance in this document are Fujitsu estimates intended for
general guidance. They may require adjustment in particular circumstances and
should therefore not be taken as formal offers or commitments.
DESKPOWER is a trademark of Fujitsu Limited. The following are registered
trademarks of Microsoft Corporation: MS, MS-DOS, Windows®NT, Windows®for
Workgroups, Windows®98. Pentium®and MMX™ technology are trademarks of
Intel Corporation. Award is the registered trademark of Award Software
International Inc.
All other products are trademarks or registered trademarks of their respective
companies.
© Copyright 1999 Fujitsu Limited. All rights reserved. No part of this publication
may be copied, reproduced, or translated without the prior written consent of
Fujitsu Limited. No part of this publication may be stored or transmitted in any
electronic form without the written consent of Fujitsu Limited.
© Copyright Fujitsu PC (Asia) Pte Ltd
Fujitsu PC (Asia) Pte Ltd
200 Pandan Loop
#05-03 Pantech 21
The Computer Centre
Singapore 128388
Tel: 65-776 0688
Fax: 65-776 0788
She int _i-xv 19/1/00, 16:271
ii
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions carefully. Save these instructions for future reference.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator or
heat register, or in a built-in installation unless proper ventilation is provided.
7. This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult your
dealer or local power company.
8. This product is equipped with a 3-wire grounding-type plug, a plug having a
third (grounding) pin. This will only plug into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the
purpose of the grounding-type plug.
9. Do not allow anything to rest on the power cord. Do not locate this product
where persons will walk on the cord.
She int _i-xv 19/1/00, 16:272
iii
10. If an extension cord is used with this product, make sure that the total ampere
rating of the equipment plugged into the extension cord does not exceed the
extension cord ampere rating. Also, make sure that the total rating of all
products plugged into the wall outlet does not exceed 15 amperes.
11. Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
12. Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing
to qualified service personnel.
13. Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally when the operating instructions
are followed. Adjust only those controls that are covered by the operating
instructions since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need
for service.
14. CAUTION. When replacing the battery, be sure to install it with the polarities
in the correct position. There is a danger of explosion if the battery is
replaced with an incorrect type or is mistreated. Do not recharge,
disassemble or dispose of in fire. Replace only with the same or equivalent
type recommeded by the manufacturer. Dispose of the used battery
according to the manufacturer’s instructions.
15. Use only the proper type of power supply cord set (provided in your keyboard
manual accessories box) for this unit. It should be a detachable type: UL
listed/CSA certified, type SVT/SJT, rated 6A 125V minimum, VDE approved or
its equivalent. Maximum length is 15 feet (4.6 meters).
She int _i-xv 19/1/00, 16:273
iv
Starting your PC
for the first time
She int _i-xv 19/1/00, 16:274
v
Starting your PC for the first time
Booting the System
When you turn on your PC for the first time, it will display a Fujitsu logo on the
screen. If you do nothing, the system will read the hard drive for the operating
system software, flash the system configuration information on the screen, and
then Setup Wizard Screen will appear. You will then be stepped through the
Conditions of Use process. You must complete this initial process before you will
be able to use your PC.
If you turn off the power without using the on screen Cancel button, you will get
an error message when you start your PC again. For system preload with
Windows®98, refer to Section A – Finishing Setup and Starting Windows®98.
Read Section B – Finishing Setup and Starting Windows®NT if your system
preloads with Windows®NT.
A. Finishing Setup and Starting Windows®98
Conditions of Use Process
The first time you start your PC, you must confirm your acceptance of the copyright
limitations for your pre-installed software. After you complete the Conditions of Use
process, these screens will not appear again.
You cannot use your PC until the Conditions of Use process is completed. The
bottom of each screen has a < Back button, a Next > button and a Cancel button
which are activated by the integrated cursor control and button click. The < Back
button will return you to the previous screen. The Next > button activates any
choices or information you have entered and takes you on to the next screen. The
Cancel button allows you to stop the Setup process.
If you stop the process, your PC will start up at the beginning of the Windows®
98 Setup Wizard.
User Information
Fill in your name and your company name as you want the software licensed. When
the information has been entered, click on the Next > button. You will not be
allowed to continue until you make an entry.
She int _i-xv 19/1/00, 16:285
vi
License Agreement
Read the license agreement carefully. You can scroll through the text using the
mouse to activate the scroll bar or use the up arrow ↑and down arrow ↓keys to
move up and down the text one line at a time or use the Page Up or Page Down
keys to move the text one screen at a time. When you finish reading, you must
point and click to accept or reject the terms of the agreement and then click on the
Next > button.
If you reject the terms of the license agreement, you will be asked to review the
license agreement for information on returning the Windows®98 or to shutdown
your PC.
Certificate of Authenticity
Look in the box that your PC came in and you will find a Windows®98 Certificate of
Authenticity and a Windows®98 Users Manual. On the certificate and also on the
back of the manual, you will find a barcode with a number above it. These numbers
should be the same, they are your product code and the number you should enter
on the Certificate of Authenticity screen. When you enter the number exactly as
shown, click on the Next > button.
She int _i-xv 19/1/00, 16:286
vii
Time Zone
When your PC has completely identified all of the installed hardware, it will display
a dialog box entering which time zone you wish to set the clock to.
Windows®Messaging
Once you have selected a time zone, you will see a screen announcing that
Windows®messaging is being set up.
Printer Setup
When the messaging setup is complete, a dialog box will appear for selecting
which printer is to be attached to your system. You do not have to select a printer,
so click on the Cancel button. If you wish to select a printer, click on the Next >
button and answer the questions.
Welcome to Windows®98
Once you have completed the printer setup or chosen not to set up a printer at this
time, you will see the welcome screen for Windows®98. You can choose:
Windows®Tour; What’s New; Online Registration; or Close. You are now in the
Windows®98 operating system and the Conditions of Use process will not be
repeated.
She int _i-xv 19/1/00, 16:287
viii
B. Software Drivers and Application
You will find a Composite CD packet in your accessories box. Please store the
packet in a safe place in case there is a loss of data and it becomes necessary to
reinstall your operating system and/or applications. The Composite CD will
contain all the necessary drivers for re-loading.
C. Learning About Your Operating System and Application Software
Tutorials
All operating systems and most application software have tutorials built-in. We
highly recommend that you step through your tutorial before you use an application
even if you are familiar with the same application on a different machine, an
earlier version of the application, or a similar product.
Manuals
In the accessories box, you will find user manuals for Windows®98 or other pre-
installed software.
We recommend that you review these manuals for general information on the
use of these applications and to get a basic understanding of what is covered in
the manual, and how it is organized, should questions arise as you use the
applications.
She int _i-xv 19/1/00, 16:288
ix
About this manual
She int _i-xv 19/1/00, 16:289
x
About this Manual
Purpose
This user’s guide aims to give you all the necessary information to enable you to
operate the system properly.
Manual Structure
This user’s guide consists of two chapters.
Chapter 1 System Board
This chapter describes the system board and all its major components. It
contains the system board layout, jumper settings, cache and memory
configuration, and information on other internal devices.
Chapter 2 BIOS Configuration
This chapter gives information about the system BIOS and tells how to
configure the system by changing the settings of the BIOS parameters.
She int _i-xv 19/1/00, 16:2810
Otros manuales para DESKPOWER 2000 Series
2
Tabla de contenidos
Otros manuales de De oficina de Fujitsu
Fujitsu
Fujitsu ESPRIMO P2560 Manual de usuario
Fujitsu
Fujitsu SCALEO E Manual de usuario
Fujitsu
Fujitsu SCENIC S Manual de usuario
Fujitsu
Fujitsu SCENIC8651 Manual de usuario
Fujitsu
Fujitsu ESPRIMO P Manual de usuario
Fujitsu
Fujitsu ESPRIMO K55x/24 Series Manual de usuario
Fujitsu
Fujitsu PRIMEHPC FX1000 Manual de usuario
Fujitsu
Fujitsu CELSIUS W520 Manual de usuario
Fujitsu
Fujitsu ErgoPro m664 Series Manual de usuario
Fujitsu
Fujitsu DESKPOWER 500 Series Manual de usuario
Fujitsu
Fujitsu CELSIUS R940 Manual de usuario
Fujitsu
Fujitsu ESPRIMO P5730 Manual de usuario
Fujitsu
Fujitsu AMILO M Series Manual de usuario
Fujitsu
Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD... Manual de usuario
Fujitsu
Fujitsu DESKPOWER E623 Manual de usuario
Fujitsu
Fujitsu DESKPOWER P303 Manual de usuario
Fujitsu
Fujitsu CELSIUS W5012 Manual de usuario
Fujitsu
Fujitsu CELSIUS R920 Manual de usuario
Fujitsu
Fujitsu AMILO Pro Hoja de información del producto
Fujitsu
Fujitsu CELSIUS W550 Manual de usuario
