FujiFilm Revoria Press E1136 Manual de usuario
January 2022 GM1073E2-2 Ver. 1
FUJIFILM Business Innovation Corp.
Revoria Press
E1136/E1125/E1110/E1100
Reference Guide
Main Unit
2
Reference Guide Main Unit
1Preface
A guide describing the basic operations, maintenance and precautions for use of the main unit.
Caution
In this manual, safety instructions are preceded by the symbol . Always read and follow the
instructions before performing the required procedures.
As the copying device contains a feature designed to prevent forging of certain documents, there
may be rare instances where copies or scanned images do not achieve the desired results.
If a malfunction occurs with the machine's storage media, any received or stored data including
registered configurations may be lost. Our company is not responsible for any direct or indirect
damages arising from or caused by such data loss.
Our company is not responsible for any breakdown of machines due to infection of computer virus
or computer hacking.
The printed image may fade or peel off due to moisture caused by water, rain or vapor. For more
information, contact your local representative.
Notation in this document
Regarding the notations and trademarks in this document, see the index page (HTML).
This manual may not be edited, modified or copied in whole or part without the written consent
of the publisher.
Parts of this manual is subject to change without prior notice.
The screen shots and the illustrations in this manual are used as examples. They may differ from
yours depending on the model, the software, or the OS.
3
2 Before Using the Machine
2Before Using the
Machine
2.1 Device Components
Front
No. Component Function
1 Document Cover Holds a document in place.
2 Document Glass Load a document here.
3 Control Panel Consists of operation buttons, LED indicators, and the
Touch Panel Display.
4TonerCover Openthiscover to replace toner.
5 Front Cover Open this cover to clear paper jams or replace the
consumables.
6 Waste Toner Container Cover Open this cover to replace the Waste Toner Container.
7 Paper Trays 1, 2, 3, 4 Load paper here.
1 3
4
5
6
7
98
10
11
2
4
Reference Guide Main Unit
Right Side and Rear
LAN connection
When connecting to the network port, keep the machine power switched off.
Note
When a connection failure occurs, it may be improved by setting [Disabled] in > [Settings] > [Network
Settings] > [Protocol Settings] > [Ethernet Settings]> [Energy Efficient Ethernet] in the System
Administrator mode.
USB connection
When connecting to a USB connector, keep the machine power switched off.
8 Locking casters Used to move this machine.
9 Lower Left Cover Open this cover to clear paper jams.
10 Paper Tray 5 (Bypass) Used for loading non-standard paper that cannot be
loaded in Trays 1, 2, 3, 4.
11 Paper Tray 5 (Bypass) Top Cover Open this cover to clear paper jams.
No. Component Function
1 Network Port (optional) Connects to a network cable.
2 Network Port Connects to a network cable.
3 USB 2.0 interface connector Connects to a memory card reader, an optional
component or a peripheral with a USB cable.
4 TEST button Automatically switches the machine off when a current
leakage is detected.
5 RESET button Automatically switches the machine off when a current
leakage is detected.
No. Component Function
1
2
3
4
5
5
2 Before Using the Machine
Inside
No. Component Function
1 Output Tray Outputs are delivered here.
2 Lower Right Cover Open this cover to clear paper jams.
3 Waste Toner Container Cover Open this cover to replace the Waste Toner Container.
4 Waste Toner Container Collects waste toner.
5 Fusing Unit Fuses toner on paper.
6 Handle Used to pull out the Transfer Unit.
7 Transfer Unit Transfers toner images on the drum to paper.
8 Lock Release Handle Release the lock to replace Toner Cartridges.
9 Toner Cartridge Contains the toner (image forming powder).
1
3
2
4
5
6
9
8
7
6
Reference Guide Main Unit
Control Panel
Refer
For Control Panel, refer to the “Reference Guide - Operations”.
No. Component Function
1 Built-in IC Card
Reader (optional)
Used to authenticate a user using an IC card.
2 Paper Clip Tray Used for placing paper clips and staples.
3 Power Button The power switches on.
Note
When “Please wait...” is displayed, the machine is warming up.
The use of machine is not available during this time.
If the power does not switch on, confirm that the Reset button
is in the reset position (button is pushed in) and the power plug
is connected.
4 Home Button Pressing this button displays the Home screen.
Note
When the Home button is pressed, the settings of all applications
in operation are reset.
5 Touch Panel Display Displays messages required for operation, and buttons for various
features.
6 Status Display
Indicator
The indicator lights up in green at an instant of operation reception.
When an error occurs, the lamp blinks in orange.
7 Data Indicator This indicator blinks while data is being sent from the machine or
data is being received from the client computer.
8 NFC touch area This is an area for you to hold up your NFC-supported mobile devices
over. To communicate interactively, the NFC function of this machine
needs to be enabled.
12345
6789
7
2 Before Using the Machine
2.2 Print Area
In the case of printing
Image Loss Width (mm)
There is an unprintable area (image loss area) along all four edges of the paper.
The image loss widths are 5.0 mm at the lead edge, 5.0 mm at the trail edge, 5.1 mm at the top edge,
and 5.1 mm at the bottom edge.
Guaranteed Print Area (mm)
The following are the areas for which the image quality is guaranteed.
9USBmemoryslot
(optional)
Insert a USB memory device directly here.
Note
A memory card reader or a USB memory device cannot be
connected to the USB memory slot with a USB cable. Note that
the machine will not recognize the memory on a memory card
reader or a memory device connected to a USB interface
connector on the rear side of the machine when a USB memory
device is already inserted in the USB memory slot.
Copying max. 297 x 432
Printing max. 310 x 478
No. Component Function
Extended printable area = Guaranteed print area
Standard Printable Area
Feed direction
488 mm
5.0 mm 478 mm
Lead edge 5.0 mm
478 mm
Trail edge 5.0 mm
5.0 mm
10.1 mmTop edge 5.1 mm
330.2 mm
310 mm
320 mm
10.1 mm
Bottom edge 5.1 mm
8
Reference Guide Main Unit
Standard Printable Area (mm)
Extended Printable Area (mm)
You can extend the printable area.
The machine cannot print on any area within 3.0 mm from all four edges of the paper.
Changing the extended printable area settings
1.
Login to the System Administrator Mode.
2.
Tap > [Settings] > [App Settings] > [Print Settings] >
[Other Settings] > [Print Area] > [Extended].
When printing in the extended printable area via driver, change
the settings from [Tray / Output] > [Edge Erase / Print Position] >
[Margins] of the PCL printer driver.
2.3 Paper
Recommended Paper
Standard paper
To use paper other than the above, contact our customer support center or sales agency.
Copying max. 320 x 432
Printing max. 320 x 478
Long paper max. 320 x 650
Paper name Paper type setting for
paper tray
Image quality
guarantee
Paper weight
(g/m
2
)
Business paper Uncoated Monochrome 80
EP paper Uncoated Monochrome 65
9
2 Before Using the Machine
Unusable paper
Avoid using the following paper to prevent machine malfunction.
There are more types of unusable paper other than the above. For details, contact our customer
support center or sales agency.
Storing and Handling Paper
Storing paper
Follow the guidelines below since paper is susceptible to moisture in the air and easily deformed by
impacts.
Store paper in a place of low humidity. Paper that has absorbed moisture can create paper jams or
poor image quality.
Using paper stored in a low-temperature environment may cause fusing failures. Storing paper in
an environment where the temperature is 16°C or higher is recommended.
Coated paper stored in a high-temperature, high-humidity environment may cause misfeeding or
double-feeding.
After opening a package of paper, seal and store the remaining paper in a moisture-proof wrapper
or a reclosable plastic bag.
To prevent bending or warping, store paper flat. Do not store it upright.
Do not store paper under direct sunlight.
Handling paper
Do not use collected pieces of paper.
Do not use wrinkled or folded paper.
Do not load paper of different sizes or types in the same tray.
Before loading paper into the tray, fan a stack of paper well to prevent paper jams and double-
feeding (multiple sheets of paper are being fed simultaneously) of transparency films, films and
coated paper.
Paper using ink that deteriorates with fusing
heat
Damp paper, damp and wavy paper
Ink jet printer paper
Paper with 12 mm or greater curl
Business card size paper
Thermal paper, heat-transfer paper
Wrinkled or folded paper
Envelopes with windows
10
Reference Guide Main Unit
3Basic Operations of the
Machine
3.1 Loading Paper
After loading paper, configure the Paper Tray settings on the Home screen.
Important
Do not place paper or other objects in the reserved space of the tray. It may cause paper jams or machine
malfunction.
Note
While the printer is processing a job, do not remove the Paper Tray used for the job.
Before loading the paper into the Paper Tray, fan a stack of paper well. This will separate the sheets, and
it can prevent paper jamming.
It is recommended to use our recommended papers. Print may not be done correctly according to the use
conditions.
Refer
For details, refer to “Setup” in “Reference Guide - Operations”.
Paper Trays 1, 2
The paper feeding method is the same for Paper Trays 1 (left side) and 2 (right side).
The bottom face of loaded paper is the surface printed on.
Loadable paper
1.
Pull out the Paper Tray until it stops.
2.
When paper is already loaded in the tray, take out the paper.
Paper size Standard size Max A4, Letter
Min JIS B5
Paper weight (g/m
2
)Single side printing 52 to 216
Maximum number of sheets (sheets) (80 g/m
2
paper) Tray 1 1,100
Tray 2 1,600
Otros manuales para Revoria Press E1136
3
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Impresora de FujiFilm
FujiFilm
FujiFilm Apeos C7070 Manual de instrucciones
FujiFilm
FujiFilm SP-3000 Manual de usuario
FujiFilm
FujiFilm B9136 Manual de usuario
FujiFilm
FujiFilm PICTROGRAPHY 4500 Manual de usuario
FujiFilm
FujiFilm ASK-400 Manual de usuario
FujiFilm
FujiFilm ApeosPort-VII 4021 Manual de usuario
FujiFilm
FujiFilm ApeosPro C810 Manual de usuario
FujiFilm
FujiFilm instax mini Link 2 Manual de usuario
FujiFilm
FujiFilm Pivi MP-300 Manual de usuario
FujiFilm
FujiFilm Xerox Phaser 6270 Manual de usuario
FujiFilm
FujiFilm PSC2D Manual de usuario
FujiFilm
FujiFilm Pictrography 3500 Manual de usuario
FujiFilm
FujiFilm PICTROGRAPHY 4500N Manual de usuario
FujiFilm
FujiFilm Revoria Press EC1100 Manual de usuario
FujiFilm
FujiFilm instax mini Link 2 Manual de usuario
FujiFilm
FujiFilm Apeos 5330 Manual de usuario
FujiFilm
FujiFilm Apeos C7070 Manual de usuario
FujiFilm
FujiFilm instax SQUARE Link Manual de usuario
FujiFilm
FujiFilm Frontier-S DX100 Manual de usuario
FujiFilm
FujiFilm CX-400 Manual de usuario
