FujiFilm ApeosPro C810 Manual de usuario
April 2021 GM1037E1-1 Edition1 FUJIFILM Business Innovation Corp.
ApeosPro™ C810
ApeosPro C750
ApeosPro C650
Reference Guide
Appendix
21 Preface
1Preface
A guide describing the emulation mode, direct print, web applications, troubleshooting, etc.
Refer to Reference Guide - Main Unit for trademarks and manual conventions.
This manual may not be edited, modified or copied in whole or in part without the written
consent of the publisher.
Parts of this manual are subject to change without prior notice.
The screen shots and the illustrations in this manual are used as examples. They may differ from
yours depending on the model, the software, or the OS.
3
2.1 Emulation
2Appendix
2.1 Emulation
When using the emulation mode, you can get the print results similar to those of other companies'
printers. Set in Internet Services.
Refer
For details, refer to Internet Services help.
Output of Related List
Refer
For details, refer to “Basic Operations” in Reference Guide - Operations.
Font
Available font can be confirmed by executing [Print] for [Font List] or [PCL Font List] in > [Device
Status] > [Print Reports] > [Printer Reports].
Form
You can confirm the form by execute [Print] in > [Device Status] > [Print Reports] > [Printer
Reports] > [ART IV, ESC/P User Defined List].
Barcode
You can confirm the method to specify commands by execute [Print] in > [Device Status] > [Print
Reports] > [PCL Font List].
Associated Device Menu
Log in to Administrator Mode.
Port Settings
Set in > [Device] > [Network Settings] > [Port Settings].
Enable port (USB/LPD/IPP/Port9100/WSD)
Launch the port to be used in the emulation mode.
Emulation mode [Port Settings] [Allocate Memory] [Delete Form]
ART IV Yes Yes Yes
ESC/P Yes Yes Yes
PC-PR201H Yes Yes Yes
PCL Yes - -
HP-GL, HP-GL/2 Yes Yes -
42 Appendix
Allocate Memory
Set in > [Device] > [App Settings] > [Print Settings] > [Allocate Memory].
Note
If storage is attached, the settings cannot be changed.
[ART IV User Defined Memory]
This sets capacity of memory used for user definition with ART IV. The maximum settable value
varies depending on the amount of free memory.
Refer
For other operations, refer to “Settings” in Reference Guide - Operations.
Delete Form
Set the mode to delete forms in > [Device] > [App Settings] > [Print Settings] > [Delete Form].
2.2 Direct Print
This function is used to print files directly by using lpr commands, etc. instead of a printer driver. Set
in Internet Services.
Note
When using lpr commands, set > [Device] > [Network Settings] > [Port Settings] > [LPD] > [Port
Status] to [Enabled].
Refer
For details, refer to Internet Services help.
2.3 Web Applications
This function allows you to access Web servers via networks from the browser included with this
machine in order to store or display data.
Access an external service and display an external service screen linked with this machine
Store a scanned document in a folder on a Web application linked with this machine
Print a file stored in an external server
5
2.3 Web Applications
Server Setup
1. Log in to Administrator Mode.
2. Tap on > [Device] > [App Settings] > [Web Applications Setup] > [Server Setup].
3. Select the server number to register.
4. Enter the server URL and tap on [OK].
Note
When connecting by specifying the Web browser version for Web Applications, specify the version
between the protocol type (http, https, etc.) and the colon. For example, enter “http-v4://
www.example.com” for V4 connection.
If you connect by specifying URL as the Web browser version, the setting for [Web Applications Version]
will be invalid.
62 Appendix
5. Specify the following items as necessary.
[Server Name]
Specify the displayed name for the connection destination.
[URL]
Server URL is displayed.
[Description]
Specify the description for the connection destination.
[Use User ID]
Specify whether or not to use user ID to access external services.
Note
Even if you specify [No], user ID and password may be required at the time of access.
If [Remote] is set to > [Device] > [Authentication/Accounting] > [Authentication/Security Settings] >
[Authentication] > [Authentication/Accounting Settings], the machine accesses to external services
using user information authenticated with the machine after selecting [No].
You can specify whether or not to display authentication screen when accessing an external service in
> [Device] > [App Settings] > [Web Applications Setup] > [Other Settings] > [When Sending User
Details].
[User ID]
Specify the user ID for authentication in external services.
Note
Depending on the external service, the setting may be invalid even if you specify [User ID]. Check the
setting for the used external service.
[Password]
Specify the password for authentication.
[Notify Device/Authentication Info]
You can specify whether or not to notify the information to identify this machine and the certificate
information of the user to the connection destination every time you connect to an external service.
Note
Whether or not such information will be used is determined by the connecting external service, so you
normally would not perform the setting on the operation panel.
[Notify Permission Information]
You can specify whether or not to notify the authorization information of the user to the connection
destination every time you connect to an external service.
[Functional Code]
You can specify this as necessary when using the linked service with another device.
7
2.4 Encryption and Signature Function
Server Certificate Verification
Configure the settings to verify the server certificate when connecting with an external server (ASP)
in the same manner as the Windows web browser to prevent phishing attacks.
To verify a server certificate, the route certificate (CA certificate) for the route certificate agency
issuing the server certificate is used.
Note
CA certificate files are compatible with the following formats.
- DER encoded binary X.509 format (.CER)
- Base64 encoded X.509 format (.CER)
- Cryptographic Message Syntax Standard - PKCS #7 certificate format (.P7B)
2.4 Encryption and Signature Function
Certificate
A certificate is required to use the encryption and signature functions.
To create/delete, import/export, or enable a certificate, use Internet Services.
Refer
For details, refer to Internet Services help.
2.5 Folding Position Adjustment
Confirm the printed sample, measure the misalignment between the folding and staple (for “Booklet
Creation + Staple”).
Enter the misalignment value by referring to the image on the screen and the folding position is
adjusted.
82 Appendix
How to Enter the Misalignment
How to Measure the Misalignment
Fold the printed sample.
Note
The sample is different depending on the type of folding.
Fold Position
Staple Position
Select [Left of Fold] and enter the
amount of misalignment.
Select [Right of Fold] and enter the
amount of misalignment.
Select [Left Side of Fold is Longer]
and enter the amount of
misalignment.
・If the page with the arrow is longer
Select [Right Side of Fold is Longer]
and enter the amount of
misalignment.
・If the page without the arrow is longer
For a saddle stitch / bi-fold job, a crease is made on paper sheets prior to
folding them to mitigate cracking of toner that can occur along the crease.
Crease Position
When the Crease/Two-sided Trimmer is installed
Select [Left Side of Fold is Longer] and
enter the amount of misalignment.
・If the page with the arrow has a crease on it
Select [Right Side of Fold is Longer] and
enter the amount of misalignment.
・If the page without the arrow has a crease on it
・If the page with the arrow has staples on it ・If the page without the arrow has staples
on it
9
2.5 Folding Position Adjustment
1. Fold the sample and the align the positions of printed -> and the counter part of the image on the
screen, and the misalignment value among front edge, mountain part and the rear edge of the
folded paper.
2. Enter the misalignment value of “+” and “-” (depending on the misalignment direction) by
referring to the image on the screen and the mountain folding position is adjusted.
How to Adjust the Folding Position
Here is the description using Z fold as an example.
If you follow the procedure, the folding position is adjusted to the finish shown following. (for A3)
A When shorter than the edge of the crease 2 (same as the image on the screen):
enter “+” value
When longer than the edge of the crease 2 (reverse to the image on the screen):
enter “-” value
B When longer than the edge of the crease 3 (same as the image on the screen): enter
“+” value
When shorter than the edge of the crease 3 (reverse to the image on the screen):
enter “-” value
Enter a "+" measurement value. Enter a "-" measurement value.
A
+ value
+ value Front edge
Direction of adjustment Direction of adjustment
Front edge
A
B
- value
- value
1
2
1
2
B
210 mm (A) 110 mm 110 mm
420 mm
Standard Z fold ("A" Length: 210 mm, "B" Length: 0 mm)
A=210 mm
B=0 mm
10 2 Appendix
When Adjusting the Fold to the Any Length
You need to enter the value calculated based on measured value and the target value.
The calculating method is the following.
Value to enter (A) = 210 + (“measured value” - “target value”)
Value to enter (B) = “measured value” - “target value”
For example, when adjusting as the shown below, calculate as the following.
Target length and measured value (example)
The target length is 206 mm for A and 2 mm for B.
The measured length is 214 mm for A and 6 mm for B.
Calculation formula (example)
Value to enter in A: 210 + (“214 (measured value)” - “206 (target value)” ) = “218”
Value to enter in B: “6 (measured value)” - “2 (target value)” = “4”
Note
The target value A&B can be set within the following range.
*1: For A3, 210 to 205 mm
Target value C Fold Z Fold Z Fold Half Sheet
A 0 to 2 mm 0 to 2 mm (Paper length/2 - 5) mm to
(Paper length/2) mm *1
B 0 to 8 mm 0 to 2 mm 0-2 mm
206 mm (A) 108 mm 106 mm
420 mm
Target value ("A" Length: 206 mm, "B" Length: 2 mm)
A=206 mm
B=2 mm
214 mm (A) 106 mm 100 mm
420 mm
Measured value ("A" Length: 214 mm, "B" Length: 6 mm)
A=214 mm
B=6 mm
Otros manuales para ApeosPro C810
5
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Impresora de FujiFilm
FujiFilm
FujiFilm ASK-300 Manual de usuario
FujiFilm
FujiFilm JAVELIN 8300N-S Manual de usuario
FujiFilm
FujiFilm Frontier-S Series Manual de usuario
FujiFilm
FujiFilm Frontier DE100 Manual de usuario
FujiFilm
FujiFilm instax mini Link Manual de usuario
FujiFilm
FujiFilm PICTROGRAPHY 4500N Manual de usuario
FujiFilm
FujiFilm ASK-300 Manual de usuario
FujiFilm
FujiFilm instax SQUARE Link Manual de usuario
FujiFilm
FujiFilm ApeosPort C7070 Manual de usuario
FujiFilm
FujiFilm CX 3240 Manual de usuario
FujiFilm
FujiFilm instax SHARE SP-2 Manual de usuario
FujiFilm
FujiFilm CX-400 Manual de usuario
FujiFilm
FujiFilm Apeos C7070 Manual de usuario
FujiFilm
FujiFilm ASK-300 Manual de usuario
FujiFilm
FujiFilm FM-DP L Manual de usuario
FujiFilm
FujiFilm instax mini Link 2 Manual de usuario
FujiFilm
FujiFilm C 9070 9065 Manual de usuario
FujiFilm
FujiFilm B9136 Manual de usuario
FujiFilm
FujiFilm instax Link WIDE FI022W Manual de usuario
FujiFilm
FujiFilm ASK-2500 Manual de usuario
