FS FFOI-605 Manual de usuario
250X FIBER OPTIC INSPECTION
PROBE MICROSCOPE
FFOI-605
Quick Start Guide V1.0
Microscope Displays
Hand-held Fiber
Power
Introduction
FFOI-605
The FFOI-605 250X fiber optic inspection probe microscope is a portable, video microscope used to
inspect fiber optic terminations. More specifically, it is used to inspect hard-to-reach connectors that
are installed on the "backside" of patch panels or inside hardware devices. It eliminates the need to
access the backside of patch panels or disassemble hardware devices prior to inspection.
Microscope Displays
Hand-held Fiber
Power
Accessories
LC-U-F x1
AC Adapter x1
125-U-M x1 FC-PC-F x1 SC-PC-F x1 25-U-M x1
LC-U-F 125-U-M FC-PC-F SC-PC-F 25-U-M
Function Introductions
FC/SC/ST/LSH patch cord UPC termination
LC/MU patch cord UPC termination
FC/SC/ST/LSH patch cord APC termination
LC/MU patch cord APC termination
FC UPC bulkhead
SC UPC bulkhead
LC UPC bulkhead
SC APC bulkhead
FC APC bulkhead
LC APC bulkhead
Adapter Type Description
25-U-M
(2.5mm UPC Male)
125-U-M
(1.25mm UPC Male)
25-A-M
(2.5mm APC Male)
125-A-M
(1.25mm APC Male)
FC-PC-F
(FC UPC Female)
SC-PC-F
(SC UPC Female)
LC-U-F
(LC UPC Female)
SC-A-F
(SC APC Female)
FC-A-F
(FC APC Female)
LC-A-F
(LC APC Female)
Microscope Displays
Hand-held Fiber
Power
LCD
Power Indicator
Power Switch
Installing
1. Locate tip you want to install and look at the threaded end. This screw acts as a "key" and is already
mounded with the key channel. Do not try to screw the key channel off from the threaded key, which
might destroy the whole probe.
2. Slightly screw the key that you need onto the key channel.
4-pin Connector Power Connector
Brightness Control
Barrel Assembly Hand Knob
Focus Control Coil Cable
25-U-M
Operation Instructions
1. Using the LCD display with probe connect the probe to the display.
Step 1: Connect the cable from the probe to the monitor using the 4-pin connector
on the bottom of the monitor.
Step 2: Connect the AC power adapter/charger if necessary.
Probe 12.6V DC
Probe 12.6V DC
2. On/Off Control
Press the power switch to turn the unit on, then press it again to shut the unit off.
3. AC Power
Using the DC/AC power adapter has the following advantages:
Use external power (DC/AC power adapter/charger) to power the LCD directly from a DC/AC power
source, or charge the battery pack. Both can be accomplished simultaneously.
Refers to a potential product hazard, it requires a procedure which, if not correctly followed, may
result in component damage. Do not proceed unless you understand and meet the required
conditions.
Online Resources
Download https://www.fs.com/download.html
Help Center https://www.fs.com/service/help_center.html
Contact Us https://www.fs.com/contact_us.html
Maintenance
Microscope Displays
Hand-held Fiber
Power
Copyright © 2020 FS.COM All Rights Reserved.
Q.C. PASSED
FS ensures our customers that any damage or faulty items due to our workmanship, we will offer a
free return within 30 Days from the day you receive your goods.
Warranty: All Fiber Optic Inspections enjoy 1 year limited warranty against defect in
materials or workmanship. For more details about warranty, please check at
https://www.fs.com/policies/warranty.html
Return: If you want to return item(s), information on how to return can be found at
https://www.fs.com/policies/day_return_policy.html
Product Warranty
1
Tabla de contenidos
Otros manuales de Microscopio de FS
Manuales populares de Microscopio de otras marcas
VWR
VWR VisiScope 384 Series Manual de usuario
Nikon
Nikon ECLIPSE E200 POL Manual de usuario
Leica
Leica DI C800 Manual
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manual de usuario
ThermoFisher Scientific
ThermoFisher Scientific Continuµm Manual de usuario
Olympus
Olympus SZ61 Manual de usuario