Friedrich CCF05B10A Manual de usuario

1 PB

Service/ Parts Manual

RoomAir Conditioners

93011408_00

Fixed chassis, cool only

CCF05B10A, CCF06B10A, CCF08B10A, CCF10B10A

CCF12B10A

Slide out chassis, cool only

CCW06B10B, CCW08B10B,

Chill Premiere Series Models

2 PB

Table of Contents

INTRODUCTION 3

IMPORTANT SAFETY INFORMATION 3

PERSONAL INJURY OR DEATH HAZARDS 4

SPECIFICATIONS 7

Electrical Data 9

OPERATION 11

Remote Control 11

Control Panel 12

Sequence of Operation 14

COMPONENT TESTING 21

Hermetic Components Check 21

Fan Motor 22

TROUBLESHOOTING 23

Check Thermistors 23

Check Thermistors -Resistance Table of Thermistors (5K) 24

Product Does Not Operate At All 26

Indoor Fan Does Not Operate At All 27

Compressor Or Outdoor Fan Does Not Operate At All 28

Display E1 or E2 29

WIRING DIAGRAMS 30

CCF05B10A, CCF06B10A, CCF08B10A, CCF10A10B, CCF12B10A 30

CCW06B10B 31

CCW08B10B 32

PARTS CATALOG 33

CCW06B10B CCW08B10B 33

CCF05B10A CCF06B10A CCF08B10A 35

CCF10B10A CCF12B10A 37

FRIEDRICH AUTHORIZED PARTS DEPOTS 41

3 PB

Your safety and the safety of others is very

important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This is a safety Alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol with the word

“WARNING”

or “CAUTION”. These words mean:

Indicates a hazard which, if not avoided, can result in severe personal

injury or death and damage to product or other property.

Indicates a hazard which, if not avoided, can result in personal injury and

damage to product or other property.

All safety messages will tell you what the potential hazard is, tell you

how to reduce the chance of injury, and tell you what will happen if the

instructions are not followed.

Indicates property damage can occur if instructions are not followed.

WARNING

Refrigeration system

under high pressure

Do not puncture, heat, expose to ﬂame or

incinerate.

Only certiﬁed refrigeration technicians should

service this equipment.

R32 systems operate at higher pressures than

R410A equipment. Appropriate safe service and

handling practices must be used.

Only use gauge sets designed for use with R32.

Do not use standard R410A gauge sets.

NOTICE

CAUTION

WARNING

The information in this manual is intended for use by a qualiﬁed technician who is familiar with the safety procedures

required for installation and repair, and who is equipped with the proper tools and test instruments required to service

this product.

Installation or repairs made by unqualiﬁed persons can result in subjecting the unqualiﬁed person making such repairs

as well as the persons being served by the equipment to hazards resulting in injury or electrical shock which can be

serious or even fatal.

Safety warnings have been placed throughout this manual to alert you to potential hazards that may be encountered. If

you install or perform service on equipment, it is your responsibility to read and obey these warnings to guard against

any bodily injury or property damage which may result to you or others.

IMPORTANT SAFETY INFORMATION

INTRODUCTION

4 PB

SAFETY

FIRST

WARNING

ADVERTENCIA

Do not remove, disable or

bypass this unit’s safety

devices. Doing so may

cause ﬁre, injuries, or

death.

Ne pas supprime, désactiver

ou contourner cette l´unité

des dispositifs de sécurité,

faire vous risqueriez de

provoquer le feu, les

blessures ou la mort.

No eliminar, desactivar o

pasar por alto los dispositivos

de seguridad de la unidad. Si

lo hace podría producirse

fuego, lesiones o muerte.

ELECTRICAL HAZARDS:

• Unplug and/or disconnect all electrical power to the unit before performing inspections, maintenance, or service.

• Make sure to follow proper lockout/tag out procedures.

• Always work in the company of a qualiﬁed assistant if possible.

• Capacitors, even when disconnected from the electrical power source, retain an electrical charge potential capable of

causing electric shock or electrocution.

• Handle, discharge, and test capacitors according to safe, established, standards, and approved procedures.

• Extreme care, proper judgment, and safety procedures must be exercised if it becomes necessary to test or troubleshoot

equipment with the power on to the unit.

• Do not spray water on the air conditioning unit while the power is on.

• Electrical component malfunction caused by water could result in electric shock or other electrically unsafe conditions

when the power is restored and the unit is turned on, even after the exterior is dry.

• Use air conditioner on a single dedicated circuit within the speciﬁed amperage rating.

• Use on a properly grounded outlet only.

• Do not cut or modify the power supply cord or remove the ground prong of the plug.

• Never operate the unit on an extension cord.

• Follow all safety precautions and use proper and adequate protective safety aids such as: gloves, goggles, clothing,

properly insulated tools, and testing equipment etc.

• Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.

INTRODUCTION

PERSONAL INJURY OR DEATH HAZARDS

5 PB

• REFRIGERATION SYSTEM REPAIR HAZARDS:

• Use approved standard refrigerant recovering procedures and equipment to relieve high pressure before opening

system for repair.

• Do not allow liquid refrigerant to contact skin. Direct contact with liquid refrigerant can result in minor to moderate

injury.

• Be extremely careful when using an oxy-acetylene torch. Direct contact with the torch’s ﬂame or hot surfaces can cause

serious burns.

• Make certain to protect personal and surrounding property with ﬁre proof materials and have a ﬁre extinguisher at hand

while using a torch.

• Provide adequate ventilation to vent off toxic fumes, and work with a qualiﬁed assistant whenever possible.

• Always use a pressure regulator when using dry nitrogen to test the sealed refrigeration system for leaks, ﬂushing etc.

• MECHANICAL HAZARDS:

• Extreme care, proper judgment and all safety procedures must be followed when testing, troubleshooting, handling, or

working around unit with moving and/or rotating parts.

• Be careful when, handling and working around exposed edges and corners of the sleeve, chassis, and other unit

components especially the sharp ﬁns of the indoor and outdoor coils.

• Use proper and adequate protective aids such as: gloves, clothing, safety glasses etc.

• Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.

• PROPERTY DAMAGE HAZARDS

• FIRE DAMAGE HAZARDS:

• Read the Installation/Operation Manual for the air conditioning unit prior to operating.

• Use air conditioner on a single dedicated circuit within the speciﬁed amperage rating.

• Connect to a properly grounded outlet only.

• Do not remove ground prong of plug.

• Do not cut or modify the power supply cord.

• Do not use extension cords with the unit.

• Be extremely careful when using acetylene torch and protect surrounding property.

• Failure to follow these instructions can result in ﬁre and minor to serious property damage.

• WATER DAMAGE HAZARDS:

• Improper installation, maintenance or servicing of the air conditioner unit can result in water damage to personal items

or property.

• Insure that the unit has a sufﬁcient pitch to the outside to allow water to drain from the unit.

• Do not drill holes in the bottom of the drain pan or the underside of the unit.

• Failure to follow these instructions can result in damage to the unit and/or minor to serious property damage.

INTRODUCTION

PERSONAL INJURY OR DEATH HAZARDS

6 PB

INTRODUCTION

This service manual is designed to be used in conjunction with the installation and operation manuals provided with

each air conditioning system.

This service manual was written to assist the professional service technician to quickly and accurately diagnose and

repair malfunctions.

Installation procedures are not given in this manual. They are given in the Installation/Operation manual which can be

aquired on the Friedrich website.

IMPORTANT: It will be necessary for you to accurately identify the unit you are servicing, so you can be certain of a

proper diagnosis and repair.

7 PB

SPECIFICATIONS

Figure 201 (Refrigeration Systems Performance Data)

Model Cooling

Btu

Heating

Btu

Volts

Rated

Cooling

Amps

Cooling

Watts

Heating

Amps

Heating

Watts

EER CEER Moisture

Removal-

Pints/HR

Refrigerant Refrigerant

Charge

CFM Sleeve Weight

Net./

Ship lbs.

FIXED CHASSIS, COOL ONLY (WINDOW INSTALLATION ONLY)

CCF05B10A 5250 —115 3.9 420 — — 12.2 12.1 0.6 R32 8.11 141 44/51

CCF06B10A 6000 —115 5.0 490 — — 12.2 12.1 0.9 R32 9.52 141 44/51

CCF08B10A 8000 —115 6.1 640 — — 12.1 12.0 1.0 R32 10.58 206 47/53

CCF10B10A 10000 —115 8.8 810 — — 12.1 12.0 1.2 R32 12.35 282 62/70

CCF12B10A 12000 —115 10.2 980 — — 12.1 12.0 1.5 R32 18.34 270 70/77

CHILL PREMIER SLIDE OUT CHASSIS, COOL ONLY

CCW06B10B 6000 —115 5.3 590 — — 12.2 12.1 0.9 R32 9.52 200 54/60

CCW08B10B 8000 —115 6.4 720 — — 12.1 12.0 1.0 R32 10.58 250 55/61

Model Type Brand Capacity

BTU/h

Reﬁgerant Oil (ml)

FIXED CHASSIS, COOL ONLY (WINDOW INSTALLATION ONLY)

CCF05B10A Rotary GMCC 4964 190

CCF06B10A Rotary Rechi 5160 160

CCF08B10A Rotary GMCC 8172 190

CCF10B10A Rotary GMCC 9843 190

CCF12B10A Rotary GMCC 11840 320

CHILL PREMIER SLIDE OUT CHASSIS, COOL ONLY

CCW06B10B 6000 GMCC 6056 190

CCW08B10B 8000 GMCC 6284 180

Figure 202 (Compressor Performance Data)

8 PB

SPECIFICATIONS

Installation Clearances

Improper installation of the Air Condtioner can cause poor performance and premature wear of the unit.

Ensure that the unit is installed with proper clearances as described below.

Ensure no obstructions. or enclosures are within clearances limits to allow for proper airﬂow.

Clearances

Rear of Unit - Three (3) feet

Model

Height

Inches

“B”

Width

Inches

“A”

Depth

Inches

“C”

Minimum

Extension

Into Room

Inches

Minimum

Extension

Outside

Inches

Window

Width

Inches

Minimum* Maximum

CCF05B10A, CCF06B10A,

CCF08B10A

13 3/818 5/815 5/8

— —

23 36

CCF10B10A, CCF12B10A 15 1/819 3/421 1/2

— —

23 36

CCW06B10B, CCW08B10AB

13 1/218 1/219 3/4

— —

26 36

Figure 203 (Chill Premier Installation)

9 PB

SPECIFICATIONS

Electrical Data

WARNING

ELECTRIC SHOCK HAZARD

Turn off electric power before service or

installation.

All electrical connections and wiring MUST be

the National Electrical Code and all local codes

which have jurisdiction.

Failure to do so can result in personal injury or

death.

NOTICE

FIRE HAZARD

electically unsafe conditions which could cause moderate

or serious property damage.

Read, understand and follow the above warning.

Figure 204 (Circuit Breaker / Plug / Receptacle / Cord Rating)

Model Circuit Rating

Breaker or T-D Fuse

Plug Face

(NEMA#)

Power Cord

Length (ft.)

Wall Outlet

Appearance

CCF05B10A, CCF06B10A,

CCF08B10A,

125V-15A 5-15P

6.5

CCF10B10A, CCF12B10A 6

CCW06B10A, CCW08B10A, 6

10 PB

WARNING

Electrical Shock Hazard

Make sure your electrical receptacle

has the same conﬁguration as your air

conditioner’s plug. If different, consult a

Licensed Electrician.

Do not use plug adapters.

Do not use an extension cord.

Do not remove ground prong.Always

plug into a grounded 3 prong outlet.

Failure to follow these instructions can

result in death, ﬁre, or electrical shock.

Wire Size - Use ONLY wiring size recommended for single outlet branch circuit.

Fuse/ Circuit Breaker - Use ONLY the correct HACR type and size fuse/circuit breaker. Read electrical ratings on unit’s

rating plate. Proper circuit protection is the responsibiity of the homeowner.

Grounding - Unit MUST be grounded from branch circuit through service cord to unit, or through separate ground wire

provided on permanently connected units. Be sure that branch circuit or general purpose outlet is grounded.

Receptacle - The ﬁeld supplied outlet must match plug on service cord and be within reach of service cord. Do NOT alter

the service cord or plug. Do NOT use an extension cord. Refer to the table above for proper receptacle and fuse type.

Make sure the wiring is adequate for your unit.

If you have fuses, they should be of the time delay type. Before you install or relocate this unit, be sure that the

amperage rating of the circuit breaker or time delay fuse does not exceed the amp rating listed in Table 206.

DO NOT use an extension cord.

The cord provided will carry the proper amount of electrical power to the unit; an extension cord may not.

Make sure that the receptacle is compatible with the air conditioner cord plug provided.

Proper grounding must be maintained at all times. Two prong receptacles must be

replaced with a grounded receptacle by a certiﬁed electrician.

The grounded receptacle should meet all national and local codes and ordinances. You must use the three prong plug

furnished with the air conditioner. Under no circumstances should you remove the ground prong from the plug.

SPECIFICATIONS

Electrical Data

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de Friedrich

Friedrich

Friedrich Z-Star ZQ05C10 Instrucciones de construcción

Friedrich

Friedrich UE08A13A Instrucciones de construcción

Friedrich

Friedrich WALLMASTER Manual de usuario

Friedrich

Friedrich MWM12Y1J Manual de usuario

Friedrich

Friedrich ZoneAire Premier PDE07K3SGR3 Manual de usuario

Friedrich

Friedrich Z-Star ZQ05 Manual de usuario

Friedrich

Friedrich PTAC Series Manual de usuario

Friedrich

Friedrich A-SERIES Instrucciones de funcionamiento originales

Friedrich

Friedrich ZoneAire Compact P08S Manual de usuario

Friedrich

Friedrich PDXDAA Manual de usuario

Friedrich

Friedrich CP05N10A Instrucciones de construcción

Friedrich

Friedrich Kuhl series Manual de usuario

Friedrich

Friedrich 115 Volts US12 Instrucciones de funcionamiento originales

Friedrich

Friedrich VERT-I-PAK B-SERIES Instrucciones de funcionamiento originales

Friedrich

Friedrich MWM36Y3J Manual de usuario

Friedrich

Friedrich Kuhl SS08M10 Manual de usuario

Friedrich

Friedrich SV08A10A Instrucciones de construcción

Friedrich

Friedrich QuietMaster SS14 Manual de usuario

Friedrich

Friedrich CP10 Guía

Friedrich

Friedrich P/N9368987060-01 Manual de usuario

Friedrich

Friedrich QuietMaster Manual de usuario

Friedrich

Friedrich Chill CP18 Manual de usuario

Friedrich

Friedrich Chill Premier Series Manual de usuario

Friedrich

Friedrich SG series Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

Soleus Air

Soleus Air GB-PAC-08E4 Manual de usuario

McQuay

McQuay MCK020A Manual de usuario