Fresenius Kabi Amika Manual de usuario

Amika®is a registered trademark of Fresenius Kabi AG.

Fresenius Kabi Ltd is an authorised user © Fresenius Kabi Ltd.

Fresenius Kabi Limited,

Cestrian Court, Eastgate Way,

Manor Park, Runcorn,

Cheshire WA7 1NT

tel: 01928 533533 fax: 01928 533520

email: [email protected]

www.fresenius-kabi.com/gb

Date of preparation: March 2018 EN01046

Amika®

ENTERAL NUTRITION PUMP

PICTORIAL REFERENCE GUIDE

Empty battery

Connect pump to

mains supply

immediately.

Pump error alarm

Note the technical

Error code (Err xyz)

and contact your

biomedical

department.

Empty bag/ air in

set alarm

Change container

and set or check for

air bubbles.

Door open alarm

Close pump door.

Ta rget volume

almost reached

message

Continue feeding

or end feeding.

Ta rget volume

reached alarm

End feeding.

Downstream

occlusion alarm

Check that pump

set / feeding tube is

clear after the

pump, at patient

side.

Upstream

occlusion alarm

Check that pump

set is clear between

the container and

the pump.

Set installation alarm

Check set position

above and below

pump mechanism

and insert it correctly.

Mute alarm (if necessary)

Detect the cause and proceed to the appropriate action

Release alarm Resume feeding

If alarm occurs: Start Reminder

Proceed to next step

or switch pump off.

What to do if...

24535 Fresenius Amika EN01046.indd 1-2 08/03/2018 08:53

ENTERAL NUTRITION PUMP PICTORIAL REFERENCE GUIDE

Close the pinch clamp on the giving set and then

connect to the EasyBag or container.

Open the pump door.

Turn the Amika® pump on – pressing

the on/off button.

Place the giving set pinch clamp in line with

the downward arrow until it “clicks” in place.

Press the automatic priming key, and then

press the start button.

Place the giving set tube

straight inside the tube guide.

Set the desired ﬂow rate by

pressing the +/- keys until the

desired volume is reached.

When priming is complete,

press the start button again.

To stop feeding at any point,

press the stop key. When

feeding has ﬁnished or your

target volume is reached, press

the stop key.

If you need to reset the

progress bar after target

volume is reached, press the

stop key for 2-3 seconds.

To switch off the pump

press the on/off button

until the countdown is

completed.

Press the start key to

start feeding.

Set the target volume by

pressing the +/- keys until the

desired volume is reached.

Close the door, push down the

lever to lock it ﬁrmly in place.

01 02

0908

11 12 13

24535 Fresenius Amika EN01046.indd 3-4 08/03/2018 08:53

Otros manuales para Amika

Otros manuales de Bomba de agua de Fresenius Kabi

Fresenius Kabi

Fresenius Kabi Agilia VP Manual de usuario

Fresenius Kabi

Fresenius Kabi Agilia SP Manual de usuario

Fresenius Kabi

Fresenius Kabi Ambix nova Manual de usuario

Fresenius Kabi

Fresenius Kabi Amika Manual de usuario

Fresenius Kabi

Fresenius Kabi Agilia SP TIVA Manual de usuario

Fresenius Kabi

Fresenius Kabi Amika Manual de usuario

Fresenius Kabi

Fresenius Kabi APPLIX SMART Manual de usuario

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario