FoxESS SMART GPRS 2.0 Manual de usuario
SMART GPRS 2.0
Quick Installation Guide
This guide describes how to install the SMART GPRS & APP. Including APP
download, register an account, create PV plant. In order to prevent
improper operation before use, please carefully read this manual.
SMART GPRS 2.0
１
Step 1 :
Use a screwdriver to open
the Smart GPRS.
GPRS Stick Installation
1
Note:
*Please check from the side of the slot to
make sure the SIM Card core has sufficient
contact with the card slot.
Step 2 :
Slide cover to the left to unlock
and open;
Insert the card into the slot
(Make sure the core face is down);
Close the cover;
Slide cover to the right side to
close.
SMART GPRS 2.0
２
*Please make sure the cover has been slided
properly, otherwise the signal might be
reduced.
Step 3 :
Insert the Smart GPRS
board into the shell.
Step 4 :
Insert the SMART GPRS into the inverter
Wifi/GPRS interface and tighten the dongle.
Note:
*The device must be away from strong
SMART GPRS 2.0
３
magnetic fields generated by large electrical
equipment, such as microwaves stoves,
refrigerators, wireless phones, photovoltaic
panels and metal walls to ensure
communication quality. Communication
quality might be affected by lightning.
Scan the QR Code below to download and
install the FoxCloud App on your smart phone.
App Installation
1
2
SMART GPRS 2.0
４
For Smartphone Users:
Please choose from below operator：
- Vodafone
- Tata
- Aircel
- Airtel
Step 1 :
Please click ‘Register’, enter installer ’s
information and click‘Register’to complete
the installer account registration.
Sign Up For An Installer
account
1
3
SMART GPRS 2.0
５
Note:
*If you already have an installer/agent
account, please press login and enter with
your installer/agent account directly.
*If you are end user, please contact your
installer for following steps.
Step 2 :
Select your installer and enter the invitation
code, and click ‘Join’.
SMART GPRS 2.0
６
For Computer Users:
Note:
*Installer: the installation company
Agent: the agent/distributor company
installation company purchase from
SMART GPRS 2.0
７
Step 1 :
Input ‘foxesscloud.com’on the address bar
at the top of the click ‘Sign up’.
Note:
*If you already have an installer/agent
account, please press ‘Sign in’and enter
with your installer/agent account directly.
Step 2 :
Enter information and click ‘Sign up’to
complete account registration.
SMART GPRS 2.0
８
Note:
*If you are end user, please contact your
installer for following steps.
Step 3 :
Please select installer and enter the invitation
code, and click ‘Register’.
SMART GPRS 2.0
９
For Smartphone Users:
Step 1 :
Open the App, and login with
your Installer/agent account.
Create A Plant
4
SMART GPRS 2.0
１０
Step 2 :
Press the ‘+’icon on the homepage to add
plant. Press the scan icon next to the ‘Device’
list to scan the QR code label on the side of
the SMART GPRS. Some basic information for
this plant will populate automatically.
Complete all required information and click
‘OK’on the top right corner of the page.
Note:
*After starting the APP, it will pop-up an
message ‘whether to allow positioning
permissions’, please select ‘Allow’. For the
Capacity, please fill in the actual capacity of
the installed Solar Panels.
SMART GPRS 2.0
１１
For Computer Users:
Press the ‘New’
on the homepage to add plant.
Complete all required information and click
‘Create’.
SMART GPRS 2.0
１２
Mobile Interface
Computer Interface
App Introduction
1
5
SMART GPRS 2.0
１３
For Smartphone Users:
Step 1 :
Please click ‘Register’, enter end user’s
information and click‘Register’to complete
the end user account registration.
7
End User Account Registration And Sign Up
1
6
SMART GPRS 2.0
１４
For Computer Users:
Step 2 :
Select end user then scan the GPRS bar code
on the SMART GPRS, and click OK.
Please select end user then input the SN , and
click ‘Register’.
89
SMART GPRS 2.0
１５
Otros manuales de Módulo GSM/GPRS de FoxESS
