Foscam Huntvision Manual de usuario
For more detailed instrucons, please visit
foscam.com/downloads.
For more specific assistance, please feel free
to drop us an E-mail at: [email protected]
User Manual
Contents
P1
P1
P1
P2
P3
P3
P3
P4
P6
P7
1. Descripon
1.1 Package Contents
1.2 Physical Descripon
1.2.1 Front Panel
1.2.2 Rear Panel
1.2.3 Indicator Light Status
1.3 Key Features
2. Inial Installaons
2.1 Setup by Foscam App
2.2 Setup by a Web Browser
2.2.1 Hardware Installaon
2.2.2 Connect to Camera
3. Access to Your Camera
3.1 Access from a Web Browser
3.1.1 Access from Local Area Network
3.1.2 Basic Sengs for Remote Access
● Port Forwarding Seng
● Stac IP Address Seng
P1
P2
P3
P4
P6
P7
P7
P9
P9
P9
P12
P12
P12
P15
P15
P15
P17
P17
P18
P18
P18
P19
P20
P20
P20
P22
P23
P23
P26
P28
3.1.3 Remote Access Methods
● WAN IP Access Seng
● DDNS Access Seng
3.2 Access from Foscam App
3.2.1 Local Area Network Access
3.2.2 Remote Access
3.3 Other Access Method
4. Features and Sengs
4.1 WiFi Configuraon
4.2 Storage
4.2.1 SD Card
4.2.2 FTP
4.2.3 Foscam Cloud
4.2.4 Foscam NVR Products
4.2.5 Device Local Storage
4.3 Mail Sengs
4.4 Detecon Setup
4.4.1 Moon Detecon
4.4.2 Sound Detecon
4.5 Other Sengs
4.5.1 Sengs in Foscam App
4.5.2 Sengs in a Web Browser
5. FAQ
P10
1
1. Descripon
1.1 Package Contents
1.2.1 Front Panel
1.2 Physical Descripon
WPS/Reset
Micro SD
Card Slot
Microphone
Infrared LED
Lens
Quick Start Guide
User Manual
Power Adapter
Mounng Bracket
IP Camera
WiFi Antenna Ethernet Cable Expansion Screws
Please verify all contents received are complete according to the Package Contents listed below.
● Lens: Fixed focus lens
● Infrared LED: Infrared LEDs for night vision
● Microphone: Built-in microphone
● Micro SD Card slot: Supports up to 128GB SD card for storing the video
● WPS/Reset
WPS: Push both WPS/Reset buon on the camera and wireless router
about 3 seconds, the camera will connect to the wireless router
automacally, in WPS process, the Network light will flash every 0.4
seconds;
Reset: Push and hold the WPS/Reset buon unl a voice prompt,
‘Reset Succeeded’, to set the camera to factory default, the Power light
will flash every 0.4 seconds.
2
LAN
Power
Network light
Power light
Antenna
Loud Speaker
● LAN: 10/100 Mbps RJ-45 port for wired connecon
● Power: DC 5V/2A power supply
● Speaker: Built-in speaker
● Antenna: Used to connect external wireless antenna
Power Light
Light
Network Light
OFF
Flashing Status Descripon
ON
The power doesn’t work properly
The power supply works fine
Flashing every 0.4 seconds Reset takes effects
OFF No network connecon
ON Wired connecon
Slow Flash every 1.0 Second WiFi connected
Flashing every 0.4 seconds WPS is connecng
Flashing every 0.2 seconds EZ-Link takes effect
1.2.2 Rear Panel
The flashing status of the power light and Network light are shown in the following table.
1.2.3 Indicator Light Status
3
1.3 Key Features
●App Management
●Standard H.264
●P2P Easy Access
●2MP (P2) / 4MP (P4)
●WEP, WPA-PSK and
WPA2-PSK Encrypon
●Wireless Connecon
(IEEE 802.11b/g/n WI-FI,
up to 150Mbps)
●IR Range up to 8m (26)
●IR-Cut Auto Switch
●Embedded Free Foscam DDNS
Service
●Third-Party Domain Name Service
●Two-way Audio
●ONVIF Protocols
●Mul-level User Management
with Password Protecon
●Moon/Sound Detecon
●Image Snapshot
●Dual-stream
●Micro SD Card Storage
up to 128GB
●Voice Prompt
●FTP Storage
●Record Schedule
●Wide Dynamic Range
●Magic Zoom (P4)
●Pan & Tilt Control (horizontal
350°, vercal 100°)
2. Inial Installaon
You will need to set up the camera to make sure all the features work normally. Huntvision product provides
several methods for the inial installaon. Please choose the most convenient method for you.
You can download Foscam App for your smartphone from APP Store or Google Play Store so that you can
easily set up and manage your Huntvision products. For detailed instrucon, please check the Quick Start
Guide.
You can also use a web browser to set up your camera on your computer. Huntvision products support
IE/Firefox/Google/Safari browser. Please read the following instrucons carefully for a successful inial setup.
NOTE: We recommand the IE web browser for full features and sengs.
2.1 Setup by Foscam App
2.2 Setup by a Web Browser
4
2.2.1 Hardware Installaon
3
Mount the antenna and make it stand vercally.
Connect the camera to the LAN network (Router
or Switch) via an Ethernet cable.
Connect the power adapter to the camera, and
wait for a few moments unl camera boots with
an automaca rotaon and a voice promot,
‘Wired connecon succeed’.
2.2.2 Connect to camera
Equipment Search Tool
Camera Name
P2 Hp://192.168.**.**:88 ************ IPC
IP Address Device ID Type
Visit Foscam official website ‘foscam.com/tools’, then
you can find the ‘Equipment Search Tool’; Download
it to your computer.
Open the Equipment Search Tool, and you will find
your camera in the device list if your camera and your
computer are connected to the same network.
Double click your camera, and your web browser
will be opened to the camera login page.
NOTE: If your computer runs the Windows OS, please
set the IE web browser as your default browser, or you
can copy the web address to this login page and open
it on your IE web browser.
5
Donwload and install the plugins for your browser
(IPWebComponents.exe).
NOTE: During the plugins installaon, your browser will
be required to close, and aer installaon completed,
you will need to double click the camera in the search
tool list again.
Now you can log in your camera, the default
username is admin, and there is no password;
aer entering the default username, click Login.
NOTE: Aer you login the camera, you will be required
to change the username and the password for your
camera; Aer midifying, you can log into your camera
with this new username and password.
Aer login, there will be a Setup Wizard, which
will guide you to complete the camera setup.
NOTE: If you don’t want to do these sengs at this
moment, you can just click ‘ Next ’ to skip, and you can
update all of this sengs later in the camera system.
6
● Now you have logged in the camera system!
P2
3.1 Access to Camera via a Web Browser
3. Access to Camera
Aer you finished the inial installaon for your camera, you can login your camera for your daily use and
sengs.
*If you want to access to your camera via a local area network (LAN), please make sure your App or computer and your
camera are connected to the same network;
*If you want to access to your camera remotely, please make sure your camera has been connected to the Internet;
*If you don’t want to connect your camera with an Ethernet cable, please make sure that you have completed the WiFi
configuraon for your camera.
It is easy for you to access to camera by using a web browser; Before accessing to your camera, please check if
your camera is connected to a local area network or the Internet.
7
3.1.1 Access to Camera in a Local Area Network
Equipment Search Tool
Camera Name
P2 Hp://192.168.**.**:88 ************ IPC
IP Address Device ID Type
Double click your camera in the device list and your
default web browser will be opened automacaly to
the camera login page.
3.1.2 Basic Sengs for Remote Access
Log into your router to check the LAN IP your router assign to your camera.
By using the Equipment Search Tool, you can have a quick and easy access to your camera.
Please check Page 4 in this User Manual for the method of
downloading the Equipment Search Tool.
You can also just type in the IP Address in your web browser to open the camera login page, our camera
supports HTTP and HTTPS protocol.
●hp://LAN IP:HTTP Port No. ( The default HTTP Port No. is 88 ); For example: hp://192.168.**.**:88
●hps://LAN IP:HTTPS Port No. ( The default HTTP Port No. is 443 ); For example: hps://192.168.**.**:443
Before having the remote access to our camera, you need to complete the Port Forwarding and Stac IP
Address Sengs for both these two remote access methods.
● Port Forwarding Sengs
* This seng is on your router system, not in the camera. Here we will use a regular WiFi Router as an
example, and the router sengs descripon will be slightly different on different routers.
Tabla de contenidos
Otros manuales de Cámara IP de Foscam
Foscam
Foscam FI8905W Manual de usuario
Foscam
Foscam E1 Manual de usuario
Foscam
Foscam FI9803EP Manual de usuario
Foscam
Foscam R2 Manual de usuario
Foscam
Foscam FI8903W Manual de usuario
Foscam
Foscam FI9804W Manual de usuario
Foscam
Foscam FI9803P Manual de usuario
Foscam
Foscam FI8908W Manual de usuario
Foscam
Foscam FI9820W Manual de usuario
Foscam
Foscam R2 Manual de usuario
Foscam
Foscam FI9803P Manual de usuario
Foscam
Foscam FI8903W Manual de usuario
Foscam
Foscam FI8906W Manual de usuario
Foscam
Foscam FI8903W Manual de usuario
Foscam
Foscam FI9821P Manual de usuario
Foscam
Foscam FI9820W Manual de usuario
Foscam
Foscam FI8904W Manual de usuario
Foscam
Foscam FI8918W Manual de usuario
Foscam
Foscam FI9821EP Manual de usuario
Foscam
Foscam FI9803P Manual de usuario
