Foscam 305503000664 Manual de usuario
Video Doorbell
V1.2
305503000664
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
The user manual for the product contains the product functions, method of use and
operating procedure. Read the user manual carefully to get the best experience and
avoid unnecessary damage. Keep the manual for future reference.
WARNING
Do not use the product in violation of local laws and regulations. A user who violates
local laws and ordinances will be held responsible for all consequences of purchasing
and using the product.
Alza.cz a.s. is not responsible for any violation of local laws and regulations by the user.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
What is in the Box
2. Physical Description
Front Panel
Light sensor
1 x Mounting bracket
Doorbell button
Camera
Microphone
1 x Video Doorbell
1 x Power Kit
1 x Silicone Plug
1 x 5°Vertical angle bracket
1 x Thick mounting bracket
2 x Wire Extenders
2 x Wire Nuts
1 x Drill Hole
Position Template
1 x Quick Setup Guide
1 x 15°Horizontal angle
bracket
1 x Type-C cable
1 x Dual-purpose
screwdriver
1 x Expansion Screws
4
Rear Panel
Bottom Panel
Add device: Connection via Foscam App (Recommended)
It is strongly recommended that you complete the “add devices” process on the Foscam
app before the doorbell hardware is installed.
Before you get started
Scan the QR code below to download and install the Foscam APP; and learn how to add
the doorbell to the APP:
Download the APP APP add doorbell instruction video
To ensure a smoother video experience on your smart phone, it is recommended that
you smart phone meet the following specifications:
•iOS: version 11 or higher.
•Android: 4.1 or higher, using a device with Graphics Processing Unit (GPU)
NOTE: For the best experience, please update the APP to the latest version!
Speaker
Reset
Mounting
Slot
Micro SD Card Slot
Power Input Port
Type-C Port
Security screw hole
5
Wi-Fi connection
1. Plug the smaller end of the USB cable into the Type-C port on the back of the Video
Doorbell, and the larger end into a USB wall charger such as your smart phone charger
(DC5V 1.0A power output recommended for faster charging). Please wait for a few
seconds until you hear “Ready for Wi-Fi configuration”.
Please note that it is forbidden to connect the doorbell to AC and Type-C supply at
the same time.
TIPS: If you did not hear the voice prompt, press and hold reset for about 10 seconds to
reset the camera.
2. Make sure that your smart phone is connected to your Wi-Fi router.
TIPS: The camera supports dual-band 2.4GHz and 5GHz Wi-Fi networks, so you can
choose the channel with the stronger signal to use. For example SSID: XXXXX_2.4G or
XXXXX_5G.
3. Open the foscam APP and please register a Foscam account, or sign in if you have one
already.
4. After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the upper
right corner, then select “Scan the QR code” and scan the QR code that labeled at the
bottom of your camera.
Tap + icon select “Scan the code” Scan the QR code
which is located at the
bottom of your camera.
6
5. In “Add Device”, if you hear “Hello Foscam”, select the checkbox and tap “Next”,
continue to confirm that the device is in the blue flashing state and tap “Next”. In “Wi-Fi
connection”, enters your Wi-Fi’s password and tap “Confirm”.
6. Please scan the QR code on the doorbell with the smart phone camera, then you will
hear a voice prompt say “Wi-Fi connecting”. Select the checkbox and tap “Next”.
TIPS: Please place the QR code on the phone screen about 10-15cm (3.94 to 5.9in) away,
and if you encounter difficulties you can try to move the screen slowly around 10-15cm
(3.94 to 5.9in).
7. Wait a few seconds until the camera notifies you that the “Wireless connection
succeeded” which means your camera has connected to your Wi-Fi successfully. After,
you can set the camera name and tap “Save” in “Set name” interface.
Heard „Hello Focam!
And tap „Next“
Confirm device
flashes blue
Enter you Wi-Fi
password and tap
„Confirm“
Camera added
successfully and
name has been set
Confirm device white
light flashes
7
NOTE: If the adding process fails, please reset your camera and try adding according to
the above method.
Reset
8. In “Select Chime Type”, tap “Select Chime Type”, and tap “Next”. In “Select Chime
Type”, select Chime type and tap “Mechanical chime” or “Digital chime” or “None” (Please
select the type of your existing chime).
Tap Select Chime Type Select the type of your existing chime
NOTE: Please carefully confirm the existing chime type in your home. If the chime type is
selected incorrectly, the transformer and chime at home will be damaged, causing the
doorbell and chime to not work properly. Generally, a mechanical chime refers to the
ringing sound made by striking a metal with a metal striker, while digital chime refers to
the ringing sound made by playing music through a speaker.
If you are still not sure, please watch the chime type description video carefully, or
consult our customer service staff.
8
9. Tapping on the play button in the video box will jump to the “Camera Login” setting
interface. For your security, please set a new username and password for your camera
before viewing live video.
Tap Set a new username
and password
10. After completing the above steps, you can begin installing your camera.
Video Doorbell Installation
NOTE:
•Make sure you have installed the Foscam APP, and have scanned the doorbell QR
code and completed the “add device” process in the app before beginning the
hardware installation process.
•If you choose to use AC power the video doorbell, you need to ensure that the
specification of the transformer in your home is 8V~24V AC, the minimum power
requirement is 8VA.
•If you use DC power to power the video doorbell, you need to prepare a DC
12V~30V power adapter, the minimum power requirement is 6W.
•If you use Type-C interface to power the video doorbell, you need to prepare a
DC5/15A power adapter, the minimum power requirement is 5W.
STEP 1
Ring the existing doorbell, make sure it is working and locate the place of your existing
chimes in the house.
9
STEP 2
Shut off the master circuit breaker in your house. Turn the lights in your home on / off
to make sure the electricity in your house is properly shut off.
If you are comfortable doing it yourself, consult a qualified electrician.
STEP 3
Indoor chimes are generally of two types: mechanical, or digital. If you need to use the
existing mechanical chime or digital chime in your home, please install the Power Kit in
parallel to the chime. Power Kit is generally used to solve the problem of abnormal
ringing of the chime after the video doorbell replaces the traditional doorbell buttons.
How to distinguish between Digital Chime and mechanical Chime, please scan the
following QR code to view.
What is required: Dual-purpose screwdriver
10
After removing the cover of the mechanical chime or digital chime, use the wire
connection terminal with the Power Kit as pictured. After wiring is completed, replace
the cover.
Bypass Model:
If you do not want to use the existing chime, you can switch the cable on the Power kit
to the bypass interface, and then connect it in parallel to the existing chime This will
short-circuit the chime at our home. You can choose to add Wi-Fi chime, realize the
function of chime. If you choose to use the Power Kit by pass mode, be sure to set the
chime type to “None” in you APP to avoid damaging the transformer.
You can scan the QR code below to search and watch the power kit installation video.
Remove the cover
Replace the cover
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios de Foscam
