fos4X fos4Strain patch Manual de usuario
INSTRUCTIONS FOR USE
fos4Strain patch
(2m, 1553nm, E-2
green)
SEN1374
Product Type Sensor
Product Version 1.2.x
Document Version 2.1
Issue Date 2020-02-24
Language en-us
Fo ow these instructions for safe and proper use. Keep instructions for future use.
INSTRUCTIONS FOR USE
fos4Strain patch
(2m, 1553nm, E-2
green)
SEN1374
Product Type Sensor
Product Version 1.2.x
Document Version 2.1
Issue Date 2020-02-24
Language en-us
Fo ow these instructions for safe and proper use. Keep instructions for future use.
Imprint
Imprint
fos4X GmbH
Tha kirchner Str. 210
81371 Munich
Germany
Phone: +49 89 999542-00
Fax: +49 89 999542-01
www.fos4X.de
WEEE-Reg.-Nr. DE: 70390148
©2020 fos4X®
Distribution and reproduction of this document, exp oitation and communication
of its contents are prohibited un ess express y permitted. Vio ations wi resu t in the
iabi ity for damages. A rights reserved in the event of patent, uti ity mode or design
registration.
A rights reserved.
fos4X is a trademark of fos4X GmbH.
Brand names and protected trademarks are the property of their respective owners.
The naming of brand names and protected trademarks has on y descriptive character.
Named trademarks are not part of any partnership or cooperation with fos4X.
2 / 35 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us © fos4X 2020
Tab e of Contents
Table of Contents
1 About this Document......................................................................................... 5
1.1 Target Audience..................................................................................................... 5
1.2 Objective of these Operating Instructions.................................................... 5
1.3 Identification of Information............................................................................. 5
1.3.1 Safety-re evant Information................................................................. 5
1.3.2 Non-safety-re ated Information..........................................................6
1.4 Abbreviations.......................................................................................................... 6
2 Safety.....................................................................................................................7
2.1 Changes to the Product...................................................................................... 7
2.2 Qua ification of Personne .................................................................................. 7
2.3 Intended Use........................................................................................................... 8
2.4 Residua Risks......................................................................................................... 8
2.4.1 Exp osion Protection................................................................................8
2.4.2 Working Environment B ade Manufacturing Faci ity....................8
2.4.3 Working Environment Wind Turbine...................................................8
2.4.4 Adhesives..................................................................................................... 9
2.5 Persona Protective Equipment........................................................................ 9
3 Product Descri tion........................................................................................... 11
3.1 Functiona Description........................................................................................ 11
3.1.1 Function.......................................................................................................11
3.1.2 Overview......................................................................................................11
3.1.3 Operation....................................................................................................12
3.1.4 Ca cu ation of strain............................................................................... 13
3.2 Technica Data.......................................................................................................13
3.2.1 Sensor Data...............................................................................................13
3.2.2 Optica Data..............................................................................................14
3.2.3 Cab e Data................................................................................................. 14
3.2.4 Mechanica Data..................................................................................... 14
© fos4X 2020 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us 3 / 35
Tab e of Contents
3.2.5 Environmenta Conditions.................................................................... 15
3.2.6 Dimensions................................................................................................ 16
3.3 Markings on the Product.................................................................................. 17
3.3.1 Type P ate...................................................................................................17
4 Packaging and Trans ort.................................................................................18
4.1 Scope of De ivery.................................................................................................18
4.2 Unpacking...............................................................................................................18
4.3 Packing....................................................................................................................18
4.4 Transport................................................................................................................ 19
4.5 Storage.................................................................................................................... 19
5 Installation..........................................................................................................20
5.1 Important Safety Notes for Insta ation......................................................20
5.2 Preparing the Insta ation Position.................................................................21
5.3 Attaching the Sensor......................................................................................... 23
5.4 Attaching the Cab e............................................................................................26
5.5 Connecting E-2000/APC Connections........................................................ 27
6 Commissioning and O eration....................................................................... 29
7 Troubleshooting................................................................................................ 30
8 Maintenance....................................................................................................... 31
8.1 Preventive Maintenance....................................................................................31
8.2 Corrective Maintenance.....................................................................................31
8.2.1 C eaning E-2000/APC Connections..................................................31
8.3 fos4X Support.......................................................................................................32
9 Taking out of Service and Dis osal............................................................... 33
9.1 Taking out of Service......................................................................................... 33
9.2 Disassemb y.......................................................................................................... 34
9.3 Disposa .................................................................................................................. 34
4 / 35 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us © fos4X 2020
1. About this Document
1 About this Document
1.1 Target Audience
These instructions for use are intended for technica y trained personne .
1.2 Objective of these Operating Instructions
These instructions for use describe a tasks for the intended use of the product.
1.3 Identification of Information
1.3.1 Safety-relevant Information
These o erating instructions contain the following safety information:
■Safety information in the Safety chapter app ies to the entire use of the product.
See Safety, page 7.
■Safety notes at the beginning of a section app y to the entire section.
■Safety notes before a step app y to the entire fo owing section.
Safety notes are shown in the operating instructions as fo ows:
DANGER Nature and cause of risk
Consequences
uMeasures to avoid the risk.
The safety notes with the signa words Caution and Notice have the fo owing
meanings:
CAUTION Risk which, if not avoided, cou d resu t in minor injury.
NOTICE Risk which, if not avoided, wi resu t in damage to property.
© fos4X 2020 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us 5 / 35
1. About this Document
1.3.2 Non-safety-related Information
TIP Advice on the optima use of the product.
Symbols and Meaning
Tab e 1: Representation of the information in the operating instructions
Symbol Meaning
Task:
1. First step
2. Second step
Instruction with task and severa steps
Task:
uStep Instruction with a sing e step
PResu t Resu t of an instruction
List:
■Point 1
■Point 2
Enumeration with tit e
Identification of Information,
page Cross reference
Bold Text High ighting of particu ar y important information
1.4 Abbreviations
GRP G ass-fibre reinforced p astic
GTIN G oba Trade Item Number
IP Internationa Protection
Max Maximum
Min Minimum
OECD Opto-E ectronic Converter Device
SMF Sing e Mode Fiber
6 / 35 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us © fos4X 2020
2. Safety
2 Safety
2.1 Changes to the Product
Changes to the product may on y be carried out by fos4X.
2.2 Qualification of Personnel
Definitions
■Instructed ersonnel: Personne instructed in the tasks assigned to them.
■Trained ersonnel: Personne trained in the operation and safe use of the
product.
■Qualified ersonnel: Personne who, based on their specia ist training, know edge
and experience and know edge of the re evant regu ations, are ab e to assess the
work assigned to them and identify possib e hazards.
Assignment of tasks
Tasks within the scope of use may on y be carried out by the personne defined be ow.
Tab e 2: Tasks
Task Personnel
Packaging and Transport Instructed personne
Insta ation
Commissioning
Operation
Trained personne
Troub eshooting Qua ified personne
Maintenance
Taking out of Service Trained personne
Disassemb y
Disposa
fos4X or specia ized disposa
company
© fos4X 2020 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us 7 / 35
2. Safety
2.3 Intended Use
The fos4Strain patch is a fiber-optica strain sensor based on a fiber Bragg grating.
The sensor is designed for strain monitoring of various structures, for examp e GRP,
meta and concrete.
Any use other than described in these operating instructions is considered improper
use.
The product is on y suitab e for use in an industria environment.
2.4 Residual Risks
2.4.1 Explosion Protection
The product is not suitab e for use in potentia y exp osive environments.
2.4.2 Working Environment Blade Manufacturing Facility
The use of the product in b ade manufacturing faci ities requires specia risk prevention
measures.
Risk revention measures in blade manufacturing facilities:
uObtain and observe safety and work regu ations:
– Qua ification and training of personne
– Persona protective equipment
– Required permits
uEnsure that the use of the product is permitted on the wind turbine.
2.4.3 Working Environment Wind Turbine
The use of the product in wind turbines requires specia risk prevention measures.
8 / 35 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us © fos4X 2020
2. Safety
Measures for risk revention on wind turbines:
uObtain and observe safety and work regu ations:
– Qua ification and training of personne
– Persona protective equipment
– Required permits
uEnsure that the use of the product is permitted on the wind turbine.
2.4.4 Adhesives
Adhesives can cause severe irritation and allergic skin reactions.
uAvoid skin contact.
uObserve the safety data sheet of the adhesive.
uUse persona protective equipment according to the safety data sheet of the
adhesive. See Personal Protective Equipment, page 9.
Fumes from adhesives can cause damage to health and allergic reactions.
uDo not inha e fumes.
uObserve the safety data sheet of the adhesive.
uUse adhesives on y in sufficient y venti ated rooms.
Adhesives can cause severe environmental damage.
uObserve the safety data sheet of the adhesive.
uDispose of adhesives and adhesive packaging in accordance with app icab e
environmenta regu ations.
2.5 Personal Protective Equipment
Protective Gloves
For all tasks where surfaces are heated:
uWear protective g oves with the fo owing characteristics:
– Genera requirements according to DIN EN 420
– Protection against contact heat: Performance eve 2 according
to DIN EN 407
© fos4X 2020 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us 9 / 35
2. Safety
For all tasks with adhesives:
uWear protective g oves according to EN ISO 374-1 (nitri e, min.
0.4 mm).
For all tasks with ergo. 1665:
uWear protective g oves according to EN ISO 374-1 (buty , min.
0.5 mm).
Safety Goggles
For all tasks with adhesives:
uWear safety gogg es with side protection according to DIN EN 166.
When grinding GRP:
uWear safety gogg es with side protection according to DIN EN 166.
Protective Clothing
For all tasks:
uWear protective c othing ( ong-s eeved work c othing).
Respiratory Protection
When grinding GRP:
uWear respiratory protection with protection eve A2 P2 according to
DIN EN 140.
For all tasks with ergo. 1665:
uIn case of insufficient venti ation: Wear respiratory protection with
protection eve A P2 according to DIN EN 140.
10 / 35 SEN1374_4-10_1.2.x_2.1_fos4Strain
patch_(2m, 1553nm, E-2000 green)-en-us © fos4X 2020
Tabla de contenidos
Otros manuales de Accesorios de fos4X
