FOS Technologies Luminus Manual de usuario

FOS Luminus

PRODUCT SPECIFICATIONS

TECHNICAL SPECIFICATION

Voltage: 100/240 Volt AC, 50/60 Hz.

Light Source: 6x 10 Watt 6 in 1 LEDs (RGBWAUV).

Beam Angle: 25°.

Control: DMX512, stand alone, WiFi.

DMX Channels: 6 & 10 control channels.

Protection Class: IP20 (suitable for indoor use only)

Battery: Lithium with 8 hours operation in full ON

Width: 135 mm

Depth: 135 mm

Height: 198 mm

Weight: 2,5 Kg

SAFETY WARNING

This product must be installed by a qualified professional. All maintenance must be carried

out by a qualified electrician. A minimum distance of 0.5 m must be maintained between the

equipment and a combustible surface. The product must always be operated in a well-

ventilated area. DO NOT stare directly into the light source. Always disconnect the power

before carrying out any maintenance. The earth must always be connected to the ground. Ensure that all

parts of the equipment are kept clean and free of dust.

PROTECTION AGAINST SOLIDS AND

WATER

Only for IP-rated fixtures

The protection level of a housing is set by applied standards. For classification there is used the IP-Code.

It contains the declaration „IP“and two following numbers. The first number characterizes the protection

against harmful effects of solids, the second is rating the water protection. It is important to distinguish

whether encapsulation and harmful effect! There can be housing that is not capsuled completely but still

avoids harmful effect of solids or water.

PROTECTION EXAMPLES:

IP20: Protection against intruding objects >12,5mm „Finger protected “; No waterproofing. TYPICAL

PROTECTION FOR INDOOR USE FIXTURES

IP33: Protection against intruding objects >2,5mm; Falling water within an angle of 60° has no harmful

effect TYPICAL PROTECTION OF LED-LIGHTS USING RECESSED POWERCON AND DMX SOCKET. This

protection is linked to the mounting position of the fixture and always refers to typical mounting situation

like a Floor spot used standing on the ground.

IP54: complete protection against solids and low-pressure water from any side THIS TYPE OF FIXTURES

CAN BE USED UNDER NORMAL OUTDOOR CONDITIONS.

IP65: shielded against dust and pressurized water from any side. TYPICAL PROTECTION FOR OUTDOOR

RATED EVENTFIXTURES USING WATERPROOFED POWER AND SIGNAL LINK.

IP67: shielded against dust and protected for accidental briefly submerge. PROTECTION AGAINST

ACCIDENTIAL SUBMERGING ON TEMPORARY FLOODED AREA.

TEMPORARY USE

Event equipment is designed for temporary use. This are typical purpose as concerts, festivals, theatre,

clubs and disco use and referable venues. Long-term use, specially under outdoor conditions and fixed

outdoor installation can bring damage in aging materials and affect the coated surface. Sealings as well as

cables are made from rubber material and will age by long-term UV-emission as sunlight and should be

checked frequently.

LIMITATIONS OF IP PROTECTION

IP-Rating doesn´t mean unlimited outdoor use and protection against any kind of environmental

influence! Especially sunlight and included UV will bring accelerated aging. Some fixtures need special

parts or processes to fit the rated IP-Protection, like mounting covers or caps or similar. Sealings and other

plastic or rubber materials are aging parts. They must be checked frequently to ensure the protection and

safety of the fixtures. Also specified torque of screws can affect protection!

Installation

Hanging: The fixture can be mounted in a hanging position using the supporting bracket. The bracket

should be secured to the mounting truss or structure using a standard mounting clamp. Please note that

when hanging the unit, a safety cable should also be used.

UPRIGHT: The fixture can be mounted in an upright or sitting position using the supporting brackets.

NOTE! If the signal cable is over 60 m between the DMX512 controller and fixture or between

two fixtures, then a DMX signal amplifier is needed as well.

Menu Screen

You can easily navigate through menu’s options with the four buttons under the screen. Navigating in the

menu is simple! With the Up / Down buttons, you are moving through menu’s choices, pressing Enter, you

are entering the sub menu of the option you have chosen, with the Up / Down buttons you’re moving

through the sub menu’s options, with Enter, you are confirming your choice. The FOS Battery WiFi offers

the following options:

DMX512: Set the DMX address.

Shows:

• Auto Color*

• Auto Fade*

• Auto Pulse*

• Auto Strobe*

• Wifi Mode: On / Off

* Press Enter and with Up & Down buttons adjust the speed of the mode.

Sound:

•Sound Mode 1

•Sound Mode 2

• Sound Mode 3

• Sound Mode 4

Press the Sound Mode of your choice and with the Up & Down buttons adjust the sound sensitivity.

Color:

• Custom Color: Create the color of the choice, easily via this menu.

• Static Color: Choose among 32 preprogrammed colors.

Set

• DMX Channel: 10 / 6

•2,4G Wireless: On / Off

• Infrared: On / Off

• Display backlight: Adjust the intensity of the LCD background light.

• LCD Close Time: Select among five options (Open, 5S, 10S, 15S, 30S)

• Fan Speed: Auto / Slow / Middle / Fast

• Restore Factory: Yes / No (Password 8888)

• Temperature: Activates ore Deactivates the temperature indication on the LCD screen.

• Battery: On / Off

• BackColor: Changes the background color of the LCD screen.

Help: Shows information on the selected channel mode, firmware version, operational time, temperature.

Channel Modes

6 Channel

1. Red

2. Green

3. Blue

4. White

5. Amber

6. Ultra Violet

Linear dimming from 0 – 100% in all the channels

10 Channels

1. Master Dimmer

2. Red

3. Green 4. Blue

5. White

6. Amber

7. Ultra Violet

8. Shutter

• 0 – 8 Shutter Open.

• 9 – 255 Gradual synched strobe from slow to fast.

9. Color Macros / Presets

• 0 – 8 Off

• 9 – 50 Static Color palette (In combination with channel 10)

• 51 – 100 Dynamic Color palette with adjustable speed*

• 101 – 150 Color Pulses with adjustable speed*

• 151 – 200 Color Fade with adjustable speed*

• 201 – 220 Color change in sound mode

• 221 – 240 Strobing color in sound mode

• 241 – 255 Color pulsing in sound mode

*speed adjusted with channel 10

10. Color macros speed

Control Via WiFi

Download the application LedHome to your mobile, available for Android & iOS.

On your Luminus, go to SET menu and activate the WiFi option (2.4g Wireless)

Then, go in the SHOWS menu and activate the WiFi mode.

On your mobile device, go to WiFi and find the network broadcasted by the Luminus projector.

The network name will be LED_*** (where the ***, will be a 3-digit number). Connect to this

network.

Start the LedHome application and start controlling your Luminus!

See our video presentation for details.

General Information

Replacing a fuse:

Always disconnect the fixture from main power before replacing a fuse. Use only the appropriate fuse,

with the same type and rating. A fuse with different rating, can damage the fixture in case of failure.

Risk of electric shock and / or fire:

The fixture must be earthed, supplied always with its nominal voltage and cleaned periodically from dust.

For cleaning use only, a moist cloth. Never use liquids or force water. After cleaning, let the fixture dry

before use.

Otros manuales para Luminus

Tabla de contenidos

Otros manuales de Equipo de iluminación de FOS Technologies

FOS Technologies

FOS Technologies FOS PAR 18x10W Pro Manual de usuario

FOS Technologies

FOS Technologies Arena Zoom Manual de usuario

FOS Technologies

FOS Technologies PAR 18x12WPRO RGBWA Manual de usuario

FOS Technologies

FOS Technologies COB PAR 200 Manual de usuario

FOS Technologies

FOS Technologies FOS PAR 7x10W ALU Manual de usuario

FOS Technologies

FOS Technologies FOS GLOW II Manual de usuario

FOS Technologies

FOS Technologies VINTAGE 7 Manual de usuario

FOS Technologies

FOS Technologies Tour PAR 150 Manual de usuario

FOS Technologies

FOS Technologies Pixel BladeUltra Manual de usuario

FOS Technologies

FOS Technologies PIXEL BAR 18 Manual de usuario

FOS Technologies

FOS Technologies L005613 Manual de usuario

FOS Technologies

FOS Technologies ATLAS Tube Manual de usuario

FOS Technologies

FOS Technologies Luminus Pole Manual de usuario

FOS Technologies

FOS Technologies PAR 18X10WPRO IP65 Manual de usuario

FOS Technologies

FOS Technologies CYCLONE PRO D2 Manual de usuario

FOS Technologies

FOS Technologies 17R Hybrid CMY Manual de usuario

FOS Technologies

FOS Technologies Bar Pente Manual de usuario

FOS Technologies

FOS Technologies PAR 18x10W Flat Manual de usuario

FOS Technologies

FOS Technologies Beam 230W Hybrid Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario