ENEN
•ATTENTION
yTo pull the rivet, the rotation speed of the drill must be lower
than 240 min-1 with the minimum torque specified above based
on the type of material and diameter of the rivet body. Alow
rotation speed is important for maintaining control of the tool.
Safety Instructions
yWork in awell lit work location.
yMaintain afirm stable work posture.
yKeep hands and all body parts in asafe place at asufficient dis-
tance from the work area.
yMake sure that there is no loosely hanging clothing, chains, long
hair, gloves, etc. in the vicinity of the work area since they could
be caught by the rivet.
yDo not use the rivet for fastening electrical cables because the
insulation on the wires could become damaged and life-threate-
ning voltage could be conducted to the metal parts of the tool,
which could lead to injury of the user by electrical shock.
Cleaning and maintenance
yRemove the rivet drill adapter from the drill before cleaning and
maintenance The rivet drill adapter is supplied factory lubricated.
Once per year or more often, disassemble the adapter and lubri-
cate it using industrial Vaseline.
yDo not use any organic solvents or corrosive cleaning products
for cleaning.
yFor warranty repairs of the product, please contact the vendor
from whom you purchased the product and they will organise
repairs at an authorised service centre for the Extol® brand. For
apost warranty repair, please contact the authorised service cen-
tre of the Extol® brand directly (you will find the repair locations
at the website at the start of this user's manual).
yFor safety reasons and for reason of exercising the warranty,
exclusively original parts of the manufacturer may be used for
repairs.
Storage
yStore the riveter in adry place, out of the reach of children.
Protect the riveter from rain and moisture.
Warranty and service
yFor warranty repairs of the product, please contact the vendor
from whom you purchased the product and they will organise
repairs at an authorised service centre for the Extol® brand. For
apost warranty repair, please contact the authorised service cen-
tre of the Extol® brand directly (you will find the repair locations
at the website at the start of this user's manual).
yThe product is covered by a2-year guarantee from the
date of sale according to law. If requested by the buyer,
the seller is obliged to provide the buyer with the
warranty conditions (rights relating to faulty performan-
ce) in written form.
yFree warranty repairs relate only to manufacturing defects on
the product (hidden and external) and do not relate to the wear
of the product as aresult of excessive load or normal use or dam-
age of the product caused by incorrect use.
yIn the event of adispute between the buyer and the vendor in
respect to the purchase contract that was not resolved directly
between the parties, the buyer has the right to the trade inspec-
tion authority for an out-of-court settlement of the aconsumer
dispute. At the website of the trade inspection authority there is
alink to the tab "ADR-amicable dispute resolution".
Technical drawing
M3
M4
M5 M6 M8 M10
Fig. 8
