Formosa MIMO WiTDM Series Manual de usuario
1
MIMO WiTDM
®
Series
KW50-O8500
User’s Manual
2017/11/02 v2
2
Copyright
There is no any clear or implicit assurance in the user's manual of our company, including the
assurance of selling or installing for the special purpose. There are rival's volumes to carry on the
power to alter or revise in our company, if alter and forgive me for not issuing a separate notice. You
can’t duplicate any content of this manual by the written permission of our company.
About this manual
The purpose to use this manual is for install the wireless Bridge. This manual is including
disposing course and method and helping the customer to solve the unpredictable problem.
The following typographical conventions are used in this purpose:
Notice:
This indicates an important Note.
Caution:
This indicates a warning or caution
Bold Type：Indicates the function, important words, and so on.
3
Index
CHAPTER 1 INTRODUCTION ............................................................................................................................................ 4
INTRODUCTION ....................................................................................................................................................................... 4
APPEARANCE OF PRODUCT ..................................................................................................................................................... 4
FEATURES AND BENEFITS ....................................................................................................................................................... 4
CHAPTER 2 HARDWARE INSTALLATION ..................................................................................................................... 5
SYSTEM REQUIREMENT .......................................................................................................................................................... 5
PRODUCE KIT ......................................................................................................................................................................... 5
HARDWARE INSTALLATION ..................................................................................................................................................... 5
LED DESCRIPTIONS ............................................................................................................................................................... 5
CHAPTER 3 SYSTEM SETUP .............................................................................................................................................. 6
FACTORY DEFAULT SETTINGS ................................................................................................................................................. 6
USING THE WEB MANAGEMENT ............................................................................................................................................. 7
STATUS ................................................................................................................................................................................... 8
MAP .................................................................................................................................................................................... 10
SYSTEM ................................................................................................................................................................................ 11
CHAPTER 4 WIRELESS SETTINGS ................................................................................................................................ 15
BASIC WIRELESS SETTINGS .................................................................................................................................................. 15
CHAPTER 5 MANAGEMENT ............................................................................................................................................ 19
CHANGE PASSWORD ............................................................................................................................................................. 19
UPGRADE FIRMWARE ........................................................................................................................................................... 21
BACKUP/RESTORE ................................................................................................................................................................ 22
EVENT LOG .......................................................................................................................................................................... 23
REBOOT ................................................................................................................................................................................ 23
CHAPTER 6 TROUBLESHOOTING ................................................................................................................................. 24
FAQ ..................................................................................................................................................................................... 24
SERVICE SUPPORT ................................................................................................................................................................ 25
4
Chapter 1 Introduction
Introduction
Thank you for choosing the Formosa’s KW50-O8500 Wireless Outdoor MIMO WiTDM Bridge. It is a PoE
power supply, waterproof, and dust-proof wireless bridge that is specially designed for connecting among
multiple network location. The KW50-O8500 work on 5GHz, and it based on powerful TDMA technology that
provides higher channel bandwidth for long distance connect.
Appearance of Product
KW50-O8500
Features and Benefits
Support Power over Ethernet (PoE)
IP68 class of enclosure
Support TDMA mechanism, to ensure quality for multi-media application
Easy to install and friendly to user, just plug and play.
Provides Web-based configuration utility.
5
Chapter 2 Hardware Installation
System Requirement
Installation of MIMO WiTDM® outdoor unit of KW50-O8500 system requirement:
Two PCs with automatic speed control NIC support the transfer rate of 10/100/1000 Mbps data.
The IP address of NIC should be the same subnet with the AP, the default IP address of AP is 192.168.1.1
Microsoft Internet Explorer 6 or above.
Produce Kit
KW50-O8500 x 1
Injector-GT3 (48V, 0.65A) x 1
Mounting Kit x 1
User’s Manual CD x1
Hardware Installation
The following steps will help you while installing MIMO WiTDM®.
LED Descriptions
LED Status Description
Power Green Power ON
STATUS Green Power on Flash 1 Sec , then OFF
Remote
RSSI Green
CPE：Go around while surveying ( not connect yet ),
Represent strength of RSSI after connected.
Low ( 1 LED ) → High ( 5 LEDs )
RST Push 5 seconds then release to reset device to default
LED Definition
6
Chapter 3 System Setup
Factory Default Settings
We’ll elaborate the KW50-O8500 factory default settings. You can re-acquire these parameters by default. If
necessary, please refer to the “Restore Factory Default Settings”.
Item Factory Default
Login Information
User Name admin
Password password
Basic Settings
Device Name DEVICExxxxxx (xxxxxx Represent the last 6
digitals of the MAC address)
Ethernet Data Rate Automatic
Spanning Tree Protocol Enable
VLAN (802.1Q) Disable
IP Settings
IP Type：Manual
IP Address：192.168.1.1
IP Subnet Mask：255.255.255.0
Default Gateway：0.0.0.0
Primary DNS Server：0.0.0.0
Secondary DNS Server: 0.0.0.0
Time Settings
Time Server: None
Time Sever Port: 123
Time Zone: (GMT-08:00)Pacific Time(US &
Canada);Tijuana
Wireless Setup
Radio Frequency (RF) Enable
Operation Mode Base Station
Network ID Wireless
Time Slot 10ms
RF Bandwidth 20MHz
Channel / Frequency 5060 MHz
Data Rate SS BPSK 1/2 – SS 64QAM 5/6 , SS BPSK 1/2 – DS
64QAM 5/6
Output Power Full
Default Settings
7
Using the Web Management
The KW50-O8500 provides you with user-friendly Web-based management tool.
Open IE and enter the default IP address (Default: 192.168.1.1) and Login as below：
Login Interface
Enter the username (Default: admin) and password (Default: password) and click “Login”
Caution：
IP address of your PC must be the same subnet of device
After login, you can check basic information of device, such as MAC address off device, Firmware version, etc.
Device Information
8
Status
Select Status, you will get the information as below,
Status
System: This field identifies the current time and Coordinates.
GPS: GPS Satellites Information (Only for GPS Model)
Wireless:
MAC Address: MAC of Remote MIMO WiTDM Bridge.
IP Address: IP of Remote MIMO WiTDM Bridge.
Local RSSI: RSSI of Local Bridge.
Remote RSSI: RSSI of Remote Bridge.
Tx/Rx Rate: Current Data Rate of Tx/Rx.
Tx/Rx Modulation: Current Modulation of Tx/Rx.
How to Setup MIMO WiTDM Bridge
Get Position, Longitude and Latitude
Get Direction and Azimuth
Signal Status, In Status page, it can show remote bridge Signal Strength for local bridge (Local RSSI) and local
bridge Signal Strength for remote bridge (Remote RSSI). We can decide the best direction of antenna from
following steps:
1. We check the Local RSSI only in one side. (We call it local side.)
2. Fix remote side antenna, and adjust local side antenna. In local side, check the “Local RSSI” first, to
find a best Local RSSI and then fix the local antenna.
9
3. Adjust the Remote antenna, to find the Best Remote RSSI, and then fix the remote antenna.
4. If “Local RSSI” is changed, and worse than before, adjust local antenna again to get a best one and fix
local antenna.
5. If “Remote RSSI” is changed and worse, adjust remote antenna again.
6. Follow the same ways to get a better Local RSSI and Remote RSSI value. And Fix both side antennas.
Port Statistic:
Display Wireless and Ethernet statistics of packets including transmitted and received packets, Unicast, Broadcast,
Multicast and total Packets. Click “Refresh” can get instant information.
10
MAP
Global Positioning System, GPS (Only for GPS Model)
Select GPS, Can obtain current position from GPS receiver.
Topology
Select Topology, Can enable topology discovery protocol to establish the structure of connections.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
