FORESIGHT SIM-IN-A-BOX EAGLE PLUS PACKAGE Manual de usuario
ASSEMBLY INSTRUCTIONS
Version 1.1EAGLE PLUS / BIRDIE PACKAGE
BEFORE YOU GET STARTED
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 2
THANK YOU for purchasing our SIM-IN-A-BOX package.
We're sure this package will provide you with years of enjoyment.
Before getting started with assembly, please conrm the following
to ensure your safety and those using your simulator:
Following these simple guidelines will ensure you get the most out
of your purchase, the safest way possible.
Measure and conrm you have enough space to safely install
and play. The nal setup size of your simulator will be
approximately 10 feet tall x 14 feet deep x 13 feet wide. Make
sure you have extra space for the assembly process.
Make sure you have an assistant during the assembly process.
The frame assembly requires TWO PEOPLE to safely complete.
Make sure you have all required and recommended tools to
ensure a safe assembly and setup process.
CONTENTS INSIDE THE BOX
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 3
COMPONENTS
∙(1) Frame Assembly System
∙(1) Front (Hitting) Screen
∙(1) Back Screen
∙(2) Inner Walls
∙(2) Outer Wall Covers
∙(1) Lid Panel
∙(1) Above Screen Panel
∙(1) Blackout Panel
∙(1) Rolling Computer Cart
∙(2) Rolls of Turf
∙(1) Hitting Mat and Tray System
∙ (1) Simulation Optimized PC
∙(1) Wireless Keyboard/Trackpad
∙(1) Projector with Power and HDMI Cables
∙(1) GCQuad or GC2 Launch Monitor
TOOLS
∙(1) Ratchet with 3/4” Socket
∙(1) 15 Ft Steel Fish Tape (Roll)
∙(1) Zip Ties (Bundle)
∙(1) 15’ Ratcheting Rope
∙(1) Shock Cord
REQUIRED TOOLS & ITEMS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 4
REQUIRED TOOLS (NOT INCLUDED)
∙(2) 6-8' Ladders
RECOMMENDED TOOLS (NOT INCLUDED)
∙Impact Drill with 3/8" Impact Adapter
∙Snips for cutting Zip Ties
∙Work Gloves
∙Eye Protection Glasses
TABLE OF CONTENTS
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 5
STEP 1: FRAME ASSEMBLY
STEP 2: TURF & SCREEN
STEP 3: EXTERIOR PANELS
STEP 4: COMPONENT SETUP
STEP 5: SOFTWARE SETUP
. . . . . . . . . . . . . . . . . Page 6
. . . . . . . . . . . . . . . . . Page 20
. . . . . . . . . . . . . . . . . Page 29
. . . . . . . . . . . . . . . . Page 37
. . . . . . . . . . . . . . . . . Page 46
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 6
Locate the ONE (1) Left Base (Grey Fiberglass) and the ONE (1) Rear Base
Left Corner Support (Black Steel).
Connect the components at the corners marked with the PINK color code
using the bolts and nuts pre-attached to the left base.
Sim-in-a-Box Installation Guide
Step One:
Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal) and connect to
the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel) (Horizontal).
1A
1B
Left Base
Rear Base Left Corner Support
Sim-in-a-Box Installation Guide
Step One:
Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal) and connect to
the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel) (Horizontal).
Sim-in-a-Box Installation Guide
Step One:
Find the Red/Purple/Light Pink Left Base (Grey Fiberglass) (Horizontal) and connect to
the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel) (Horizontal).
x 1
Step Two:
Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No
Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel -
No Velcro) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 7
Locate the ONE (1) Rear Base Middle Support (Black Steel / No Velcro)
Connect to the step 1 assembly at the corners marked with the DARK BLUE color code
using the bolts and nuts pre-attached to the Rear Base Left Corner Support.
2A
2B
Rear Base Middle Suppprt
Step Two:
Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No
Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel -
No Velcro) (Horizontal).
Step Two:
Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No
Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel -
No Velcro) (Horizontal).
x 1
Step Three:
Connect the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel - No Velcro)
(Horizontal) to the Dark Blue/Tan Rear Base Right Corner Support (Black Steel - No
Velcro) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 8
Locate the ONE (1) Rear Base Right Corner Support (Black Steel / No Velcro)
Connect to the step 2 assembly at the corners marked with the DARK BLUE color code
using the bolts and nuts pre-attached to the Base Right Corner Support.
3A
3B
Rear Base Right Corner Support
Step Two:
Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No
Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel -
No Velcro) (Horizontal).
Step Two:
Connect the Light Pink/Dark Blue Rear Base Left Corner Support (Black Steel - No
Velcro) (Horizontal) to the Dark Blue/Dark Blue Rear Base Middle Support (Black Steel -
No Velcro) (Horizontal).
x 1
Step Four:
Connect the Dark Blue/Tan Rear Base Right Corner Support (Black Steel - No Velcro)
(Horizontal) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 9
Locate the ONE (1) Right Base (Grey Fiberglass).
Connect to the step 3 assembly at the corners marked with the TAN color code
using the bolts and nuts pre-attached to the Right Base.
4A
4B
Right Base
Step Four:
Connect the Dark Blue/Tan Rear Base Right Corner Support (Black Steel - No Velcro)
(Horizontal) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Step Four:
Connect the Dark Blue/Tan Rear Base Right Corner Support (Black Steel - No Velcro)
(Horizontal) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
x 1
Step Five:
Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass)
(Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey
Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass)
(Horizontal).
STEP 1: FRAME ASSEMBLY
ASSEMBLY INSTRUCTIONS EAGLE PLUS / BIRDIE PACKAGE VERSION 1.1
PAGE 10
Locate the TWO (2) Rear Side Wall Bottom Supports (Grey Fiberglass).
Note: Velcro LOOP on the outside edge, velcro HOOK on the back edge.
Connect to the step 4 assembly
at the corners marked with the
PURPLE color code
using the bolts and nuts
pre-attached to the Left Base
and Right Base.
5A
5B
Rear Side Wall Bottom Supports (x2)
Step Five:
Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass)
(Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey
Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass)
(Horizontal).
Step Five:
Connect One Purple/Light Blue Rear Right Side Wall Bottom Support (Grey Fiberglass)
(Vertical) to the Red/Purple/Tan Right Base (Grey Fiberglass) (Horizontal).
Then, connect One Purple/Light Blue Rear Left Side Wall Bottom Support (Grey
Fiberglass) (Vertical) to the Red/Purple/Light Pink Left Base (Grey Fiberglass)
(Horizontal).
x 2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios para videojuegos de FORESIGHT
Manuales populares de Accesorios para videojuegos de otras marcas
Sega
Sega Visual Memory Unit Manual de usuario
Datel
Datel Go-tcha Expedition Manual de usuario
TruGolf
TruGolf TruFlight 2 Manual de usuario
CH Products
CH Products CH PRO THROTTLE Manual de usuario
Thrustmaster
Thrustmaster T2PA Manual de usuario
Cube Controls
Cube Controls Mercedes-AMG - GT Edition SIM Wheel Manual de usuario
