!
FORENSICS DETECTORSTM
www.forensicsdetectors.com
4. Operation (see YouTube Tutorial)
1. Turn ON the Vape Detector by plugging the USB power to it.
2. When ON, the blue LED will flash, indicating the unit is ready for Smart
Phone Setup. To force it in pairing mode, press the button to trigger the
LED to flash fast, indicating pairing mode.
3. Connect to the TUYA app. See Section 7 to connect to the TUYA App.
4. The blue LED will remain constantly ON when it is properly connected to
your smartphone via the TUYA app and operating normally.
5. Confirm the Vape Detector works by blowing smoke or vape on the unit.
Ensure your alarms are triggering as setup within the app. This is the best
way to ensure the unit is working. Once the Vape Detector is operating
and alarming on your smartphone then mount it on the wall or ceiling.
6. When the unit is turned off (power cable disconnected), and then turned
back ON, the Vape Detector will automatically re-stablish connection and
begin operating as normal.
5. Select the Mount Location
• Avoid installation in areas where the temperature is colder than 40°F
(4.4°C) or hotter than 100°F (37.8°C).
• Do not install 4 ft near vents, flues, or any forced/unforced air ventilation
openings. Do not install where showers are located. (humidity and steam
will trigger false alarms)
• Do not install near ceiling fans, doors, windows or areas directly exposed
external air (avoid dilution effects).
• Do not install in dead air spaces, such as peaks of vaulted ceilings or
gabled roofs (not efficient smoke passage way).
• Do not obstruct the vents located on the Vape Detector. Do not place the
alarm where drapes, furniture or other objects block the flow of air.
• Install as close as possible where suspected vaping is taking place (i.e.
above restroom cubicles and stalls).
