FOR-A MBP-120SX Manual de usuario

MBP-120SX

MBP-125SX

MXF Clip Server S

2nd Edition

OPERATION

MANUAL

Edition Revision History

Edit.

Rev.

Date

Description

Chapter

(Not released)

2014/09/01

Precautions

Important Safety Warnings

[Power]

Operate unit only on the specified supply voltage.

Disconnect power cord by connector only. Do not pull on cable portion.

Do not place or drop heavy or sharp-edged objectson power cord.A damaged cord

can cause fire or electrical shock hazards. Regularly check power cord for

excessive wear or damage to avoid possible fire / electrical hazards.

[Grounding]

Ensure unit is properly grounded at all times to prevent electrical shock hazard.

Do not ground the unit to gas lines, units, or fixtures of an explosive or dangerous

nature.

Ensure power cord is firmly plugged into AC outlet.

[Operation]

Do not operate unit in hazardous or potentially explosive atmospheres. Doing so

could result in fire, explosion, or other dangerous results.

Do not allow liquids,metal pieces, or other foreign materials to enter the unit. Doing

so could result in fire, other hazards, or unit malfunction.

If foreign material does enter the unit, turn power off and disconnect power cord

immediately. Remove material and contact authorized service representative if

damage has occurred.

[Transportation]

Handle with care to avoid shocks in transit. Shocks may cause malfunction. When

you need to transport the unit, use the original packing materials or alternate

adequate packing.

Stop

Caution

Hazard

Caution

Hazard

Caution

[Circuitry Access]

Do not remove covers, panels, casing, or access circuitry with power applied to the

unit! Turn power off and disconnect power cord prior to removal. Internal servicing /

adjustment of unit should only be performed by qualified personnel.

Do not touch any parts / circuitry with a high heat factor.

Capacitors can retain enough electric charge to cause mild to serious shock, even

after power is disconnected. Capacitors associated with the power supply are

especially hazardous. Avoid contact with any capacitors.

Unit should not be operated or stored with cover, panels, and / or casing removed.

Operating unit with circuitry exposed could result in electric shock / fire hazards or

unit malfunction.

[Potential Hazards]

If abnormal smells or noises are noticed coming from the unit, turn power off

immediately and disconnect power cord to avoid potentially hazardous conditions. If

problems similar to above occur, contact authorized service representative before

attempting to again operate unit.

[Rack Mount Brackets, Ground Terminal, and Rubber Feet]

To rack mount or ground the unit, or to install rubber feet, do not use screws or

materials other than thosesupplied. Otherwise, it may cause damage to the internal

circuits or components of the unit. If you remove the rubber feetattached on the unit,

do not reinsert the screws securing the rubber feet.

[Consumables]

The consumables used in unit must be replaced periodically. For further details on

which parts are consumables and when they should be replaced, refer to the

specifications at the end of the Operation Manual. Since the service life of the

consumables varies greatly depending on the environment in which they are used,

they should be replaced at an early date. For details on replacing the consumables,

contact your dealer.

Caution

Hazard

Stop

Caution

Upon Receipt

Unpacking

MBP-120SX/125SX units and their accessories are fully inspected and adjusted prior to

shipment. Operation can be performed immediately upon completing all required connections

and operational settings.

Check your received items against the packing list below.

ITEM

QTY

REMARKS

MBP-120SX

MBP-125SX

AC Cord

1 set

One AC cord and one AC cord retaining clip

Rack Mount Brackets

1 set

EIA standard type

Rubber Feet

1 set

DVI-VGA Conversion

connector

CD-ROM

MBP-120/125SX Operation Manual (PDF)

MCS-MBPPON Operation Manual (PDF)

Unpacking

Option

ITEM

QTY

REMARKS

MBP-SSD480G

SSD upgrade option from 240GB to 480GB

IMPORTANT

Wait at least 15 seconds before turning the MBP-120SX/125SX back on after

powering off.

Check

Check to ensure no damage has occurred during shipment. If any damage has occurred, or

items are missing, inform your supplier immediately.

In order to verify that you have received a correct product, please check the model number

printed on the label attached on the rear panel at the lower right corner of the product as shown

below.

Trademark

Microsoft ® Windows ® 7 Embedded operating system is a trademark of Microsoft Corporation.

Rack Mounting

The MBP-120SX/125SX can be mounted to EIA standard rack units.When rack mounting a unit,

use the supplied rack mount brackets (rack ears).

Model number

AC100-240V 50/60Hz IN

SER. NO.

SDI IN SDI OUT GENLOCK IN

GPI/ALARM RS-232C REMOTE

DVI-I LAN2 LAN1 USB4 USB3

Table of Contents

1. Prior to Starting ...........................................................................................................................7

1-1. Welcome ..............................................................................................................................7

1-2. Comparing Features: MBP-120/125SX vs 100SX Series...................................................7

1-3. Features...............................................................................................................................7

1-4. Notes on Using The MBP-120SX/125SX............................................................................8

2. Panel Descriptions ......................................................................................................................9

2-1. Front Panel (MBP-120SX/125SX).......................................................................................9

2-2. Rear Panel (MBP-120SX)..................................................................................................10

2-3. Rear Panel (MBP-125SX)..................................................................................................11

2-4. Serial Interfaces.................................................................................................................12

2-4-1. Remote........................................................................................................................12

2-4-2. RS-232C .....................................................................................................................12

2-5. Parallel Interface................................................................................................................13

2-5-1. GPI / ALARM...............................................................................................................13

3. Connection and Video Conversion Porcess.............................................................................15

3-1. MBP-120SX .......................................................................................................................15

3-2. MBP-125SX .......................................................................................................................16

4. How to Change Network Settings.............................................................................................17

4-1. Connecting Monitor, Keyboard, and Mouse......................................................................17

4-2. Disabling Write-Protection .................................................................................................17

4-3. Changing the Computer Name..........................................................................................19

4-4. Changing the IP Address...................................................................................................21

4-5. Enabling Write-Protection..................................................................................................22

5. Specifications and Dimensions.................................................................................................23

5-1. Unit Specifications..............................................................................................................23

5-2. External Dimensions..........................................................................................................25

5-2-1. MBP-120SX ................................................................................................................25

5-2-1. MBP-125SX ................................................................................................................26

Appendix. How to Reset BIOS......................................................................................................27

1. Opening the BIOS Setup Menu.............................................................................................27

2. Main Menu Settings...............................................................................................................28

3. Configuration Menu Settings.................................................................................................29

4. Boot Menu Setting.................................................................................................................32

5. Saving Settings and Exiting BIOS Setup Menu....................................................................32

1. Prior to Starting

1-1. Welcome

Congratulations! By purchasing MBP-120SX/125SX MXF Clip Server you have entered the

world of FOR-A and its many innovative products. Thank you for your patronage and we hope

you will turn to FOR-A products again and again to satisfy your video and audio needs.

FOR-A provides a wide range of products, from basic support units to complex system

controllers, which have been increasingly joined byproducts for computer video based systems.

Whatever your needs, talk to your FOR-A representative.We will do our best to be of continuing

service to you.

1-2. Comparing Features: MBP-120/125SX vs 100SX Series

Item

MBP-100SX Series

MBP-120SX/125SX

USB interface

USB 2.0 x 4

USB 2.0 x 2

USB 3.0 x 2

Data storage

16GB (standard),

64GB, 128GB and 256GB (optional)

240GB (standard)

480GB (optional)

Size and Weight

EIA 1RU, 8 kg

Windows XP Embedded

Windows 7 Embedded

1-3. Features

The MBP-120SX/125SX devices are cross converters between MXF(XDCAM) files and HD/SD

SDI baseband signals. The devices have SSD (Solid State Drive) installed to ensure reliable

playback. High-speed file transfers over network is also supported.

Real-time conversion from HD/SD SDI inputs to MXF files

Built-in SSD storage, which allows to use MBP-120SX/125SX as a stand-alone MXF

player

MXF XDCAM format supported

Hardware codec for stable encoding and decoding

EIA 1RU compact size

Playback (decoding) supports:

•Real-time conversion of MXF files to HD/SD-SDI signals (also supports MXF file

transfer over a network)

•Embedded audio (* up to 8 channels), and Ancillary Time Code

•AES output of embedded audio data (* up to 8 channels)

•Conversion of embedded time code data to LTC (MBP-125SX only)

•Superimposition of embedded time code data onto video output (MBP-125SX only)

Recording (encoding) supports:

•Real-time conversion of HD/SD-SDI signal inputs to MXF files

•Embedded audio (* up to 8 channels), and Ancillary Time Code

•External AES inputs (MBP-125SX only)

•External LTC input (MBP-125SX only)

No need to log-off and OS shutdown

Remote control via RS-422 using VTR protocol

GPI remote control

* The maximum number of channels varies depending on the MXF format.

1-4. Notes on Using The MBP-120SX/125SX

Please note the following:

EWF (Enhanced Write Filter) must not be disabled when operating the device.

Powering the MBP-120/125SX on or off while EWF is disabled may corrupt or damage files.

The C drive of the MBP-120/125SX is write-protected.

Do not create folders or data in the C drive.

Writing in the C drive may cause Windows to hang up.

Files cannot be created on the desktop regardless of whether write-protection is enabled or

disabled.

The below error message will appear if you attempt to write on the desktop.

The MBP-120/125SX has the Windows Operation System (Microsoft Windows 7) installed

and customized.

Do not install applications that are not required.

2. Panel Descriptions

2-1. Front Panel (MBP-120SX/125SX)

No.

Name

Description

Status

Indicators

POWER

Lit green

Power is supplied to the unit.

Unlit

The unit is powered off or the power cord is not

plugged in properly.

FAN

Unlit

All cooling fans are operating properly.

Lit red

One or more fans have failed. Power off the

unit and replace the failed fan, if necessary.

Power

switch

Power

indicator

Switch used to turn the unit ON / OFF.

Power indicator will light up green when the power switch is turned ON.

It takes about 5 seconds for the indicator to light. Wait at least 15

seconds to turn ON again after the power switch is turned OFF.

USB1

USB2

Used to connect USB devices such as a keyboard, mouse, and other

USB devices (USB2.0 compatible).

RESET

If the POWER indicator does not light up green in 5 seconds after the

power switch is turned on, press the RESET switch to restart

MBP-120SX/125SX. (Not for normal use.).

IMPORTANT

If the FAN indicator lights up red,there is a fan failure. Turn off the MBP-120SX/125SX

and contact your retailer.

OFF

POWER

RESET

POWER FAN

USB 1 USB 2

MBP-120SX

CLIP SERVER

2-2. Rear Panel (MBP-120SX)

No.

Name

Description

AC IN

For connection to an AC power source via the supplied accessory cord.

(100-240VAC 50/60Hz)

Ground

Terminal

For grounding the unit to protect operators against static electricity and /

or electrical shock.

Cooling Fan

For cooling the unit to prevent overheating. Do not block the vent with

other equipment or objects.

SDI IN

For serial digital component video input (HD/SD SDI). (BNC)

SDI OUT

For serial digital component video output (HD/SD SDI). (BNC)

OUT 3 and 4 are supported for superimposing time code.

GENLOCK

For external reference signal input (Black Burst signal or Tri-level sync

signal). (BNC)

Audio Out

Stereo headphone jack (Unable to monitor source audio.)

GPI / ALARM

For power / fan alarm output and the GPI input/output.

(15-pin D-sub, female)

RS232C

Used for RS232C serial interface for control via PC.

(9-pin D-sub, male)

REMOTE

Used for RS422 seria interface for control via PC.

(9-pin D-sub, female)

DVI-I

For output video on a monitor.

LAN1/2

Ethernet ports (100BASE-TX/1000BASE-T, RJ-45 x 2)

USB3

USB4

For connection to USB devices (USB3.0 compatible).

AC100-240V 50/60Hz IN

SER. NO.

SDI IN SDI OUT GENLOCK IN

GPI/ALARM RS-232C REMOTE

DVI-I LAN2 LAN1 USB4 USB3

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de FOR-A

FOR-A

FOR-A MBP-100PD Series Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario