FOR-A MV-400 Manual de usuario

Remote Control Software

MV-400

Multi Viewer

Version 3.0 - Higher - Rev.1

OPERATION

MANUAL

Table of Contents

1. Setup ..........................................................................................................................................1

1-1. Overview.............................................................................................................................1

1-2. Operating Environment.......................................................................................................1

1-3. Software Installation............................................................................................................2

1-3-1. Using the Video Transfer Function in Internet Explorer...............................................2

1-3-2. Using MV-400 LiveViewer...........................................................................................2

1-3-3. Java2 Runtime Environment.......................................................................................3

1-3-4. Windows Installer 3.1..................................................................................................4

1-3-5. Microsoft .NET Framework 2.0 ...................................................................................5

1-3-6. Microsoft Visual C++ 2005 Redistributable.................................................................6

1-3-7. MV-400 LiveViewer.....................................................................................................6

1-4. Software Uninstallation .......................................................................................................7

1-5. Connections........................................................................................................................7

1-6. Communication Standards..................................................................................................7

1-7. PC Network Settings...........................................................................................................8

2. Remote Control in Internet Explorer..........................................................................................10

2-1. Starting and Connecting in Internet Explorer ....................................................................10

2-2. Exiting Internet Explorer....................................................................................................10

2-3. Control Screen..................................................................................................................11

2-4. SXGA Output Control........................................................................................................12

2-5. Video Output Control ........................................................................................................13

2-6. Video Transfer (VIEWER).................................................................................................14

2-7. Menu Operations ..............................................................................................................15

2-7-1. MAIN MENU .............................................................................................................15

2-7-2. TIME SETUP ............................................................................................................16

2-7-3. ALARM/VIDEO LOSS...............................................................................................17

2-7-4. TITLE/POSITION......................................................................................................18

2-7-5. DISPLAY...................................................................................................................20

2-7-6. LAN...........................................................................................................................23

2-7-7. SYSTEM...................................................................................................................24

3. Video Transfer Using MV-400 LiveViewer.................................................................................26

3-1. Starting and Connecting MV-400 LiveViewer....................................................................26

3-2. Shutting Off and Exiting MV-400 LiveViewer.....................................................................27

3-3. Controller Screen of MV-400 LiveViewer ..........................................................................28

3-4. Viewer Screen in MV-400 LiveViewer...............................................................................30

4. Troubleshooting ........................................................................................................................31

Trademarks

Microsoft Windows® 2000 and XP operating systems are registered trademarks or trademarks

of Microsoft Corporation (USA) in the United States and other countries.

.NET Framework is a registered trademark or trademark of Microsoft Corporation (USA) in the

United States and other countries.

Pentium® is a registered trademark or trademark of Intel Corporation (USA) in the United States

and other countries.

JavaTM and the Java logo are registered trademarks of Sun Microsystems, Inc.

1. Setup

1-1. Overview

The Multi Viewer MV-400 uses a network connection to enable remote control from a PC and

video transfer to a PC. Remote control is possible using the Internet Explorer web browser

preinstalled in Windows so that no special software needs to be installed. Video transfer can be

performed in two ways: Using Internet Explorer or using the special MV-400 LiveViewer

software. Although software must be installed to use MV-400 LiveViewer, it allows a higher

frame rate for video transfer compared to Internet Explorer.

1-2. Operating Environment

The MV-400 remote control software requires the PC operating environment below.

Compatible OS Windows 2000 Professional SP4 and later or

Windows XP SP2 or later (Professional or Home Edition)

Internet Explorer 6.0 or later

.NET Framework 2.0 (stored on supplied CD-ROM) *1

Visual C++2005 Redistributable (stored on supplied CD-ROM) *1

Software

Java2 Runtime Environment 5.0 (stored on supplied CD-ROM) *2

CPU Pentium IV 3 GHz or faster

Memory 1GB or more (512MB if Multicast mode is not used.)

Display Resolution of 1024x768 pixels or higher

Capable of displaying full color (24 bit)

* When transmitting 1280 x 960 pixels video with the optional

software (MV-40EX), use a display with a resolution higher than

1280 x 1024 pixels.

LAN adapter At least one 10BASE-T/100BASE-TX compatible port

LAN cable Enhanced category 5 or higher

*1: Not needed if using MV-400 LiveViewer.

*2: Not needed if the video transfer (Viewer) function will not be used in Internet Explorer.

1-3. Software Installation

1-3-1. Using the Video Transfer Function in Internet

Explorer

To use the video transfer function (Viewer) with Internet Explorer, the Java2 Runtime

Environment 5.0 must be installed beforehand. See section 1-3-3. "Java2 Runtime

Environment" for the installation procedure.

IMPORTANT

Be sure to perform all software installation by logging in withAdministrator rights. The

installation will not be performed properly under User rights.

The video transmission function (Viewer) with Internet Explorer may not perform

properly with other version of the Java2 Runtime Environment than the version 5.0.

Open Add/Remove Programs (Add or Remove Programs in Windows XP) in the

Control Panel and see if there is the Java2 Runtime Environment of higher version. If

there is the higher version, uninstall it.

1-3-2. Using MV-400 LiveViewer

To use the video transfer function with MV-400 LiveViewer, three software applications

provided by Microsoft and the MV-400 LiveViewer must be installed in the order below. The

installation procedure is described starting from section 1-3-4. "Windows Installer 3.1" to

section 1-3-7. "MV-400 LiveViewer."

(1)Windows Installer 3.1

(2)Microsoft .NET Framework 2.0

(3)Microsoft Visual C++2005 Redistributable

(4)MV-400 LiveViewer

Please note, however, that some PCs may already have this software installed. To check,

open Add/Remove Programs (Add or Remove Programs in Windows XP) in the Control

Panel, and see if the software from (1) to (3) are installed. You do not need to install the

software if it is already installed.

NOTE

An older version of the software, "Microsoft .NET Framework 1.1" is usually

preinstalled in Windows XP. In this case, "Microsoft .NET Framework 2.0" must be

installed.

The PC needs to be restarted during the installation process. Therefore, be sure to exit all

applications that are running before starting installation.

IMPORTANT

Be sure to perform all software installation by logging in withAdministrator rights. The

installation will not be performed properly under User rights.

1-3-3. Java2 Runtime Environment

1) Load the supplied Installation CD-ROM into the PC, and open the CD-ROM drive. Run the

file "jre-1_5_0_07-windows-i586-p.exe" to start the installation wizard.

2) After the installation wizard starts, the [License Agreement] dialog is displayed.

Click Accept to start installation.

3) When installation is completed normally, the next screen is displayed. Click Finish to

restart the PC.

1-3-4. Windows Installer 3.1

1) Load the supplied Installation CD-ROM into the PC, and open the

CD-ROM drive. Run the file "WindowsInstaller-KB893803-v2-x86.exe"

to start the installation wizard.

2) After the installation wizard is started, click Next.

3) The [License Agreement] dialog is displayed. Select the "I Agree" check box, and then

click the Next button to start installation.

4) When installation is completed normally, the screen shown below is displayed. Click

Finish to restart the PC.

1-3-5. Microsoft .NET Framework 2.0

1) Run the file "dotnetfx.exe" on the CD-ROM to start the setup wizard.

2) After the setup wizard is started, click Next.

3) The End User License Agreement is displayed. Select "I accept the terms…" check box,

and then click Install to start the installation process.

4) When installation is completed normally, the screen shown below is displayed. Click

Finish.

1-3-6. Microsoft Visual C++ 2005 Redistributable

1) Run the file " vcredist_x86.exe" on the CD-ROM to start the setup wizard.

2) Once vcredist_x86.exe is started, the progress bar shown below is displayed. When the

progress bar reaches the end, the installation is complete.

1-3-7. MV-400 LiveViewer

Create a folder, and then copy the file "MV400LiveViewer.exe" on the CD-ROM to the

created folder.

Tabla de contenidos

Otros manuales de Marco de fotos digital de FOR-A

FOR-A

FOR-A MV-410HS Manual de usuario

Manuales populares de Marco de fotos digital de otras marcas

LENCO

LENCO DF-830 Manual de usuario

NIX

NIX Advance X10G Manual de usuario

Nextar

Nextar N7S-100 Manual de usuario

Sungale

Sungale TD350A Manual de usuario

texet

texet DPF-830 Instrucciones de montaje

Philips

Philips SPF2017 Manual de usuario

Philips

Philips SPF1327 Manual de usuario

Philips

Philips SPF7010/10 Manual de usuario

Digital Spectrum

Digital Spectrum MemoryVue MV-1500 Manual de usuario

ViewSonic

ViewSonic VFM1042-52 Manual de usuario

YURAKU

YURAKU YUR.PHOTO 7B4C Manual de usuario

Denver

Denver PFF-710WHITE MK2 Manual de usuario

Pandigital

Pandigital PAN8000DWPCF1 Manual de usuario

Rekam

Rekam Deja View HD-850 Manual de usuario

Majestic

Majestic DF 918HD MP3 Manual de usuario

ViewSonic

ViewSonic DPF8-CAM Manual de usuario

Philips

Philips SPF2527 Manual de usuario

Digital Foci

Digital Foci Image Moments IMT-063 Manual de usuario