FONDI T0001 Manual de usuario
UserManual
T001
1
1. Introduction to Tablet PC
1.1 Overall Machine Diagram of Tablet PC
Front Diagram:
Figure 1-1
Side Diagram:
Figure 1-2
Side Diagram:
Figure 1-3
2
Bottom Diagram:
Figure 1-4
1.2 Tablet PC Use and Preparation
Battery charging
Charge the battery before using the Tablet PC for the first time.
1. Use the charger and data line authorized by our company only. Unauthorized charger
or data line may lead to battery explosion or damage your device.
2. If the battery power is used up, even if the device is being charged, the device cannot
be started. Before attempting to start the device, let the used up battery be charged for
several minutes.
3. After connecting power source to the power adapter, insert it into the right power
source interface of the device, and it can charge your device.
4. USB charging: Connect one end of the USB data line to the USB power source
(standard power source such as computer, and power adapter), and then insert the
other end of the USB data line into the USB interface of the device.
3
1.3 Tablet PC Status and Notice
Mail notice Mute
Gmail notice No SD card is inserted
Computer and Tablet PC is
connected through USB line. Uploading/downloading
Things to be done Download is completed.
Start alarm clock
General notice (such as
synchronization error)
Music is being played. More
Data is being synchronized. Battery mark
SD card space is insufficient. Battery is being charged.
WIFI service is connected and
network is available. Flying mode
3G service is being connected
and data is being exchanged. Bluetooth is connected.
1.4 Key Functions
Descriptions on Key functions:
Power
Source key
Long press this key to start
In start status, long press this key to pop up the Close
option.
In start status, press this key to close the screen.
In start status or when failure occurs to the machine, long
press the Power Source key for 7 seconds to let your device
enter the Close status.
Volume Press Volume+ to turn up the volume, Volume- to turn
down the volume
4
1.5 Start screen in close status
If the screen is in close status, you can short press the power source key or long press the
return key to start the screen. After the start, the screen enters lock status, use your finger
to press and hold “Lock” icon and slide toward right to unlock the screen.
Figure 1-5
1.6 Use of Touch Screen
Operation modes in the Tablet PC
There are multiple methods to view the home screen, menu and application programs on
your Tablet PC.
Choose by pointing
When you want to use screen keyboard to input information and choose items on the
homepage interface such as application programs, you only need to point with your finger.
Press and hold
If you want to start the available option of a certain item (such as text box or link in the
webpage), or move the shortcut and the main program menu on the homepage interface,
you only need to press and hold this item.
Quick slide or slide
Quick slide or slide means using finger to make quick vertical or horizontal drag action in
the picture.
Drag
5
Before beginning to drag, you must use your finger to press, hold, and apply certain
pressure and do not loosen your finger before you drag the item to the position you desire.
Rotation
Regarding most pictures, you only need to rotate the Tablet PC sidewise, and the screen
can be automatically turned from horizontal to vertical direction, such as the cases when
you input words and see a movie.
1.7 Homepage Interface
The main menu screen will display all the application programs on the native computer.
You can use the application programs, shortcut and customize the wallpaper of your
homepage interface.
Figure 1-6
Skill: In any application programs, it is possible to press the Homepage key to return to the
homepage interface.
1.8 Access Application Programs
How to access the application programs of the Tablet PC:
1. Click the application program menu, as shown in Figure 1-7
2. Choose the application program to be accessed.
Notice and
status
column
Wallpapers
Search
column
Application
pro
g
rams
6
3. When wanting to exit from the program interface, press Return key to return to the
preceding interface or press Homepage key to directly return to the homepage
interface.
Figure 1-7
1.9 USB Connection
Tablet PC Storage Setting
Before transmitting the file, you must firstly set up storage mode for your Tablet PC:
1. Use USB transmission line to connect the Tablet PC and the computer. A notice
prompt will appear in the notice column.
2. Click status column, and status column option appears.
3. In the status option, click and choose USB connected, and then click and choose
Open USB Storage Device.
4. At this time, the USB is connected successfully.
Application
program
Small parts of window
7
Figure 1-8
Copy the file to the storage card
1. Use the USB cable to connect the Tablet PC and the computer.
2. After setting up according to the storage of the Tablet PC, it connects to the
computer successfully.
3. Open your computer to check the content in “Removable Disk (x)” in My Computer.
4. Find the file you want to copy and copy it to “Removable Disk (x)”.
5. After the copy is completed, click “Delete Hardware Safely” in Your Computer Task
column for unloading.
Content of Tablet PC Storage Device
1. NAND FLASH storage device and the Tablet PC themselves serve as the space for
storing files.
2. TF card.
3. Both of the abovementioned two types of storage device can connect your computer
through the USB for access.
Attention: When your Tablet PC is connected to the USB cable, if you have enabled the
USB storage device, you can access the storage card through the Tablet PC. If you want to
access the storage card in the Tablet PC, you only need to disconnect the USB cable.
1.10 Storage card
Copy the file to the storage card
8
You can transmit files between your Tablet PC and the computer, such as music and picture.
When wanting to check the files in your Tablet PC, you only need to click and choose the
file browser, and you can browse the contents in the SD card.
Delete file on the storage card of the Tablet PC
1. Find the file you want to delete.
2. Press and hold the filename you want to delete, and a file menu pops up.
3. Click and choose Delete.
Remove storage card in the start status of the Tablet PC
If you need to remove the storage card in the start status of your Tablet PC, you must
firstly unload the storage card in order to avoid storage card failure or damage.
1. In the homepage interface, press Menu key, and then click and choose Setting.
2. Drag Setting menu downward, and then click and choose Storage.
3. Click and choose SD card setting.
4. Click and choose Unload SD card.
1.11 Input Words
Use screen keyboard
When you start the program or choose the text box into which you need to input words or
numbers, the screen keyboard appears. For the keyboard, there are the following input
methods available for choose in:
1. Android keyboard
2. Third party input method (users can install it by themselves)
Choose the input method you want to use
According to pre-setting, the Tablet PC will display Android keyboard when you want to
input words.
1. In the homepage interface, press Menu key, and then click and choose Setting.
2. Click and choose Language and keyboard.
3. In the text setting area, all input methods already installed in your Tablet PC are listed
out.
4. Add a tick after the input method you need.
Use and switch input method
1. On the words input interface, click the keyboard icon under the status column till Edit
text menu pops up. Then click and choose the input method.
2. Choose the input method you need.
9
Figure 1-9
1 Switch inputting uppercase and lowercase.
2 Switch words input mode and sign/number input mode.
3 Blank space can be inserted by clicking and choosing.
4 Enter can be executed by clicking and choosing.
5 By clicking, choosing, pressing and holding, it is possible to delete the
character on the left of the cursor.
6 Click this switch input method.
2. Create Connection
2.1 WIFI connection
Your Tablet PC can connect to the Wi-Fi network, and the connection operation is:
1. On the homepage interface, click and choose Menu key to pop up Setting menu.
2. Click and choose System setting.
3. Click Wi-Fi to open the wi-fi switch.
⑤
②
①
③
④
⑥
Tabla de contenidos
Otros manuales de Tableta de FONDI
