foc.us moovs Manual de usuario
foc.us v2, dock and moovs
instructions
2
Congrats on your foc.us moovs neuro-
stimulator, lets get started!
1. Connect your foc.us v2 and moovs
together
2. Stick the hydrogel pad to your clean dry
head and then attach the moovs
3. take charge - start your neuro-modulation
session
Please ensure you have the foc.us+ connect
software installed on your computer.
Quick Start
3
If you suffer epilepsy, seisures, brain
lessions, bipolar depression or severe heart
disease you should not us a foc.us headset.
If you experience any short term negative
effects with focus you should stop use
immediately. foc.us moovs is not a toy and
is not intended for use by anyone under
the age of 18 years old. Do not position
electrodes over cuts, grazes or damaged
skin. Allow at least 48 hours between
usage. Do not touch the metal electrodes as
this can lead to burns.
Warning
WARNINGCE CERTIFIED BF APPLIED PART
4
Please download the foc.us+ connect
software for your computer from
http://www.foc.us/v2/downloads
You must have the correct drivers installed
for your foc.us dock to draw power via USB.
Installing the software is also allows you to
keep your foc.us rmware up to date.
Download
5
Firmly insert your foc.us v2 into the dock
and connect the dock to a 5V power supply
e.g. your computer.
You must have the drivers or software
installed on your computer for charging
function to work correctly.
Charge
6
Press the blue joystick to wake the foc.us
v2
The programs menu contains ve default
programs which you can tailor to your
needs.
The setup menu allows you to change
device specic settings.
Menus control
7
There are four different modes that can be
used for neuro-modulation.
Each mode produces a different electrical
signal shape.
tDCS
transcranial Direct Current Stimulation.
This mode generates a current at a
constant value.
Modes
8
tACS
transcranial Alternating Current Stimulation.
This mode generates a current with an
alternating value shaped like a sine wave.
Frequency setting determines how many
cycles per second will be generated.
Bipolar setting determines if the electrodes
will alternate polarity during a cycle.
9
tRNS
transcranial Random Noise Stimulation
This mode generates a random current
where either the frequency or target current
can be randomized.
tPCS
transcranial Pulsed Current Stimulation.
The mode generates pulses of current
shapes like square waves, where the duty
cycle can be controlled.
10
The maximum voltage setting will
determine the maximum voltage at the
electrodes.
This setting overrides the target current
value and so can prevent a target current
being reached if the resistance of the
electrode or head is too great.
The target current value can be set for all
modes.
The maximum possible setting is 2.0mA
and the device is hardware limited to
2.05mA
If using non-foc.us electrodes please be
careful to ensure the current density is
within considered safe guidelines.
Current
Voltage
Tabla de contenidos
Otros manuales de Auriculares de foc.us
