13
Specification
Usage
Charging
Check the power
Discharge
Shut down
●
Please insert the 12V / 2A power adapter into the power input interface, red
charging indicator light is on, at the same time, the blue power indicator will flash;
when the four blue lights are flashing in turn, it means that the battery is fully
charged; When the four blue lights are all off, only the red light is on, that means
the battery is fully charged.
●
Short press the power button, red, blue light will flash for about 3 seconds
then automatically off (1 blue light flashing for about 25% of the electricity, 2
blue light flashing for about 50% of the power, 3 blue light flashing for about
75%, 4 blue light flashing for about 100% of the power)
●
The power output line corresponding to the positive and negative direction
inserted in the power output interface,
according to the output voltage need, toggle the switch to 7.4V or 11.1V
position, short press the power button once,
after the release, immediately long press the power button for about 3
Seconds until the power indicator blue lights are all on in turn ,that means
boot successfully. When the four blue lights are off in turn (that the lack of
electricity), please charge in time. When the power alarm indicator light
flashes 60 seconds will automatically shut down.
●
Short press the power button once, after the release, immediately long press
the power button for about 3 Seconds until the power indicator blue lights are
all off in turn ,that means the battery is off.
14
