Flying Eye DJI MATRICE 300 RTK Manual de usuario

Parachute system and

Circuit breaker

DJI MATRICE 300 RTK

Before using the parachute system, please read this manual carefully.

Flying Eye has been your partner specialised in drone technology since 2009. We have been

developing parachute systems since the drone regulaons appeared in 2012. It’s a pyrotechnic sys-

tem based on aviaon technology, making it the most ecient and lightest system on the market.

Flying Eye could not be responsible for any malfuncon or operaon deemed to be inecient.

USER MANUAL

PRESENTATION

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

FLYSAFE-M3 12/11/2020

Flying Eye may suspend the guarantee and disclaim all liability to any person who fails to comply

with the basic safety instrucons set out below. Flying Eye declines all responsibility for damage or injuries

directly or indirectly related to the use pyrotechnic cartridges that do not conform to the safety require-

ments and standards.

• It is forbidden to carry out any operaon other than those specied in the manual.

• The device should only be used by (or supervised by) a responsible adult. Always keep the device out of

the hands of children. Do not allow children to play with it.

• In any case, you must not dismantle the various elements of the device, except during the maintenance

provided for this purpose and in accordance with the indicaons provided in this manual..

• Do not place the device in a humid or wet environment and keep it away from UV light.

• Do not expose the system to high or low temperatures, strong shocks, risk of shocks, contact with

chemicals, acids, long-term storage in high humidity or dust. Inappropriate use can cause the pyrotech-

nic cartridges to explode and endanger your life. The maximum operang temperature is 40°C and the

minimum operang temperature is -15°C.

• The condion of the parachute system must be checked before each use. Do not use the device if it is

damaged or malfuncons. If this is the case, contact your retailer.

• The parachute cannot prevent the drone from malfunconing.

• Any ight with a drone implies the existence of a risk for the equipment and people in the area, with or

without a parachute.

• The use of a parachute must not under any circumstances increase your risk.

• The parachute must be triggered manually by the user. Regular training is necessary to be able to react

correctly in an emergency. For the safety of the equipment make dummy releases of ground exercises

regularly.

• The ejecon system only works once. It must be returned to your dealer for recharging.

• Aer the device has been triggered, it is recommended that each component be carefully inspected to

ensure its integrity. If you have any doubts, please contact your dealer.

USER MANUAL

WARNINGS

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

DESCRIPTION :

Reliable and lightweight safety system for S2 and S3

approval of the DJI MATRICE 300 RTK. It includes an ul-

tra-fast double parachute, a circuit breaker, an alarm

and a secure radio release which is aached to the pilot

radio control.

The parachutes can be removed in a few seconds. The

centre of gravity of the Matrice 300 RTK is retained. Re-

dundancy of the parachutes for a totally infallible sys-

tem. The MATRICE 300 RTK returns to its starng po-

sion when the parachutes are released, to avoid the

breakage of an arm or landing gear.

TECHNICAL SPECIALISATIONS :

• Weight of the complete system: 710g

• Impact energy: 64 Joules

• Homologaon for 8kg

• Redundancy of the power cut-o electronics

• Double release buon on the remote control

• Encrypted frames (256-bit) - checksum to authencate the frame. Associaon in both direcons.

• Logs on micro-sd card in the remote control (text le readable by the user and unalterable containing:

date/me/min/sec, recepon quality, trigger requested by the user, trigger received by the receiver,

remote control acknowledgement, drone baery voltage, voltage and current passing through the 2

circuit breaker chips, and remote control baery voltage)

• Remote control autonomy of 40 hours (1800mAh lipo baery rechargeable by micro-USB)

• Auto power O (aer 30 minutes without connecon)

• Baery voltage display on the remote control (4 LEDs)

• Emergency power supply allowing parachutes to be triggered up to 1 minute aer a loss of UAV power

• Firmware update via micro-USB

• Securely turns the remote control on and o (like a DJI baery)

• Possibility to pair up to 4 remote controls per drone

USER MANUAL

TECHNICAL DESCRIPTION

Works properly from a height of 15 metres thanks to the pyrotechnic technology borrowed from microlight

aircra.

Very low coecient of penetraon in the air so that no vibraons are generated at high speed and thus a

perfectly stable image is maintained.

Reliable, robust and lightweight high-tech materials.

Assembly and disassembly of the system is feasible by the customer. The system does not alter the integrity

of the DJI MATRICE 300 RTK. The DJI manufacturer’s guarantee is retained. Fits in the original case of the

MATRICE 300 RTK.

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

FLYSAFE-M3 12/11/2020

CONTENT :

USER MANUAL

• 2 parachute containers

• 1 insert module le

• 1 right-hand spacer module

• 1 cradle (landing gear support)

• 2 load plugs

• 2 pyrotechnic charges

• 1 remote control

• 1 micro USB cable

• 1 baery latch

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

Radio control charge level :

To nd out the charge level, press the buon once.

«POWER», indicator lights appear.

Switching on :

To switch on the parachute radio control, press and hold the «POWER» buon. The le-hand light will light

up green, the rst right-hand light will light up red and will go out when the radio control is paired with the

drone’s internal receiver.

Triggering :

The parachute is released by pressing the 2 «FIRE» buons simultaneously.

USER MANUAL

PARACHUTE REMOTE CONTROL

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

FLYSAFE-M3 12/11/2020

USER MANUAL

Lighted Flashing light O

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

MODE OF OPERATION

Open the cover of dongle 4G.

Unscrew the two ring fastening screws (red arrow)

USER MANUAL

INSTALLATION OF PARACHUTE RADIO CONTROL

Remove the ring and posion it on the parachute remote

control, then screw it on.

Posion the parachute remote control on the

SmartController radio remote control: Aach the

ring and aim

Close the cover of dongle 4G.

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

FLYSAFE-M3 12/11/2020

USER MANUAL

INSTALLATION

Installaon of the parachute cradle :

In order to be able to posion the parachutes on the drone you must:

Unscrew the two landing gear supports

Posion the cradle in place and place the cradle under the drone. Fix it with the 4 screws on each

side (USB connector towards the front).

Installing the Baery Buery :

In order to be able to lock the baeries with

the presence of the circuit breakers, it is neces-

sary to change the baery locking buery.

Place an adhesive tape on each side of

the push piece under the throle valve to hold

it in place during disassembly.

Unscrew the central screw of the

throle valve: CAUTION with the washers, re-

move the screw and the throle valve.

Replace the screw in the new buery

valve, the washers and then screw.

Remove the adhesive tape.

Installaon of the pyrotechnic charges :

Before seng up the «parachute» containers, please

place the two pyrotechnic charges on each side of the

drone on the intended locaons (landing gear base, red

connector). Place the load correctly thanks to the two

lateral lugs.

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

Installaon of the circuit breaker modules :

To place the circuit-breaker modules on each side in the baery slots, insert them from the rear by sliding

them forwards.

Slide the modules all the way to the front as far as they will go to ensure a good connecon on the connec-

tor. The fuse modules can remain in place for storage in the M300 RTK case.

Installing the Parachute Pods :

Install the two «parachute» pods on each side of the drone by capping the pyro-

technic charges and screwing them ght.

Installaon of the drone baeries:

Install the two TB60 baeries normally by sliding them from the rear,

then lock them using the «buery» type rotang fastener.

USER MANUAL

FLYSAFE-M3 12/11/2020

Version 1.00

Hardware version 1.04

Tabla de contenidos

Manuales populares de Cuadricóptero de otras marcas

dji

dji MAVIC 2 PRO Manual de usuario

Autel Robotics

Autel Robotics EVO II Dual 640T Manual de usuario

Carson

Carson X4 NANO Manual de usuario

Attop

Attop W80 Manual de usuario

Alias

Alias 6608 Manual de usuario

Reely

Reely Drone Copter 2-in-1 Manual de usuario

Hubsan

Hubsan FPV X4 H107D Manual de usuario

Falcon

Falcon S2-210 Manual de usuario

Kaiser Baas

Kaiser Baas KBA15007 Manual de usuario

Denver Electronics

Denver Electronics DCH-261 Manual de usuario

Craig

Craig INTERCEPTOR Manual de usuario

Odyssey

Odyssey TURBO RUNNER Manual de usuario

IMAGINARIUM

IMAGINARIUM droni stream Manual de usuario

Hubsan

Hubsan X4 Pro FPV Manual de usuario

AR.Drone

AR.Drone Parrot VSM Manual de usuario

Walkera

Walkera QR X900 Manual de usuario

dji

dji Phantom 2 Vision + Manual de usuario

HobbyZone

HobbyZone Zugo Manual de usuario