Fluke Fiber OneShot PRO Manual de usuario
PN 3891247
March 2011
©2011 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
FIBER ONESHOT™PRO
Singlemode Fiber Troubleshooter
Users Manual
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Fluke Networks mainframe products will be free from defects
in material and workmanship for one year from the date of
purchase. Parts, accessories, product repairs and services are
warranted for 90 days, unless otherwise stated. Ni-Cad, Ni-MH
and Li-Ion batteries, cables or other peripherals are all
considered parts or accessories. This warranty does not cover
damage from accident, neglect, misuse, alteration,
contamination, or abnormal conditions of operation or
handling. Resellers are not authorized to extend any other
warranty on Fluke Networks’ behalf.
To obtain service during the warranty period, contact your
nearest Fluke Networks authorized service center to obtain
return authorization information, then send your defective
product to that Service Center with a description of the
problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE,
ARE EXPRESSED OR IMPLIED. FLUKE NETWORKS IS NOT LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY.
Since some states or countries do not allow the exclusion or
limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not
apply to you.
4/04
Fluke Networks
PO Box 777
Everett, WA 98206-0777
USA
SOFTWARE NOTICE
Copyright © 1986, 1988, 1991, 1993
The Regents of the University of California. All rights reserved.
© UNIX System Laboratories, Inc.
All or some portions of this file are derived from material licensed
to the University of California by American Telephone and
Telegraph Co. or Unix System Laboratories, Inc. and are
reproduced herein with the permission of UNIX System
Laboratories, Inc. Redistribution and use in source and binary
forms, with or without modification, are permitted provided that
the following conditions are met:
1
Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
3
Neither the name of the University nor the names of its
contributors may be used to endorse or promote products
derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
@(#)subr_prf.c 8.3 (Berkeley) 1/21/94
i
Contents
Introduction .................................................................................... 1
Registering Your Product.............................................................. 1
The Fluke Networks Knowledge Base......................................... 1
Safety Information ......................................................................... 2
Battery Installation and Life.......................................................... 4
Physical Features............................................................................. 4
Settings ............................................................................................ 8
The Connector Adapter................................................................. 9
How to Clean Connectors.............................................................. 10
How to Use a Mechanical Device ............................................ 10
How to Use Swabs, Wipers, and Solvent................................ 11
About Launch and Receive Fibers ................................................ 12
How to Use the Troubleshooter................................................... 13
How to Do Tests Through Attenuators....................................... 15
Measurement Results..................................................................... 15
Memory Functions.......................................................................... 20
How to See Saved Results......................................................... 20
How to Delete Saved Results ................................................... 23
Maintenance ................................................................................... 23
Contacting Fluke Networks........................................................... 24
Options and Accessories ................................................................ 25
Specifications................................................................................... 26
ii
FIBER ONESHOT PRO Users Manual
1
Introduction
The FIBER ONESHOT™PRO Singlemode Fiber Troubleshooter does
these tests to help you find incidents on singlemode fiber optic
cables:
•
Measures the length of singlemode fiber optic cables
•
Measures the distance to reflective and loss incidents
•
Measures the reflectance and loss of incidents
•
Maps the connections in singlemode fiber plants by
showing the number of incidents on the fiber and the
distance to each incident.
Registering Your Product
When you register your product with Fluke Networks you get
access to valuable information on updates, troubleshooting
procedures, and other support services.
To register online, go to www.flukenetworks.com/registration.
Or, send the registration card that came with this product to
Fluke Networks.
The Fluke Networks Knowledge Base
The Fluke Networks Knowledge Base gives answers to typical
questions about Fluke Networks products and includes
information on technology and procedures for network and
cable tests. To see the Knowledge Base, go to
www.flukenetworks.com, then click Customer Support >
Knowledge Base.
2
FIBER ONESHOT PRO Users Manual
Safety Information
WWarning: Class 1 Laser*
To prevent possible damage to your eyes caused by
hazardous radiation:
•
Do not look directly into optical connectors. Some
optical equipment emits invisible radiation that can
cause permanent damage to your eyes.
•
Do not turn on the troubleshooter unless a fiber is
attached to the port.
•
Do not use a magnifying device to look at the optical
outputs without the correct filter.
•
Use of controls, adjustments, or procedures that are
not in this manual can cause exposure to hazardous
radiation.
WCaution
To prevent damage to fiber connectors, to prevent
data loss, and to make sure that your test results are
as accurate as possible:
•
Do not connect APC connectors to the troubleshooter.
An APC connector will cause damage to the fiber
endface in the connector on the troubleshooter. See
Figure 3.
WWarning or Caution: Risk of damage to or destruction of
equipment or software. See explanations in the manual.
XWarning: Risk of electrical shock.
*Warning: Class 1 laser. Risk of damage to your eyes caused by
hazardous radiation.
~Do not put products that contain circuit boards into waste
containers. Refer to local regulations for disposal procedures.
3
Safety Information
•
Connect only UPC connectors to the troubleshooter.
Use only patch cords that comply with GR-326-CORE
specifications and have UPC connectors. Other patch
cords can cause unreliable measurements.
•
Use the correct procedures to clean all fiber connectors
before each test. If you do not do this or if you use
incorrect procedures, you can get unreliable test
results and can cause permanent damage to the
connectors.
•
Put protective caps on all connectors when you do not
use them.
•
Do not connect the troubleshooter to a network that
is on. If you do, the troubleshooter can cause problems
in the network.
•
If ACTIVE LINE blinks, immediately disconnect the
troubleshooter from the fiber. Optical power levels
more than +7 dBm can cause damage to the detector
in the troubleshooter.
•
The troubleshooter senses optical signals between
1310 nm and 1550 nm. If there might be signals at
other wavelengths on a fiber, use a different
instrument to make sure that the fiber is not active
before you connect the troubleshooter to the fiber.
4
FIBER ONESHOT PRO Users Manual
Battery Installation and Life
fjy03.eps
Figure 1. How to Install the Batteries
The troubleshooter can do approximately 1500 tests before you
must replace the batteries.
Physical Features
See Figure 2.
A
Output port with SC adapter and UPC endface
B
Starts a test
C
On/off key
D
Navigation keys
E
Press or hold down to enter and exit the setup menu. Press
to select an item, or to save a setting.
F
LCD display
AA
IEC LR6
NEDA 15A
Note: Fluke Networks recommends alkaline batteries.
Otros manuales para Fiber OneShot PRO
2
Tabla de contenidos
Otros manuales de Equipo de prueba de Fluke
Fluke
Fluke FLUKE-718 Manual de usuario
Fluke
Fluke 716 Manual de usuario
Fluke
Fluke 190-102/AM/S Manual de usuario
Fluke
Fluke CertiFiber Pro Manual de usuario
Fluke
Fluke 729 Manual de usuario
Fluke
Fluke TP1000 Instrucciones originales
Fluke
Fluke Micro-Bath 7102 Manual de usuario
Fluke
Fluke T50 Manual de usuario
Fluke
Fluke 1AC II VoltAlert Manual de usuario
Fluke
Fluke 5700A Series II Service Manual de usuario
Fluke
Fluke 753 Manual de usuario
Fluke
Fluke FIBER QUICKMAP Manual de usuario
Fluke
Fluke 726/FPC Manual de usuario
Fluke
Fluke 7526A-156 Manual de uso y cuidado
Fluke
Fluke 700G Series Manual de instrucciones
Fluke
Fluke 709 Manual de uso y cuidado
Fluke
Fluke 5730A Manual de usuario
Fluke
Fluke 714C Manual de usuario
Fluke
Fluke T90 Manual de usuario
Fluke
Fluke 1AC II VoltAlert Manual de usuario
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Mercury
Mercury TSL01 Manual de usuario
