Fluke PLS XLD Manual de usuario
XLD
Laser Detectors
Users Manual
December 2018 (English)
© 2018 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for three years from the date of purchase.
This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration,
contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other
warranty on Fluke’s behalf. To obtain service during the warranty period, contact your nearest Fluke authorized
service center to obtain return authorization information, then send the product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A
PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of
incidental or consequential damages, this limitation of liability may not apply to you.
11/99
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
ООО «Флюк СИАЙЭС»
125167, г. Москва,
Ленинградский проспект дом 37,
корпус 9, подъезд 4, 1 этаж
LIMITED WARRANTY AND LIMITATION OF LIABILITY
i
Table of Contents
Title Page
Introduction ........................................................................................................... 1
How to Contact Fluke............................................................................................ 1
Safety Information................................................................................................. 1
Product Familiarization ......................................................................................... 3
Features........................................................................................................... 3
Display ............................................................................................................. 4
Control Panel ................................................................................................... 5
Detection Accuracy.......................................................................................... 6
On Grade Measurements ..................................................................................... 6
Attach Rod Clamp............................................................................................ 6
Take Measurements ........................................................................................ 7
Maintenance ......................................................................................................... 8
Clean the Product ............................................................................................ 8
Batteries........................................................................................................... 9
Specifications........................................................................................................ 9
XLD
Users Manual
ii
1
Introduction
The XLD Rotary Laser Detector (the Detector or Product) senses red and green laser beams that may be difficult
to see with the human eye. The Detector is battery-powered and very portable. Use the Detector with the rod
clamp, a grade rod, and a red or green rotary laser level to identify new level and grade marks.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-921-0835
• Brazil: +55-11-3530-8901
• Anywhere in the world: +1-425-446-5500
Or, visit the PLS website at www.plslaser.com.
To view, print, or download the latest manual supplement, visit www.plslaser.com.
Safety Information
A Warning identifies conditions and actions that pose hazards to the user; a Caution identifies conditions and
actions that may damage the Product or the equipment under test.
W Warning
To prevent eye damage and personal injury:
• Read all safety information before you use the Product.
• Carefully read all instructions.
• Do not alter the Product and use only as specified, or the protection supplied by the Product
can be compromised.
• Do not use the Product if it operates incorrectly.
• Do not use the Product if it is altered or damaged.
XLD
Users Manual
2
• Batteries contain hazardous chemicals that can cause burns or explode. If exposure to
chemicals occurs, clean with water and get medical aid.
• Do not disassemble the battery.
• Repair the Product before use if the battery leaks.
• The battery door must be closed and locked before you operate the Product.
• Remove the batteries if the Product is not used for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not removed, battery leakage can damage the
Product.
• Replace the batteries when the low battery indicator shows to prevent incorrect
measurements.
• Be sure that the battery polarity is correct to prevent battery leakage.
• Use only Fluke approved power adapters to charge the battery.
• Do not short the battery terminals together.
• Do not disassemble or crush battery cells and battery packs.
• Do not keep cells or batteries in a container where the terminals can be shorted.
• Do not put battery cells and battery packs near heat or fire. Do not put in sunlight.
Table 1 is a list of the symbols that can be used on the Product or in this manual.
Table 1. Symbols
Symbol Description Symbol Description
Consult user documentation. Low battery indicator.
WWARNING. RISK OF DANGER Battery or battery compartment.
PConforms to European Union directives.
Conforms to relevant Australian Safety and EMC standards.
Conforms to relevant South Korean EMC Standards.
~
This product complies with the WEEE Directive marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic household
waste. Product Category: With reference to the equipment types in the WEEE Directive
Annex I, this product is classed as category 9 "Monitoring and Control Instrumentation"
product. Do not dispose of this product as unsorted municipal waste.
Laser Detectors
Product Familiarization
3
Product Familiarization
Features
Table 2 shows the features of the Product.
Table 2. Features
Item Description Function
Control panel Multiple functions. See Control Panel.
Bubble level Shows the horizontal position of the Product.
On grade offset notch Use to transfer reference marks 41 mm from the top edge of
the detector.
DDisplay See Display.
EGrade indicator LEDs Indicates when the detector is too high, too low, or on grade.
FLaser beam reception window Detects a laser beam when faced towards a laser.
GRod clamp guides and screw
thread Use to attach the clamp to the Detector.
HMagnets Use to attach the Detector to a magnetic metal surface.
IBeeper speaker Emits sound when the beeper is activated.
JBattery door Secures the battery.
KRod clamp Secures the clamp to the Detector and a measuring rod or staff.
XLD
2
3a
4a
6
4b
9
10
5
3b
8
11
1
7
XLD
Users Manual
4
Display
Table 3 shows the items on the display.
Table 3. Display
Item Description
Battery level status
Numeric or text display
High grade arrows. Shows when the detector is too
high and needs to be lowered.
DOn grade indicator
ELow grade arrows. Shows when the detector is too
low and needs to be raised.
FBeeper on or off status
GLaser beam detection accuracy status. See Detection
Accuracy.
2
3
4
1
5
6
7
Laser Detectors
Product Familiarization
5
Control Panel
Table 4 lists the functions of buttons on the control panel.
Table 4. Control Panel
Description Function
Power Push once to turn on the Product.
Push and hold for ≥2 seconds to turn off the Product.
Detection accuracy
Push once to view the current detection accuracy setting and units of measure.
Push twice quickly to change the detection accuracy setting. For available
options, see Detection Accuracy.
The detection accuracy numerical value and units of measure briefly show at the top of
the display.
Detection units of
measure
Push + at the same time to change the units of measure. For available
options, see Detection Accuracy.
The detection accuracy numerical value and unit of measure briefly show at the top of
the display.
Beeper volume
With the Product on, push to select the beeper volume. You can select Low, Hi,
or OFF.
The volume level briefly shows at the top of the display.
shows on the bottom of the display when the beeper volume is set to Low or Hi.
Grade indicator LEDs
Push and hold for ≥2 seconds to turn on or turn off the grade indicator lights.
All three grade indicator lights flash briefly.
With the grade indicator lights enabled, when the laser beam reception window
detects a laser beam:
The top LED lights when the Detector is too high and needs to be lowered.
The bottom LED lights when the Detector is too low and needs to be raised.
The middle LED lights when the Detector is on grade.
XLD
Users Manual
6
Detection Accuracy
You can set the detection accuracy and units of measure. The numerical value of the detection accuracy
depends on the measurement units. See Table 5.
On Grade Measurements
Use the Detector with the rod clamp, a grade rod, and a red or green rotary laser level to identify new level and
grade marks.
Attach Rod Clamp
Table 6 shows the features of the rod clamp.
Table 5. Detection Accuracy
Fine Medium Course
Fractional inches (F.in)1/8 1/4 1/2
Millimeters (mm)1.02.05.0
Centimeters (cm)0.10.20.5
Inches (in) 0.05 0.1 0.2
Table 6. Rod Clamp
Item Description Function
Alignment points Use to secure and align the rod clamp to the Detector.
Rod clamp screw Turn clockwise to attach the clamp to the Detector.
Reference indicators Align with the on-grade marks on the Detector for grade
rod readings.
DClamp screw knob Secures the clamp to a measuring rod or staff.
4
1
4
3
2
Tabla de contenidos
Otros manuales de Sensor de seguridad de Fluke
Fluke
Fluke Amprobe UAT-620 Manual de instrucciones
Fluke
Fluke 26500090 Manual de instrucciones
Fluke
Fluke FiberInspector Pro FI-7000 Manual de usuario
Fluke
Fluke TS 90 Manual de usuario
Fluke
Fluke TNT 12000 DoseMate Manual de usuario
Fluke
Fluke PLS SLDR Manual de usuario
Fluke
Fluke LDR Manual de usuario
Fluke
Fluke ClirVu CV200 Manual de usuario
Fluke
Fluke PRUFTECHNIK DBS30 Manual de usuario
Fluke
Fluke C9970 Manual de usuario
