Fluke Premium 3 Manual de usuario

Network Time Machine

Quick Start Guide: Premium 3 Model

Your Network Time Machine (NTM) comes with the software already installed and licensed.

After you have unpacked it from its shipping container, proceed as follows:

1. Install the NTM in a 19-inch rack.

2. Connect cables as shown in the figure below.

3. Turn on AC power to the storage units. Wait until all the green front panel LEDs on the disk

drives have stopped flashing (up to 3 minutes). Then turn on the processor unit.

4. When the Windows 2008 server login screen appears, login with username operator and

password ClearSight1.

5. Start the NTM application by selecting Start > All Programs > ClearSight Distributed >

ClearSight Network Time Machine Distributed Agent Manager.

6. After it launches, add the Agent:

!Host: localhost

!Username: Admin

!Password: (leave blank)

7. Connect to the Agent.

If you are using a 1 Gbps adapter, the ports will look like this:

Connect a USB

keyboard and

mouse here.

Connect the power

cables here.

Connect these Ethernet

ports to the network(s)

from which you want to

monitor, capture frames,

and perform analysis.

Connect a

monitor here.

Connect one of these

Ethernet ports to your

control network for remote

operation of this NTM.

Connect the processor to the

storage array using the black SAS

cable.

Processor Unit StorageUnits

If you are using a 10 Gbps adapter, the ports will look like this:

Contacting Fluke Networks

www.flukenetworks.com

[email protected]

+1-425-446-4519

•Australia: 61 (2) 8850-3333 or 61 (3) 9329 0244

•Beijing: 86 (10) 6512-3435

•Brazil: 11 3759 7600

•Canada: 1-800-363-5853

•Europe: +31-(0) 40 2675 600

•Hong Kong: 852 2721-3228

•Japan: 03-6714-3117

•Korea: 82 2 539-6311

•Singapore: 65-6799-5566

•Taiwan: (886) 2-227-83199

•USA: 1-800-283-5853

•Anywhere in the world: +1-425-446-4519

Visit our website for a complete list of phone numbers.

Connect a USB

keyboard and

mouse here.

Connect the power

cables here.

Connect these Ethernet

ports to the network(s)

from which you want to

monitor, capture frames,

and

erform anal

sis.

Connect a

monitor here.

Connect one of these

Ethernet ports to your

control network for remote

operation of this NTM.

Connect the processor to the

storage array using the black SAS

cable.

Processor Unit Stora

eUnits

Otros manuales de Hardware de red de Fluke

Fluke

Fluke STAP-BT-4X16 Manual de usuario

Fluke

Fluke TAP-1000BT-BT Manual de usuario

Fluke

Fluke Visual UpTime Select 807-0115 Manual de usuario

Fluke

Fluke AXTAP1204BT-BT Manual de usuario

Fluke

Fluke SimpliFiber Pro Manual de usuario

Fluke

Fluke TAP-DS3E3 Manual de usuario

Fluke

Fluke TAP-T1E1 Manual de usuario

Fluke

Fluke TAP-100-2X16 Instrucciones de instalación

Fluke

Fluke NetDAQ 2640A Manual de usuario

Fluke

Fluke OneTouch AT Manual de usuario

Fluke

Fluke TAP-1000BT-SX Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario