Fluidwell F127-P-EL-TA Manual de usuario

F127-P-EL-TA

DIFFERENTIAL FLOW COMPUTER

FOR CORRECTED LIQUID VOLUME

Signal input flowmeter: pulse, namur and coil.

Signal input temperature: (0)4-20mA.

Signal outputs: 4-20mA ref. corrected flowrate.

Options: Intrinsically Safe, Modbus communication.

F-Series - Field mounted indicators for safe and hazardous areas. More info: www.fluidwell.com/fseries

HF127PEN_EL_TA_v0501_04

Page 2

SAFETY INSTRUCTIONS

Any responsibility is lapsed if the instructions and procedures as described in this

manual are not followed.

LIFE SUPPORT APPLICATIONS: The F127-P-EL is not designed for use in life support

appliances, devices, or systems where malfunction of the product can reasonably be

expected to result in a personal injury. Customers using or selling these products for use

in such applications do so at their own risk and agree to fully indemnify the manufacturer

and supplier for any damages resulting from such improper use or sale.

Electro static discharge does inflict irreparable damage to electronics! Before installing

or opening the unit, the installer has to discharge himself by touching a well-grounded

object.

This unit must be installed in accordance with the EMC guidelines (Electro Magnetic

Compatibility).

Do connect a proper grounding to the aluminum casing as indicated if the F127-P-EL has

been supplied with the 115-230V AC power-supply type PM. The green / yellow wire

between the back-casing and removable terminal-block may never be removed.

Intrinsically Safe applications: follow the instructions as mentioned in Chapter 5 and

consult “Fluidwell F1..-..-XI - Documentation for Intrinsic Safety”.

DISPOSAL

At the end of its life this product should be disposed of according to local regulations regarding

waste electronic equipment. If a battery is present in this product it should be disposed of

separately. The separate collection and recycling of your waste equipment will help to conserve

natural resources and ensure that it is recycled in a manner that protects the environment.

SAFETY RULES AND PRECAUTIONARY MEASURES

The manufacturer accepts no responsibility whatsoever if the following safety rules and

precautions instructions and the procedures as described in this manual are not followed.

Modifications of the F127-P-EL implemented without preceding written consent from the

manufacturer, will result in the immediate termination of product liability and warranty period.

Installation, use, maintenance and servicing of this equipment must be carried out by authorized

technicians.

Check the mains voltage and information on the manufacturer's plate before installing the unit.

Check all connections, settings and technical specifications of the various peripheral devices

with the F127-P-EL supplied.

Open the casing only if all leads are free of potential.

Never touch the electronic components (ESD sensitivity).

Never expose the system to heavier conditions than allowed according to the casing

classification (see manufacture's plate and chapter 4.2.).

If the operator detects errors or dangers, or disagrees with the safety precautions taken, then

inform the owner or principal responsible.

The local labor and safety laws and regulations must be adhered to.

HF127PEN_EL_TA_v0501_04

Page 3

ABOUT THE OPERATION MANUAL

This operation manual is divided into two main sections:

The daily use of the unit is described in chapter 2 "Operation". These instructions are meant for

users.

The following chapters and appendices are exclusively meant for electricians/technicians. These

provide a detailed description of all software settings and hardware installation guidance.

This operation manual describes the standard unit as well as most of the options available. For

additional information, please contact your supplier.

A hazardous situation may occur if the F127-P-EL-TA is not used for the purpose it was

designed for or is used incorrectly. Please carefully note the information in this operating

manual indicated by the pictograms:

A "warning" indicates actions or procedures which, if not performed correctly, may lead to

personal injury, a safety hazard or damage of the F127-P-EL-TA or connected instruments.

A "caution" indicates actions or procedures which, if not performed correctly, may lead to

personal injury or incorrect functioning of the F127-P-EL-TA or connected instruments.

A "note" indicates actions or procedures which, if not performed correctly, may indirectly

affect operation or may lead to an instrument response which is not planned.

Hardware version : 02.01.xx

Software version : 02.05.xx

Manual : HF127PEN_EL_TA_v0501_04

Information in this manual is subject to change without prior notice. The

manufacturer is not responsible for mistakes in this material or for incidental

damage caused as a direct or indirect result of the delivery, performance or

use of this material.

in any form or by any means without written permission of your supplier.

HF127PEN_EL_TA_v0501_04

Page 4

CONTENTS MANUAL

Safety instructions ........................................................................................................................................... 2

Safety rules and precautionary measures ....................................................................................................... 2

About the operation manual ............................................................................................................................ 3

1. Introduction ................................................................................................................................. 5

1.1. System description of the F127-P-EL .................................................................................... 5

2. Operational.................................................................................................................................. 7

2.1. General .................................................................................................................................. 7

2.2. Control panel.......................................................................................................................... 7

2.3. Operator information and functions ....................................................................................... 8

3. Configuration............................................................................................................................... 9

3.1. Introduction ............................................................................................................................ 9

3.2. Programming SETUP-level.................................................................................................... 9

3.2.1. General .................................................................................................................................. 9

3.2.2. Overview functions SETUP level ......................................................................................... 12

3.2.3. Explanation OF SETUP-functions........................................................................................ 13

1 - Total A ...................................................................................................................... 13

2 - Flowrate A................................................................................................................. 14

3 - Total B ...................................................................................................................... 15

4 - Flowrate B................................................................................................................. 15

5 - Display ....................................................................................................................... 16

6 - Power management .................................................................................................. 17

7 - Flowmeter .................................................................................................................. 17

8 - Temperature - A........................................................................................................ 18

9 - Temperature - B........................................................................................................ 20

A - Formula ..................................................................................................................... 21

B - Analog output ............................................................................................................ 22

C - Communication (optional) ......................................................................................... 23

D - Others ....................................................................................................................... 23

4. Installation ................................................................................................................................. 24

4.1. General directions................................................................................................................ 24

4.2. Installation / surrounding conditions .................................................................................... 24

4.3. Dimensions- Enclosure ........................................................................................................ 25

4.4. Installing the hardware......................................................................................................... 27

4.4.1. Introduction .......................................................................................................................... 27

4.4.2. Voltage selection sensor supply .......................................................................................... 28

4.4.3. Terminal connectors ............................................................................................................ 29

5. Intrinsically safe applications..................................................................................................... 35

5.1. General information and instructions ................................................................................... 35

5.2. Terminal connectors Intrinsically Safe applications ............................................................. 36

5.3 Configuration Examples....................................................................................................... 38

5.4 Battery replacement instructions.......................................................................................... 40

6. Maintenance.............................................................................................................................. 41

6.1. General directions................................................................................................................ 41

Appendix A: Technical specification .............................................................................................................. 42

Appendix B: Problem solving......................................................................................................................... 45

Appendix C: Communication variables.......................................................................................................... 46

Index of this manual....................................................................................................................................... 50

List of figures in this manual .......................................................................................................................... 50

HF127PEN_EL_TA_v0501_04

Page 5

1. INTRODUCTION

1.1. SYSTEM DESCRIPTION OF THE F127-P-EL

Functions and features

The flowcomputer Model F127-P-EL is a microprocessor driven instrument for the calculation of

standard volumetric flow or mass flow for differential flow measurement applications using flow

equations.

This product has been designed with a focus on:

ultra-low power consumption to allow long-life battery powered applications (option PB),

intrinsic safety for use in hazardous applications (option XI),

several mounting possibilities with ABS or aluminum enclosures for harsh industrial

surroundings,

ability to process all types of flowmeter signals,

transmitting possibilities with analog and communication (option) outputs.

Flowmeter and temperature input

This manual describes the unit with a pulse type input from the flowmeter "-P version".

Two flowmeters with a passive or active pulse, Namur or coil signal output can be connected to the

F127-P-EL. To power the sensor, several options are available.

This unit has two analog (0)4-20mA temperature inputs “-TA version ”. Other versions are available

to process 0-10V or PT100 temperature signals.

Standard output

Configurable passive linear 4-20mA analog output with 10-bits resolution mirroring the

calculated differential flowrate at standard conditions. Flowrate levels as well as the minimum

and maximum signal output can be tuned.

Fig. 1: Typical application for the F127-P-EL.

HF127PEN_EL_TA_v0501_04

Page 6

Configuration of the unit

The F127-P-EL was designed to be implemented in many types of applications. For that reason, a

SETUP-level is available to configure your F127-P-EL according to your specific requirements.

SETUP includes several important features, such as K-factors, Span, measurement units, signal

selection etc. All setting are stored in EEPROM memory and will not be lost in the event of power

failure or a drained battery.

To extend the battery-life time (option), please make use of the power-management functions as

described in chapter 3.2.3.

Display information

The unit has a large transflective LCD with all kinds of symbols and digits to display measuring units,

status information, trend-indication and key-word messages.

Flowrate and totals can be displayed either with the small 8mm digits or with the 17mm digits.

A backup of the total and accumulated total in EEPROM memory is made every minute.

Options

The following options are available: isolated or active 4-20mA / 0-10V / 0-20mA analog output, full

Modbus communication RS232/485 (also battery powered), intrinsic safety, power- and sensor-

supply options, panel-mount, wall-mount and weather-proof enclosures, flame proof enclosure.

Important: for Model F127-P-EL-TA, option PM (80-230V AC power supply) is not available.

HF127PEN_EL_TA_v0501_04

Page 7

2. OPERATIONAL

2.1. GENERAL

The F127-P-EL may only be operated by personnel who are authorized and trained by

the operator of the facility. All instructions in this manual are to be observed.

Take careful notice of the " Safety rules, instructions and precautionary measures " in

the front of this manual.

This chapter describes the daily use of the F127-P-EL. This instruction is meant for users /

operators.

2.2. CONTROL PANEL

The following keys are available:

Fig. 2: Control Panel.

Functions of the keys

This key is used to program and save new values or settings.

It is also used to gain access to SETUP-level; please read chapter 3.

This key is used to SELECT accumulated total and temperature.

The arrow-key is used to increase a value after PROG has been pressed

or to configure the unit; please read chapter 3.

Press this key twice to CLEAR the value for total.

The arrow-key is used to select a digit after PROG has been pressed or to

configure the unit; please read chapter 3.

HF127PEN_EL_TA_v0501_04

Page 8

2.3. OPERATOR INFORMATION AND FUNCTIONS

In general, the F127-P-EL will always function at Operator level. The information displayed depends

upon the SETUP-settings. All pulses generated by the connected flowmeter are measured by the

F127-P-EL in the background, whichever screen refresh rate setting is chosen. After pressing a key,

the display will be updated quickly during a 30 second period, after which it will slow down again.

Fig. 3: Example of display information during process.

For the Operator, the following functions are available:

Display calculated differential flowrate and calculated differential total

This is the main display information of the F127-P-EL. After selecting any other information, it

will always return to this main display automatically.

Total is displayed on the upper-line of the display and flowrate on the bottom line.

It is possible to display flowrate only with the large 17mm digits; in this instance press the

SELECT-key to read the total. When "-------" is shown, then the flowrate value is too high to be

displayed. The arrows indicate the increase/decrease of the flowrate trend.

If the consumption is very low, it might be that a stable low flowrate is displayed and and a

stable totalisation; this is due to the settings of the unit.

Clear total

The value for total can be re-initialized. To do so, press CLEAR twice. After pressing CLEAR

once, the flashing text "PUSH CLEAR" is displayed. To avoid re-initialization at this stage,

press another key than CLEAR or wait for 20 seconds.

Re-initialization of total DOES NOT influence the accumulated total.

Display calculated differential accumulated total

When the SELECT-key is pressed, total and accumulated total are displayed. The

accumulated total cannot be re-initialized. The value will count up to 99,999,999,999. The unit

and number of decimals are displayed according to the configuration settings for total.

Display line temperature and calculated flowrate INLET / OUTLET

After pressing SELECT, the actual INLET / OUTLET temperature is displayed at the top line

of the display. At the bottom line, the calculated INLET / OUTLET flowrate is displayed

together with the measuring units for flowrate and temperature.

Low-battery alarm

When the battery voltage drops, it must be replaced. At first "low-battery" will flash, but as

soon as it is displayed continuously, the battery MUST be replaced shortly after!

Only official batteries may be used, or else the guarantee will be terminated. The remaining

lifetime after the first moment of indication is generally several days up to some weeks.

Fig. 4: Example of low-battery alarm.

Alarm 01-03

When "alarm" is displayed, please consult Appendix B: problem solving.

HF127PEN_EL_TA_v0501_04

Page 9

3. CONFIGURATION

3.1. INTRODUCTION

This and the following chapters are exclusively meant for electricians and non-operators. In these,

an extensive description of all software settings and hardware connections are provided.

Mounting, electrical installation, start-up and maintenance of the instrument may only

be carried out by trained personnel authorized by the operator of the facility. Personnel

must read and understand this Operating Manual before carrying out its instructions.

The F127-P-EL may only be operated by personnel who are authorized and trained by

the operator of the facility. All instructions in this manual are to be observed.

Ensure that the measuring system is correctly wired up according to the wiring

diagrams. The housing may only be opened by trained personnel.

Take careful notice of the " Safety rules, instructions and precautionary measures " in

the front of this manual.

3.2. PROGRAMMING SETUP-LEVEL

3.2.1. GENERAL

Configuration of the F127-P-EL is done at SETUP-level. SETUP-level is reached by pressing the

PROG/ENTER key for 7 seconds; at which time, both arrows will be displayed. In order to return

to the operator level, PROG will have to be pressed for three seconds. Alternatively, if no keys are

pressed for 2 minutes, the unit will exit SETUP automatically.

SETUP can be reached at all times while the F127-P-EL remains fully operational.

Note: A pass code may be required to enter SETUP. Without this pass code access to SETUP is

denied.

To enter SETUP-level:

HF127PEN_EL_TA_v0501_04

Page 10

Matrix structure SETUP-level:

SCROLLING THROUGH SETUP-LEVEL

Selection of function-group and function:

SETUP is divided into several function groups and functions.

Each function has a unique number, which is displayed below the word "SETUP" at the bottom of

the display. The number is a combination of two figures. The first figure indicates the function-group

and the second figure the sub-function. Additionally, each function is expressed with a keyword.

After selecting a sub-function, the next main function is selected by scrolling through all "active" sub-

functions (e.g. 1, 11, 12, 13, 14, 1, 2, 3, 31 etc.).

Otros manuales para F127-P-EL-TA

Tabla de contenidos

Otros manuales de De oficina de Fluidwell

Fluidwell

Fluidwell F126-P-EG-IA-TP Manual de usuario

Manuales populares de De oficina de otras marcas

HP m9060n - Pavilion - Elite Hoja de especificaciones

Asus

Asus E210 Series Manual de usuario

Dell

Dell Inspiron 600m Manual de usuario

Dell

Dell Inspiron 3662 Manual de usuario

TotalFlow

TotalFlow uFLO Manual de usuario

HP Presario SV7000 - Desktop PC Manual de usuario

HP ProDesk 400 G5 Manual

Logitech

Logitech MK320 Manual de usuario

Dell

Dell XPS 730 H2C Manual de usuario

Sony

Sony Vaio Series Manual de usuario

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manual de usuario

Alto

Alto MD 250 Manual de usuario

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series Manual de usuario

Sony

Sony VAIO VGX-TP1 Series Manual de usuario

Asus

Asus Eee Box B204 Manual de usuario

Dell

Dell Optiplex 9010 All In One Manual de usuario