The Fluid Life Corporation Revised March 28, 2008
WinRoast Bar Code System Setup and User Guide
8
Printing Labels for Sample Containers
Sample Label Batches Command (Utilities Menu)
Displays the sample label batches window. This window shows all setup and
sent samples currently in the database. Any setup or sent samples that haven’t
had their corresponding sample labels printed yet will be under the Batch named:
Unprinted Labels. A few or all these samples can be selected to print. Once
printed, a new batch is named to match the present date. This indicates the
samples are a batch and were printed on that date. Any samples that have
already been printed can be re-printed.
Go to Utilities->Sample Label
Batches and select the setup
samples that require printed
labels. After the selections are
made press “Print All” or “Print
Selected”.
This in turn pulls up Report
Writer with a print dialog and it
should default to the DYMO
LabelWriter printer driver. Print
the labels as needed. The
report definition for the layout of
the labels is in the file
“dymolabel.rpd” and can be
modified to suit any specific
needs.
Apply labels before taking
samples. Make sure adhesive
label is properly affixed to the
sample jar before sampling. Use
guides provided by Fluid Life to
take a good sample.
