Florite 990X Guía de configuración
D10137-012809
Florite International, Inc.
Model 990X Instrument Training Guide
Instrument Training Guide
Model 990X
P ro c e s s C o ntr o l b y De s i gn
1.0 Product Introduction
1.1 The System
The 990x is a versatile full-featured measurement and control instrument - with precision multiple port and
channel capabilities. Its operating control primarily supports point-n-click navigation.
It supports an optional mix of up to eight independent full function input measurement ports and advanced
technology output ports. Extensive local and remote information communication is provided.
Superior technology is combined with operating simplicity, versatility and ruggedness. Easy to install -
and easy to operate. An extensive open architecture enables a wide range of special operating
capabilities organized to meet the needs of nearly any high-accuracy precision measure, process, alarm
monitoring and communication application requirements.
1.2 The Technology
The system is all digital based on microcomputer technology - no power switch to be left off, no feature
selection switches or jumpers, no analog trimming potentiometers. Just all digital.
It employs surface mount technology and incorporates a powerful package of floating-point digital signal
processing arithmetic. Built-in test capabilities enable simple installation, and extensive self-tests insures
long term operating reliability. The rugged package is modular - and represents an ideal solution for use
in demanding applications and tough environments. Mounting options are available for rack-panel, desk-
top with support for various input and output signal types.
1.3 The Applications
This system suits applications requiring advanced multiple port and channel, supported by extensive
integrated information communication capabilities. It services nearly all process and sensor signal
measurements for manufacturing and batch processing, proportional blending, machine control, bio-
medical pressure and temperature, chemical and pharmaceutical, laboratory, ecologic, agriculture,
petroleum, heating and air conditioning, water filtration and purification, beverage and fluid delivery,
automatic billing systems, asset accounting and service programs, performance tracking and verification,
quality assurance programs, operations and maintenance management information gathering, regulatory
compliance, liability mitigation, and public safety programs.
1.4 The Organization
The system has port based architecture, modularly organized as independent ports, or ports combined as
channels, to meet present and future instrumentation requirements.
The systems ports support universal input and output signal types. Ports may be intermixed to support an
extremely wide variety of signal service requirements.
Input ports provide value measurements for quantity accumulation, rate measurements, scalar
measurements, supported by value scaling for process frequency, pulse, voltage, current or resistance
signals.
Independent value scaling and smoothing filters compensate for specific signal service requirements.
Signal acquisition uses digital signal processing to reject ambient noise and interference. Programmable
excitation selections are available to power most sensors. Advanced signal output ports provide
extremely stable voltages, currents, and supports isolated relay contacts.
1.5 Communication
The communication facilities provide data acquisition, command and control functions, and support
information gathering and reporting, and alarm signaling. It has a built-in EIA-TIA232 standard interface,
and is optionally configurable for EIA-TIA485 two wire multi-drop LAN operations. Wide Area Networking
is supported by optional built-in modem, or optional 10/100 BaseT Ethernet.
WAN capabilities support collision avoidance and error control capabilities, and may be user set with
multiple destination address used to send information to multiple computer. Communication is initiated by
command (solicited), alarms (unsolicited), and real-time scheduled reporting using its internal Y2K
compliant date-time clock.
1.6 Alarm Monitoring
Independent user-programmable alarm threshold limits are available for every measured value. Included
in each port are two independent quantity accumulators, scalar value, process rate and service time.
Alarms are programmable to activate local annunciation, local display alert, and drive relay or analog
output, instigate local and remote computer communication.
1.7 Process Controls
Batch delivery, proportional blending, and closed loop PID control are readily achieved using either the
front panel key controls or serial commands.
1.8 Operator Controls
The instrument has no power switch to be accidentally turned off. Operation may be completely controlled
from its integral eight key pad used to view operation and programmed operation values. Key activations
are single touch and repeat when the key is held. The key pad provides front panel splash proofing and
environment protection.
1.9 Operator Indicators
The primary indicator is a large variable-brightness back lit liquid crystal graphic display - visible at a
distance even in low light conditions for value viewing, programming, process state information, and
alarm status. A built-in audio indicator annunciates alarm conditions and key activations.
1.10 Diagnostic Capabilities
Powerful automatic built-in tests support easy installation and ensure a long, trouble-free operating life.
Tests include scans of all memory facilities, peripheral input-output status, communication adapter status,
clock and data logging operation, keypad tests, and proper operation of the display and audio indicator.
1.11 Table of Contents
Section Title
_________ _________________________________________
1.0 Product Introduction
1.1 The System
1.2 The Technology
1.3 The Applications
1.4 The Organization
1.5 Communication
1.6 Alarm Monitoring
1.7 Process Controls
1.8 Operator Controls
1.9 Operator Indicators
1.10 Diagnostic Capabilities
1.11 Table of Contents
1.12 Revision History
2.0 Installation
Signal Wiring
Accessories
3.0 Indicators
3.1 Normal home screen fields
3.2 Home Screen Alarm Fields
4.0 System Controls
4.1 Navigate Controls
4.2 Operation Controls
5.0 Navigation
5.1 System Navigate Map
5.2 Menu Selection
6.0 Process Value Set-Points
6.1 PV Measures
6.2 PV Programming
6.3 SP Status
6.4 SP Programming
7.0 Global Settings
7.1 Information Screen
7.2 System Power Control
7.3 Control Service Screen
7.4 Communication Screen
7.5 Date-Time Screen
7.6 Data Logging Screen
8.0 Process Controls
8.1 Manual Set-Point
8.2 Batch Delivery
8.3 Proportional Blending
8.4 Monitor
8.5 Proportional-Integral-Differential (PID)
9.0 Notices
9.1 Medical Alert
9.2 FCC Compliances
9.3 EU Compliances
9.4 Copy Rights
9.5 Hazardous Wastes
9.6 Legal Notices
1.12 Revision History
Effective Date Revision Enhancement
05Jul2007 1. Initial assembly of documents and organization
20Nov2007 1. Completion of pictorials
05Dec2007 1. Complete initial section text coordinated with pictorials
11Dec2007 1. Initial release revision complete - serial protocol exception
28Jan2008 1. Revised calibrate section pictorials
28Jan2009 1. General publication release
2.0 Installation and Accessories
This section describes the various system electrical wiring requirements, and provides information on the various
available mounting accessories including table top, panel and rack.
Tabla de contenidos
