Floe V2602 LENGTH BUNKS Manual de usuario

FLOE V

2602 DOUBLE PWC 119”

LIFT

P/N 511-26080-00

WITH PATENTED EASY LEVEL LEG SYSTEM

ASSEMBLY INSTRUCTIONS

Floe International Inc.

48473 State Hwy. 65

McGregor, MN 55362

www.floeintl.com

Instructions P/N 611

26080

Issued 01/14/19

Required Tools

Card Contents (511-04265-00)

Step

Part Numbers

QTY Descriptions Torques

001-70215-00

001-70217-00

001-70210-00

001-70219-00

001-71023-00

001-76072-00

HHCS, 1/2-13 x 3” SS 18-8

HHCS, 1/2-13 x 3 1/2” ss 18-8

HHCS, 1/2-13 x 1 3/4” ss 18-8

HHCS, 1/2-13 x 4” ss 18-8

FLAT WASHER, .5 ID x .75 OD ss

NUT, 1/2-13 ALUMINUM NYLOCK

60 ft. lbs.

45 ft. lbs.

60 ft. lbs.

001-70218-00

001-76072-00

HHCS, 1/2-13 x 3 3/4” ss 18-8

NUT, 1/2-13 ALUMINUM NYLOCK

25 ft. lbs.

001-76071-00

001-70115-00

001-70117-00

NUT, 3/8-16 ALUMINUM NYLOCK

HHCS, 3/8-16 x 3” ss 18-8

HHCS, 3/8-16 x 3 1/2” ss 18-8

35 ft. lbs.

001-70209-00

001-76350-00

HHCS, 1/2-13 x 1 1/2” ss 18-8

NUT, 1/2-13 ALUMINUM

45 ft. lbs.

001-70211-00

001-76072-00

002-04140-00

007-06201-00

HHCS, 1/2-13 x 2” ss 18-8

NUT, 1/2-13 ALUMINUM NYLOCK

HOLDER, CABLE

SHEAVE, 3” FRONT CABLE ½” ID

45 ft. lbs.

IMPORTANT NOTE:

DO NOT USE IMPACT WRENCH

WHEN ADJUSTING THE EASY

LEVEL LEGS

Warnings

Tips



Torque nuts to specification, not bolts.

 Place parts and fasteners in designated locations prior to each step.

 Before tightening fasteners to specified torque, ensure that the lift is square.

 Measure from corner to corner (A to C/B to D) to verify that the lift is square.

 Measure distance between corner posts (A to B, B to C, C to D, A to D) above frame beam and at

the top of the corner post to verify that the lift is square.

 Ensure that the lift is level and square before proceeding to install the V-Brace.

 Assemble cradle clamps with given bolt and nut before installing onto cradle beam.

 Use a marker to denote fasteners which have been tightened to the specified torque.



Read instructions and understand them before attempting assembly.

Lift Dimensions

Length: 66”

Width: 134 3/8”

Height: 104”

Work Space

Level work space

Allow space to organize parts

Material

Blocking may be anything 10”-15” in height.

(5-gallon bucket, jack stands, blocks, saw horses)

QTY

4 (2 for each side)

Purpose

Blocking used to support lift during assembly steps

1 and 2

Pre-Assembly Prep

Contents for Step 1

(24) 1/2” Alum. Nylock Nuts

(2) 1/2 x 4” ss Bolts

(8) 1/2 x 3 1/2” ss Bolts

(6) 1/2 x 3” ss Bolts

(8) 1/2 x 1 3/4” ss Bolts

(48) 1/2” ID x 7/8” OD ss Washers

NOTE

(2) ½” Nuts and (2)

½” Washers are used

in Step 5-A to attach

lifting cables to (2)

½” x 4” Bolts

NOTE

ALL FASTENERS IN

STEP 1 ARE HAND-

TIGHTENED ONLY.

Assembly for Step 1

NOTE

(2) ½” Nylock Nuts

and (2) ½” Washers

ARE NOT used for (2)

½” x 4” Bolts on

corners A and D until

Step 6-D.

IMPORTANT NOTE:

FRAME BEAMS MUST

BE IN THIS

ORIENTATION

BEFORE CONTINUING.

FRONT/REAR

Contents for Step 2

(

4) 1/2” Alum. Nylock Nuts

(

) 1/2 x

3 3/4

” ss Bolts Torque to

ft. lbs.

Otros manuales para V2602 LENGTH BUNKS

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de elevación de Floe

Floe

Floe VSD 5000 Manual de usuario

Floe

Floe VSD Manual de usuario

Floe

Floe PWC1300 Manual de usuario

Floe

Floe V2600-VSD5000 Manual de usuario

Floe

Floe VSD6500 Instrucciones de funcionamiento

Floe

Floe P1200 Manual de usuario

Floe

Floe VSD 3800 Manual de usuario

Floe

Floe 3800 Manual de usuario

Floe

Floe V-3600 Manual de usuario

Floe

Floe VSD7500 Manual de usuario

Floe

Floe VSD 5000 Manual de usuario

Floe

Floe VSD 6000 Manual de usuario

Floe

Floe PWC1300 Manual del operador

Floe

Floe V-2000 Manual de usuario

Floe

Floe P-1600 Manual de usuario

Manuales populares de Sistema de elevación de otras marcas

morse

morse 82H-124 Manual de usuario

Braun

Braun NL955 Series Manual de usuario

haacon

haacon 1889.10 Manual de usuario

Protekt

Protekt AT 252 Manual de usuario

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manual de usuario

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manual de usuario

Genie

Genie Z-60/34 Manual de usuario

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manual de usuario

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manual de usuario

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manual de programación

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manual de programación

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manual de programación

BERG

BERG BeNomic EasyLeaf Manual de usuario

Powermate

Powermate LiftGate LG-3 Manual de usuario

Snorkel

Snorkel TM12 Series Manual de usuario

Terberg

Terberg OMNIDEKA Manual de usuario

Harmar Mobility

Harmar Mobility AL625 Instrucciones de funcionamiento

Rotary

Rotary SPO16 Manual de usuario