FlexLink X45 Manual del operador
Created by EBCCW 96:05Created by EBCCW 00:06Created by EBCCW 96:05Created by EBCCW 00:06
Conveyor system X45
C
r
eated by EBCCW 00:06
5113196-3
User Documentation
Created by EBCCW 96:05Created by EBCCW 00:06
Created by EBCCW 96:05Created by EBCCW 00:06Created by EBCCW 96:05Created by EBCCW 00:06
Conveyor system X45
C
r
eated by EBCCW 00:06
5113196-3
Created by EBCCW 96:05Created by EBCCW 00:06
Created by EBCCW 00:06
Conveyor system X45
5113196-3
© Flexlink AB 2010
All Rights Reserved
No part of this program and manual may be used, reproduced, stored or
transmitted in any form or by any means without the written permission of
FlexLinkComponentsAB.Thecontentsofthismanualareforinformational
use only. All information and specifications contained in this document
have been carefully checked to the best efforts of FlexLink Components
AB, and are believed to be true and accurate as of time of publishing.
However, due to continued efforts in product development FlexLink
Components AB reserves the right to modify products and its manuals
without notice.
FlexLink Components AB assumes no responsibility or liability on any
errors or inaccuracies in this program or documentation. Any kind of
material damages or other indirect consequences resulting from any
FlexLink Components AB´s product part, documentation discrepancies
and errors or non-anticipated program behavior are limited to the value of
appropriate products purchased from FlexLink Components AB. The
products are delivered to thecustomer at the ’as is’ state and revisionlevel
they are on the moment of purchasing, and are declared in detail in the
license agreements between FlexLink Components AB and user. User
accepts and is obliged to follow the guidelines stated in the separate
license agreement needed in using any parts of this product package.
User Documentation
5113196-3
Preface
Created by EBCCW 00:06
1
5113196-3
Preface
Purpose of this manual
The purpose of this manual is to describe a number of operations that are
intended for the user concerned. Here it becomes clear how the user can
work as well and as safely as possible. By making use of clear illustrations
and texts FlexLink wants to achieve a simple and safe way of working with
the X45 system. This document contains remarks that point out a risky or
specific situation to the user. In many cases this situation is provided with
one of the symbols given below.
Compliance with the operations described in this document is important in
ordertopreventdangeroussituationsandunnecessarydamagetothe X45
system.Carefullykeepthisdocument!It isrecommendedtokeeponecopy
near the conveyor system and one copy with your technical documenta-
tion.
Structure of the manual
The user’s manual has been composed in such a way, that a number of op-
erations can quickly and easily be found. This manual will not describe op-
erations that are notmeant for the user. It does, however, indicate what the
user must do when carrying out a certain operation, for example calling in
technical staff. FlexLink would like to point out to the user that section 1
Safety is to be read carefully.
.
General warning for danger!
.
Warning for electrical voltage!
.
Attention, this is an important notice!
Preface
25113196-3
Requirements of the user
The X45 Conveyor system must be operated by any adult person who has
become acquaintedwith section 1 Safety. If the user is not technically qual-
ified, he or she may not carry out any maintenance or repair activities on
the system.
. Note! Maintenance activities on the system may only be carried
out by a technically qualified person.
. NB: Technically qualified employees means: employees that
have followed an adequate training for carrying out the activities
involved and have a good ability to read and understand the
English language.
Safety
Created by EBCCW 00:06
3
5113196-3
1 Safety
The X45 conveyor system has been designed in such a way, that it can be
used and maintained in a safe way. This holds for the application, the cir-
cumstances and the instructions described in the manual. Any person
working with or on this system should study the manual and follow the in-
structions. It is the responsibility of the employer to make sure that the em-
ployee is familiar with and follows these instructions.
The company or the country in which the system is used may require extra
safety measures. This particularly applies to the working conditions. This
manual does not describe how these are to be complied with. In case of
doubt, consult your government or safety officer!
1.1 System information
The project number and/or general drawing number shall always be spec-
ified when communicating with FlexLink with respect to the module.
Figure 1 Module nameplate
The modules nameplate is located on the module nearthe electrical motor
for the drive unit.
Project number See module nameplate
Supplier FlexLink Systems Polska Sp z o.o.o
Module type: See module nameplate
Date of manufacture See module nameplate
Identification. no. See module nameplate
Safety
45113196-3
1.2 The most important safety conditions
At the moment that the X45 system is going to be operated by a user, the
following safety conditions must be met:
• Only persons who have read and understood the operating in-
structions are allowed to operate, maintain and clean the system.
• Provide good ambient lighting to enable the operator to work well
and orderly with the system.
1.2.1 General
. • Incorrect use of the equipment can cause personal injury.
• Do not wear clothing or other articles that can fasten.
• Follow the instructions in this user manual when transporting the
machine. FlexLink Components AB must approve all modifica-
tions or changes to this system.
• Only use recommended spare parts.
• Only authorised personnel may open electrical units.
• FlexLink is not responsible for damage if service on the equip-
ment is not performed in accordance with this user manual.
1.2.2 Service technicians
. Service technicians must have:
• Sufficient knowledge for reading technical information
• Ability to comprehend technical drawings
• Basic knowledge of mechanics
• Sufficient knowledge in the use of hand tools
Tabla de contenidos
Otros manuales de Accesorios de FlexLink
