FLEXICON®BULK-OUT®Bulk Bag Discharger Installation and Operation Manual - 1 -
FLEXICON CORPORATION 2400 Emrick Boulevard ■ Bethlehem, PA 18020-8006 USA
Tel: 1-888-FLEXICON ■ Tel: 1-610-814-2400 ■ Fax: 1-610-814-0600 ■ www.flexicon.com
Copyright 2003 FLEXICON®
FOREWORD
Thank you for purchasing a BULK-OUT®Bulk Bag Discharger from FLEXICON®. Please refer to the
following instructions for installing and operating your FLEXICON®Bulk Bag Discharger system. If
you encounter any problems which prevent safe reliable installation and / or operation of the system,
please call the FLEXICON® service department immediately to address any concerns you may have.
The BULK-OUT®Bulk Bag Discharger appearance may be slightly different than the details depicted
in this manual. Any differences do not affect the function, designed capacity, or operation of the
equipment.
FLEXICONCorporation has made every effort to ensure the accuracy and validity of this document
however errors and omissions may have occurred. If an error or omission is found, please contact
FLEXICONCorporation.
No part of this publication may be distributed, reproduced or transmitted in any form without the
written permission of the FLEXICONCorporation.
Familiarity with Manual and Regulations
In order for this machine to be installed, operated, cleaned & maintained safely, all of the provisions
of this manual and all other applicable codes and regulations, some of which have been referred to
herein, must be strictly adhered to. Codes and regulations enacted to protect personnel from hazard
of injury may change from time to time. It is the customer’s responsibility to remain familiar with, and
to comply with all codes, and regulations related to this equipment or its use. It is also the customer’s
responsibility to teach its employees how to operate the equipment properly, including how to
recognize and avoid risks. All personnel who will be involved in installing, operating, cleaning or
maintaining the system should be given a copy of this manual to read, and follow.
Documentation Package
Each bulk material handling system from Flexicon®is supplied with a USB Flash Drive containing a
Documentation Package that was specifically prepared for the equipment provided. This Flash Drive
contains manuals, drawings, schematics, video clips and spare parts lists that will be a useful
reference for proper installation, operation, and maintenance of your system. If you cannot locate
this Flash Drive then please see the Contacting FLEXICON®page of this manual for the telephone
number and the information required to identify your material handling system and its components.
