FLAMENEO PYRAMID Manual de usuario
INSTALLATION MANUAL
!
model “PYRAMID”
!
2
WELCOME
Thank you for choosing the product
FLAMENEO
You are only a"few steps away from your experience
with your fireplace
“PYRAMID”
3
PACKAGING
All the components have been packed so they are
delivered safely and without damage.
Take out the components carefully and keep the box for
the case of claim or return of the product.
4
CONTENT OF THE PACKAGING
(A)
Fireplace
base
1x
(B)
Grate
1x
(C)
Stopper
1x
(D)Holder
of the
fireplace
base
3x
(E) Side
part of the
fireplace
3x
(F)
Connecting
plate#
3x
(G)
Nut pad
12x
(H)
Nut
12x
(I)
Key
1x
(J)
Poker
1x
5
INSTALLATION
In the following 5 steps we will present you the
installation process.
Ask a"second person for assistance. It will be easier,
safer and more fun.
6
STEP 1
1. Put the fireplace holder (D) into the prepared openings
on the inside of the side part of the fireplace (E).
2. While inserting, expand both sides of the side part of the
fireplace (E) as the arrows show in the picture below.
3. Repeat the process 3 times so the holder (D) is on each
side part of the fireplace (E)
4. Make sure that the orientation of the holder (D) is
identical to the image in the picture below.
7
E
D
3x
STEP 2
1. Place 2 side parts of the fireplace (E) to each other.
2. Put on the connecting plate (F) with twists into the
openings on the side parts of the fireplace (E)
3. With the help of the nuts (H) secure the connetion of the
side parts of the fireplace (E). Place the pads (G) under
the nuts (H). Use the key (I) to tighten.
4. Repeat the process 3 times so all three side parts of the
fireplace (E) are connected.
!
8
E
F
G, H, I
4x
E
3x
STEP 3
1. Put the fireplace base (A) onto the holders of the
fireplace base (D)
2. While putting in the fireplace base (A) be careful not to
damage the side parts of the fireplace (E).
3. We recommend to keep the protection covers of the
edges and remove these only after the placement of the
fireplace base (A).
9
A
STEP 4
1. Place the stopper (C) onto the opening of the fireplace
base (A). You will avoid that the ashes get onto the floor.
2. Make sure that the orientation of the stopper (C) is
identical to the image in the picture below.
!
10
C
Tabla de contenidos
