www.FlameBossVideos.com
9
The main screen shows the set temperature, pit temperature, fan speed, and the meat
temperature. (The set temperature is the temperature you want the pit to be.)
To change the set temperature just press Up or Down.
Press Menu to see other screens.
Pressing Menu enough times will bring you back to the main screen.You can also just
wait 15 seconds to go back to the main screen automatically.
The other screens are:
•Timer Set
•Timer Start/Stop
•Meat Alarm Mode - Off, Sound - Beeps to let you know the meat is done, Warm -
automatically lowers the set temp to keep meat warm after it is done.
•Meat Alarm Temp - Desired meat temperature
•Warm Temp - Pit temperature desired after meat is done
On Flame Boss 200 Only:
•Wifi On/Off
•Wifi Status or Server Name with Device ID and PIN
•Wifi Configuration Screens (see Setting up Wifi)
•LCD Contrast
•Temp Scale
•Factory Reset
On each screen just press Up or Down to change the setting, or press Menu to save your
setting and go to the next screen.
Using Flame Boss
Setting up Wifi
Flame Boss 200 has a Wifi interface that allows you to monitor and control your Flame
Boss from any smart phone or computer on the Internet. But first you have to configure
the controller to connect to Wifi.
