FiT DISPLAY COMPACT+ Manual de usuario
INSTRUCTION MANUAL
Biketec GmbH
Luzernstrasse 84
CH-4950Huttwil
T +41 62 959 53 00
info@biketec.ch
fit-ebike.com
FIT DISPLAY COMPACT +
FIT REMOTE BASIC
NETWORKED
CUSTOMISED
INTELLIGENT
500085 | 500092 | 501262
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
TABLE OF CONTENTS
1 PREFACE 4
2 ABOUT THESE OPERATING INSTRUCTIONS 5
2.1 MANUFACTURER................................................. 5
2.2 LANGUAGE..................................................... 5
2.3 DECLARATIONOFCONFORMITY ........................................ 5
2.4 ONINFORMATION ................................................ 5
2.5 WARNINGS IN THESE OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 SAFETY INSTRUCTIONS 6
3.1 GENERALINFORMATION............................................. 6
3.2 OPERATINGELEMENTANDDISPLAY...................................... 6
4 PRODUCT AND TECHNICAL SPECIFICATIONS 7
4.1 FITDISPLAYCOMPACT.............................................. 7
4.1.1 DISPLAYANDSETTINGS......................................... 7
4.2 OPERATINGELEMENT .............................................. 8
4.3 PROPERUSE ................................................... 8
4.4 IMPROPERUSE.................................................. 9
4.5 TECHNICALDATA................................................. 9
4.5.1 FITDISPLAYCOMPACT ......................................... 9
4.5.2 FITREMOTEBASIC............................................ 9
5 TRANSPORTATION AND STORAGE 10
5.1 TRANSPORTATION ................................................ 10
5.1.1 TRANSPORTINGE-BIKES........................................ 10
5.2 STORAGE...................................................... 10
5.3 BREAKINOPERATION .............................................. 10
5.3.1 CARRYING OUT A BREAK IN OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6 FITTING 11
6.1 FITTINGTHEFITDISPLAYCOMPACT ...................................... 11
7 OPERATION 13
7.1 INITIALOPERATION................................................ 13
7.1.1 ELECTRICDRIVESYSTEM........................................ 13
7.2 ASSISTANCEMODES............................................... 13
7.2.1 PUSHASSIST............................................... 14
7.2.2 BOOSTFUNCTION............................................ 14
7.3 LIGHTING ..................................................... 14
7.4 NOTICE/ERRORICON............................................... 15
7.5 MAIN/SUB-SCREENS............................................... 15
8 SETTINGS MENU 21
8.1 MENUSTRUCTURE................................................ 22
8.2 CHANGINGTHESETTINGS............................................ 22
9 ERROR MESSAGES 25
9.1 GENERALINFORMATION............................................. 25
9.2 STATUS LED ON OPERATING ELEMENT AND DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
9.3 ERRORSCREENONTHEDISPLAY ....................................... 25
9.3.1 ERRORTABLE .............................................. 26
10 CLEANING AND SERVICING 39
10.1BASICCLEANING ................................................. 39
10.1.1 CLEANING THE DISPLAY AND OPERATING ELEMENT . . . . . . . . . . . . . . . . . . . . . . . . 39
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 2
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
11 TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR 40
11.1 TROUBLESHOOTING AND FAULT CLEARANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
11.1.1 DRIVE SYSTEM OR DISPLAY DOES NOT START UP . . . . . . . . . . . . . . . . . . . . . . . . . . 40
11.1.2 ERRORS IN THE ASSISTANCE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
11.2REPAIR....................................................... 41
11.2.1ORIGINALPART ............................................. 41
11.2.2REPLACINGTHELIGHTS ........................................ 41
11.2.3ADJUSTINGTHEHEADLIGHT ...................................... 41
12 RECYCLING AND DISPOSAL 42
12.1DISPOSAL ..................................................... 42
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 3
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
1 PREFACE
Dear FIT customer,
The FIT system offers many useful functions and options and we are pleased that you have decided to choose our
system.
Please read through the operating instructions carefully to ensure you use the system safely and get off to a quick
start.
We hope you enjoy discovering the FIT’s functions and have a fun ride every time you use it.
Thank you for placing your trust in FIT.
Your FIT Team
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 4
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
2 ABOUT THESE OPERATING INSTRUCTIONS
2.1 MANUFACTURER
Biketec GmbH
Luzernstrasse 84
CH-4950 Huttwil
fit-ebike.com/en-en/
2.2 LANGUAGE
The original operating instructions are written in German. A translation is invalid without the original operating in-
structions.
2.3 DECLARATION OF CONFORMITY
Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives.
The complete EU Declaration of Conformity is available online at: fit-ebike.com/en-en/service/declaration/
2.4 ON INFORMATION
Different markings are used in the operating instructions to make them easier to read.
2.5 WARNINGS IN THESE OPERATING INSTRUCTIONS
Warnings indicate hazardous situations and actions. You will find the following warnings in the operating instructions:
DANGER
May lead to serious or even fatal injuries if ignored. Medium-risk hazard.
CAUTION
May lead to minor or moderate injuries if ignored. Low-risk hazard.
NOTICE
May lead to material damage if ignored.
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 5
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
3 SAFETY INSTRUCTIONS
3.1 GENERAL INFORMATION
Please read all safety instructions carefully. Failure to comply with the warnings or to take residual risks into ac-
count may result in electric shock, fire and/or serious injury.
Keep the operating instructions in a safe place and have them readily available to consult. Pass these instructions
on if you provide your e-bike for someone else’s use.
When used in these operating instructions, the word “battery” refers to all original FIT e-bike batteries.
3.2 OPERATING ELEMENT AND DISPLAY
Do not let the messages on the display screen distract you. If you do not focus solely on traffic on the road, you risk
being involved in an accident.
Do not open up the operating element or the display. They both can be permanently damaged if they are opened
and the warranty will become void.
Do not use the display as a handle. If you use the display to lift your e-bike, you can damage the display irreparably.
Do not place the e-bike upside down on its handlebars and saddle if the display or its mount project above the
handlebars. The display or the mount can become irreparably damaged. Also remove the display before placing the
e-bike on a work stand to ensure that the display does not fall off or get damaged.
Caution! If you use the operating element with Bluetooth, it may cause interference with other devices and equip-
ment, aircraft, and medical devices, such as pacemakers and hearing aids. Likewise, it cannot be completely ruled
out that you will cause harm to people and animals in the immediate vicinity. Avoid operating close to your body
for extended periods of time. You must observe local restrictions on using Bluetooth when in aircraft or hospitals, for
example, or in close proximity to medical devices, filling stations, chemical plants, blasting zones and areas at risk of
explosion.
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 6
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
4 PRODUCT AND TECHNICAL SPECIFICATIONS
4.1 FIT DISPLAY COMPACT
The FIT Display Compact combines the same functions in a compact 2” display as in its larger counterpart, offering
optimum visibility in a small design.
4.1.1 DISPLAY AND SETTINGS
The following display elements remain the same on all screens and show the key settings and information about the
vehicle and the current trip.
1. Clock
2. Notice/danger alert messages
3. Battery charge level
4. Light (main beam/dimmed headlight/off)
5. Current level of assistance
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 7
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
4.2 OPERATING ELEMENT
The ergonomic operating element FIT Remote Basic allows you to control the FIT Display easily and safely, even
while riding. The button backlit by LEDs and the vibration feedback ensure optimum usability, even in the dark or
while wearing gloves.
Operating
element Description
On-off button
Selector button (right, left and press)
Plus/minus button
Push assist/boost button
Light button
4.3 PROPER USE
The operating element and the display are designed to control a FIT e-bike system and display trip data.
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 8
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
4.4 IMPROPER USE
Improper use refers to use which is not described under proper use or goes beyond proper use.
4.5 TECHNICAL DATA
4.5.1 FIT DISPLAY COMPACT
Display FIT Display Compact
Product code 500085
Operating temperature °C -5 to +40
Storage temperature °C -10 to +50
Protection class IPX7
Weight about kg 0.1
4.5.2 FIT REMOTE BASIC
Operating element FIT Remote Basic
Product code 500092 (without spacer)
501262 (with spacer)
Operating temperature °C -10 to +40
Storage temperature °C -20 to +50
Protection class IPX6
Weight about kg 0.1
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 9
INSTRUCTION MANUAL FIT DISPLAY COMPACT + FIT REMOTE BASIC
5 TRANSPORTATION AND STORAGE
5.1 TRANSPORTATION
CAUTION
Remove battery before transportation.
There is a risk of injury if the drive system is switched on unintentionally.
5.1.1 TRANSPORTING E-BIKES
Protect the electrical components and connections on the e-bike from the elements with suitable protective covers.
5.2 STORAGE
CAUTION
Store e-bike, display, battery and charger in a clean, dry place where they are protected from sun-
light. Do not store outdoors to ensure a long service life.
The optimum storage temperature for your e-bike is between 10° C and 20 °C.
Temperatures under -10 °C or over +40 °C must generally be avoided.
Store e-bike, display, battery and charger separately.
5.3 BREAK IN OPERATION
If you remove the e-bike from service for longer than four weeks, you need to prepare it for a break in operation.
5.3.1 CARRYING OUT A BREAK IN OPERATION
Store the e-bike, battery and charger in a dry, clean environment. We 1recommend storing them in uninhabited rooms
with smoke alarms. Dry locations with an ambient temperature between 10 and 20 °C are ideal.
FIT_Manual_Display_Compact_Remote_Basic_V1_en | Version 01 | 04.04.2022 10
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Bicicleta de FiT
