Fission Cycles FM 750x Manual de usuario
1
USING THIS MANUAL 5
GENERAL INFO 6
Registration 6
Symbol Key 6
General Operating Rules 6
Mandatory Equipment and Use Locations 7
Changing Components or Attaching Accessories 8
Safety Check Before Each Ride 8
Accessories, Straps, and Hardware 8
SAFETY INFORMATION 9
Safety Notes 9
Battery and Service Safety 10
Brakes and Stopping Power 10
Brake Reach 11
Additional Brake Warnings 11
Throttle on Demand 12
Handlebar Stem and Front Wheel Alignment 12
Suspension, Handlebar, Grips, and Seat Adjustments 12
Tires and Wheels 13
Wheel Retention System: 13
Fork and Frame 14
Helmets 14
General Warnings 15
A Note for Parents and Guardians 15
SPECIFICATIONS 15
Specifications for FM 750x 15
Range for FM 750x 16
ASSEMBLY INSTRUCTION FOR FM 750x 17
Assembly 18
Step 1: Unpack the bike. 18
Step 2: Preparing the stem. 18
Step 3: Handlebar Installation. 18
Step 4: Front-wheel installation. 20
Step 5: Front fender installation. 21
Step 6: Put down the kickstand to support the ebike. 21
Step 7: Pedal installation. 22
2
Step 8: Inflate tires. 22
Step 9: Install saddle. 22
Step 10: Adjusting the seat position and angle. 22
Step 11: Adjusting the display and handlebar. 23
Step 12: Powering on the display. 23
BATTERY AND ELECTRICAL 24
Charging Procedure 24
Battery Charging Best Practices 25
Removing The Battery (FM750x) 26
Installing The Battery On The Bike (FM750x) 26
Charger Safety Information 27
Balancing The Battery 27
Long-Term Battery Storage 28
Recycling Used Batteries 29
Electrical System 29
Display Quick Start Guide For FM750x 30
Throttle: 32
Shifting For FM 750x: 32
How to use Thumb Throttle: 32
How to use Pedal Assist: 32
Backlight On/Off: 33
Walking Mode: 33
Lights and Reflectors Inspection 33
OPERATION 33
Guideline for Safe Riding 34
Unsafe Riding 34
Avoid Riding Too Fast: 35
Off-Road or Backcountry Riding: 35
Respect local regulations and rules / Private Property: 35
Wet Weather 35
Night Riding 36
Parking, Storage, and Transport 36
MAINTENANCE 37
Basic Bike Care 37
Maintenance and Care 37
WARRANTY INFORMATION 41
3
USING THIS MANUAL
This manual, provided by Fission Cycles™, contains details of the accompanied product, its
equipment, and information on operation, maintenance, and other helpful tips for owners. Read it
carefully and familiarize yourself with your Fission Cycles™ eBike before using it to ensure safe
operation and prevent accidents. Do not operate your eBike until you have read and understood
the entirety of this manual since there are important details related to safety in the following
sections. This manual contains many warnings and cautions concerning the safe operation and
consequences if proper setup, operation, and maintenance are not performed. Some basic
maintenance and tuning can be performed by using this manual as a guide, however detailed
repairs and general maintenance should be performed by a certified technician at a local bike
shop as this manual is not intended as a comprehensive service, maintenance, use, and or repair
manual.
Keep this manual, along with any other documents that were included with your eBike, for future
reference. All content in this manual is subject to change or withdrawal without notice. Fission
Cycles™ makes every effort to ensure the accuracy of its documentation and assumes no
responsibility or liability if any errors or inaccuracies appear within. Visit our website to
download the most recent version and view updates.
Read and understand all sections of this entire manual before operating your Fission Cycles™
eBike for the first time. There are important safety warnings throughout the manual that must be
followed to prevent dangerous situations, accidents, damage to the eBike, damage to property,
injury and or harm, or death. There are risks associated with the use of any bike that cannot be
predicted or avoided and are the sole responsibility of the rider. It is impossible to anticipate
every situation or condition that will occur while riding; this manual and by extension Fission
Cycles™ makes no representations about the safe use of bikes under all conditions.
5
GENERAL INFO
Registration
Please register your new eBike at www.fissioncycles.com/registration. By registering your
product, Fission Cycles™ can communicate updates and safety information. If you choose not to
register, make sure you check our website regularly for any new safety information. If you need
additional information, please contact us at Fission Cycles™ directly.
Symbol Key
This symbol indicated that the accompanying information refers to a potential hazard,
important warning, or safety guideline.
This symbol indicates that the accompanying information refers to a general warning
or notice.
General Operating Rules
Notice: Pay special attention to all the general operating rules below before operating your
Fission Cycles™ eBike.
●When riding, obey the same road laws as applicable by law in your area.
●Ride with the flow of traffic.
●Use correct hand signals to indicate turning.
●Ride defensively; to other road users, you may be hard to see.
●Concentrate on the path ahead and avoid obstacles and hazards that can cause the
operator to lose control or puncture a tire.
●Cross-train tracks at a 90-degree angle or walk your bike across.
●Watch for opening car doors or cars backing out of driveways.
●Be careful at intersections and when passing other vehicles or cyclists.
●Familiarize yourself with all the features and operations of the bike by Fission Cycles™
Bikes. Practice and become proficient at shifting gears, applying the brakes, using the
pedal-assist system, and using the throttle in a controlled setting before riding in riskier
conditions.
●Wear proper riding clothes including closed-toe shoes. Avoid wearing loose pants to
prevent them from being caught in the chain or gears.
●Do not use items that may restrict your hearing.
●Avoid bike stunts and/or aggressive riding
6
●Familiarize yourself with all the features and operations of the bike by Fission Cycles™.
Practice and become proficient at shifting gears, applying the brakes, using the
pedal-assist system, and using the throttle in a controlled setting before riding in riskier
conditions.
●Never strap or latch any item to your bike in an area not designed to carry gear.
●Understand the operation of the thumb switch throttle and pedal assistance sensors before
using the bike.
●Failure to perform and confirm proper installation, compatibility, proper operation, or
maintenance of any component or accessory can result in severe injury or death.
●You should check the operation of the brake motor cutoff switches before each ride. The
brake system is equipped with an inhibitor that cuts off power to the electric motor
whenever the brakes are squeezed.
●Extreme care should be taken when using the pedal assistance sensor and throttle on this
product.
●Ensure you understand and are prepared for the pedal assistance to engage as soon as
pedaling is underway.
●Only carry gear on your racks and within the standard weight limit of the rack.
●Do not ride while intoxicated or using medications that may make you drowsy.
●Any aftermarket changes to your Fission Cycles™ bike not expressly approved by
Fission Cycles™ could void the warranty and create an unsafe riding experience.
●After any accident, you must consider your bike unsafe to ride until you consult with a
certified, reputable bike mechanic for a comprehensive inspection of all components,
functions, and operations of the bike.
●Have reflectors and lights installed on your bike.
●Ride single file with other cyclists.
●Mount a horn or bell onto your bike to signal others of your approach.
●Wear bright colors and or reflective clothing.
●Check your local rules and regulations before carrying cargo.
●When braking, apply the rear brake first, then the front brake. If brakes are not correctly
applied, you may lose control and/or fall.
●Maintain a comfortable stopping distance from all other objects, riders, and vehicles. Safe
braking distances are based on factors such as road and light conditions along with other
variables.
Mandatory Equipment and Use Locations
Before riding, ensure you have all required and recommended safety equipment and are
following all laws pertaining to use an electric bike in your region. For example, these laws may
specify the need for mandatory equipment, use of hand signals, and where you can ride.
7
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of your ebike, void
your warranty, and, in some cases, cause your ebike to not conform with laws pertaining to your
bike.
The replacement of original components or installation of third-party accessories not explicitly
recommended by Fission Cycles™ for your bike model is at your own risk. Using aftermarket
accessories or components that have not been tested by Fission Cycles™ for safety and
compatibility may void your warranty, create an unsafe riding condition, damage to property or
your bike, or result in severe injury or death.
Safety Check Before Each Ride
Always check the condition of your bike before you ride in addition to having regular
maintenance performed. If you are unsure of how to conduct a complete check of the condition
of your bike before every ride, you should consult a certified, reputable bike mechanic for
assistance.
Accessories, Straps, and Hardware
Ensure all hardware is secured and all approved accessories are properly attached per the specific
component manufacturer’s instructions. It is good practice to look over all hardware, straps, and
accessories before each ride. If you discover something wrong or something that you are not sure
about, have it checked by a certified, reputable bike mechanic.
8
SAFETY INFORMATION
Safety Notes
The following safety notes provide information on the safe operation of your Fission Cycles™
bike and should be closely reviewed. Failure to review these notes can lead to severe injury or
death.
●All users must read and understand this manual before riding their Fission Cycles™ bike.
Additional manuals for components used on the bike may also be provided and should be
read before installing or using those components.
●Ensure that you comprehend all instructions and safety notes/warnings.
●Ensure the bike fits you properly before your first use. You may lose control or fall if
your bike is too big or too small.
●Always wear an approved bicycle helmet whenever riding a bike. Failure to wear a
helmet when riding may result in severe injury or death.
●Ensure correct setup, tightening, and torquing to recommended values is performed
before first use. Check the setup, tightening, and condition of components and hardware
regularly.
●It is your responsibility to familiarize yourself with the laws and requirements of
operating this product in the area(s) where you ride.
●Ensure the handlebar grips are undamaged and properly installed. Loose or damaged
grips can cause you to lose control and fall.
●Off-road riding presents variable conditions and hazards. Wear appropriate safety gear
and do not ride alone in remote areas. Check local rules and regulations about whether
off-road ebike riding is allowed.
●DO NOT ENGAGE IN EXTREME RIDING. This includes but is not limited to jumps,
and stunts. Although many articles/advertisements/catalogs depict extreme riding, this is
not recommended as you can be severely injured or killed by performing extreme riding.
●Bikes and bike parts have strength and integrity limitations and extreme riding, including
but not limited to jumps, stunts, etc., should not be performed as it can damage bike
components and/or cause dangerous riding situations in which you may be severely
injured or killed.
●Failure to perform and confirm proper installation, compatibility, proper operation, or
maintenance of any component or accessory can result in severe injury or death.
●After any accident, you must consider your bike unsafe to ride until you consult with a
certified, reputable bike mechanic for a comprehensive inspection of all components,
functions, and operations of the bike.
●Failure to properly charge, store, or use your battery will void the warranty and may
cause a hazardous situation.
9
●You should check the operation of the brake motor cutoff switches before each ride. The
brake system is equipped with an inhibitor that cuts off power to the electric motor
whenever the brakes are squeezed.
●Extreme care should be taken when using the pedal assistance sensor and throttle on this
product.
●Ensure you understand and are prepared for the pedal assistance to engage as soon as
pedaling is underway.
●Users must understand the operation of the thumb switch throttle and pedal assistance
sensors before using the bike and must take care to travel at speeds appropriate for the
usage area, riding conditions, and user experience level.
●Any aftermarket changes to your Fission Cycles™ bike not expressly approved by
Fission Cycles™ could void the warranty and create an unsafe riding experience.
●Because electric bikes are heavier and faster than normal bikes, they require extra caution
and care while riding.
●Take extra care while riding in wet conditions including decreasing speed and increasing
braking distances. Feet or hands can slip in wet conditions and lead to severe injury or
death.
●Do not remove any reflectors.
●Maintain both hands on the handlebars.
Battery and Service Safety
Remove the battery before attempting to service, make adjustments, or perform any
maintenance on your eBike. Removing the battery will help ensure that the motor does
not start inadvertently while service or maintenance is being performed.
The battery should be removed anytime the eBike is stored or left unattended to prevent
unauthorized use or accidental engagement of the motor. Keep the battery out of reach of
children. Failure to remove the battery may result in severe injury or death.
Never use a battery that is cracked or broken. Battery acid is highly corrosive and can
cause severe burns! Battery acid can burn you if it makes contact with your eyes or
skin. It can also damage personal property.
Brakes and Stopping Power
Ensure that the brakes and their system components are free from damage, properly secured, and
working correctly. When fully squeezed, both front and rear brake levers should not be touching
the handlebar. Take your bike to a certified, reputable bike mechanic to have the brakes repaired
if you find a problem.
10
Tabla de contenidos
