FishHunter Pro Manual de usuario
THE WORLD'S FASTEST
TRI-FREQUENCY, WIRELESS
PORTABLE FISH FINDER.
THE PORTABLE FISH FINDER FOR ALL FISHING TYPES
TM
WELCOME TO
FISHHUNTER™ PRO
KAYAK FISHING BOAT FISHING SHORE FISHING ICE FISHING
2
We want you to be excited and completely satisfied with your new
FishHunter™ 3D+. We think urn please visit:
VISIT OUR WEBSITE
FOR THE MOST UP-TO-DATE INFORMATION
ON HOW TO USE YOUR FISHHUNTER:
www.fishhunter.com/support
For products that were not purchased directly from FishHunter™,
please refer the the return policy for the location of purchase.
For a warranty claim, please see page 46 in this guide.
TM
3
OVERVIEW
FishHunter™ PRO is the world’s fastest and only Tri-Frequency,
wireless, portable fish finder for Apple and Android smartphones
and tablets. The sonar floats on the surface of the water and can be
cast and trolled behind your boat or placed in your ice hole where
it tracks water temperature, water depth, bottom contour and fish
locations.
The FishHunter™ PRO fish finder sonar connects to your
smartphone / tablet via Wi-Fi using our free software APP, so you
don’t need to have a cell tower connection or use your cellular data
to use your new fish finder.
Using our free FishHunter™ PRO software app, you will also have
the ability to access and store critical fishing information like your
favourite fishing spots, your catch details and share your
information with your friends and other fishermen.
4
™
FISHHUNTER™
FRONT
VIEW
Night-time Fish Attraction
Illumination
Towing Point
5
PRO
BOTTOM
VIEW
Tri-Frequency Transducer
( 381KHz, 475 KHz, 675 KHz )
USB Charging Port
1
6
HOW TO CHARGE
Charging your FishHunter™ PRO can be done in 4 easy steps:
Step 2: Locate the 3 pin charging
port on the bottom of the sonar. It
is on the opposite side from the tow
point at the back of the sonar.
Step 1: Take the USB charge cord
from the box and hold the end that
has 3 pins holes in it.
Step 3: Push the USB cord into the
bottom of the sonar so that it fits in
snugly.
Step 4: Plug the USB cord into the
charger or any USB charging port.
A red light should appear on the top
of the sonar and stay on until fully
charged. When fully charged the
sonar will light up green.
For any additional questions please
see the video at:
www.fishhunter.com/support
7
95% OF THE FISH
ARE IN 5% OF THE WATER
KNOW WHERE TO CAST™
8
HOW TO CONNECT
Download the FishHunter™ PRO app from the Google play
or iOS app store.
Create an account inside the app by opening the app and
following the steps on the screen.
Ensure you have charged your FishHunter™ PRO for 4 hours
before first usage. (Note: when charged, a green light will
appear on the top of the sonar)
Connect your FishHunter™ PRO to the braided line on the end
of your fishing line or tether it to the red leash that was provided
in your box by threading the red leash through the tow point on
the front of your FishHunter™ PRO.
Drop the FishHunter™ PRO into the water beside your current
position.
The unit will turn on when placed in water and will start slowly
flashing red from the top of the unit to let you know it is ready
for a connection.
On your smart phone or tablet open your Wi-Fi settings. Refresh
the list and select FishHunter PRO XXXX in the Wi-Fi networks
list. (Note: it may take up to 1 minute for it to appear initially)
1
2
3
4
5
6
7
9
Wait for your phone/tablet to tell you that you are “connected” to
FishHunter™ PRO Wi-Fi.
Once connected, open your FishHunter™ app on your smart
phone or tablet and go to the “Sonar” section. Select the type of
FishHunter™ PRO sonar that you have. (Note: Bluetooth option
does not apply to your device)
Select one of the following functions you would like to use:
Start Fishing: allows you to use the sonar and offers dif-
ferent view modes. Press on one of these modes to activate
your sonar.
i. Fishing
ii. Ice Fishing
Demo Mode: will allow you to see how the sonar will work
when not connected to a sonar.
When your sonar is connected a slow red flashing light will
appear and begin sending information to your device app.
The sonar will turn off when not in water and power down
automatically. To get it working again, repeat steps 7 -10.
RESET YOUR SONAR ANY TIME BY PLUGGING
IN THE CHARGE CORD AND REMOVING IT.
9
10
11
12
8
10
WI-FI CONNECTIVITY & FISHHUNTER
For more information,
visit www.fishhunter.com/wifi-coverage
Otros manuales para Pro
2
Tabla de contenidos
Otros manuales de Buscador de peces de FishHunter
